Detimeter detection electronic magnet switch MMS before contacting the component to the component-MMS 22-S-M8-NPN
Detimeter detection electronic magnet switch MMS before contacting the component to the component-MMS 30-S-M8-PNP
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Sunk Japan Co., Ltd.

Detimeter detection electronic magnet switch MMS before contacting the component to the component
Sunk Japan Co., Ltd.


About This Product

Use an electromagnetic switch for the status of the automation component. The approach of the magnet to the component is detected before the contact, and the digital signal is output when the switching value is exceeded. Advantages and benefits ■ Installation in the sensor groove Space -saving and easy to assemble on the product ■ LED display specification Directly control the switching position with a sensor ■ Standard plug connector specification Extended cable can be quickly and simple replacement ■ Flexible cable in PUR version Long life Options, others ■ ATEX version EX For explosive environments ■ High protection grade For plug -ins, for use in a protection grade IP67, a clean environment, dust and dirt environment, or contact with water. It is often possible to use it in a situation where there is contact with other media (coolant, acid, base, etc.), but chunks do not guarantee any. ■ Power supply 10 ~ 30 V DC (with residual ripple <10%) ■ Causes of interference The sensor is affected by the nearby magnetic field. The source of the magnetic field that hinders is motor, electric welding machine, permanent magnet, wrench and chips (soft magnets). * There are other part numbers.

  • Product

    Detimeter detection electronic magnet switch MMS before contacting the component to the component

Share this product


450+ people viewing

Last viewed: 13 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

10 Models of Detimeter detection electronic magnet switch MMS before contacting the component to the component

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Cable connector/cable edge Cable design (wire cross section/number of core lines) Cable diameter D (mm) Cable length L (cm) Cable sheath material Drilling emulsion resistance * Housing material Maximum operation voltage Maximum surrounding temperature (℃) Maximum switching current Measurement principle Minimum peripheral temperature (℃) Nominal voltage Number of switching points Opening and closing function Opening and closing type Polar reversal prevention Protection grade Protection grade IP (sensor, connected state) Sensor LED display Short circuit prevention Small bending radius (dynamic) (mm) Small bending radius (static) (mm) The minimum operating voltage Type with side cable outlet Voltage drop (V) Voltage type weight
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 22-S-M8-NPN

MMS 22-S-M8-NPN

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be PA 30 80 0.05 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 Ten - 2 DC 0.01
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 22-S-M8-NPN-SA

MMS 22-S-M8-NPN-SA

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR - PA 30 80 0.05 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 Ten can be 2 DC 0.01
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 22-S-M8-PNP

MMS 22-S-M8-PNP

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be PA 30 80 0.05 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 Ten - 2 DC 0.01
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 22-S-M8-PNP-SA

MMS 22-S-M8-PNP-SA

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR - PA 30 80 0.05 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 Ten can be 2 DC 0.01
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 30-S-M8-PNP

MMS 30-S-M8-PNP

Available upon quote M8 - 3.5 30 - - - 30 70 0.2 Magnetism -twenty five twenty four 1 Closer PNP - - 67 none - 35 17.5 Ten - 1.5 DC 0.04
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMS 30-S-M12-PNP

MMS 30-S-M12-PNP

Available upon quote M12 - 3.5 30 - - - 30 70 0.2 Magnetism -twenty five twenty four 1 Closer PNP - - 67 none - 35 17.5 Ten - 1.5 DC 0.02
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMSK 22-S-NPN

MMSK 22-S-NPN

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR can be PA 30 80 0.05 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 Ten - 2 DC 0.02
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMSK 22-S-NPN-SA

MMSK 22-S-NPN-SA

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR - PA 30 80 0.05 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 Ten can be 2 DC 0.02
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMSK 22-S-PNP

MMSK 22-S-PNP

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR can be PA 30 80 0.05 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 Ten - 2 DC 0.02
Detimeter detection electronic magnet switch MMS before contacting the component to the component-Part Number-MMSK 22-S-PNP-SA

MMSK 22-S-PNP-SA

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR - PA 30 80 0.05 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 Ten can be 2 DC 0.02

Click on the part number for more information about each product

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.


View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree