Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity-EGU 50-EC-M-SD

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

13.2hours

Relatively Fast Response

About This Product

Advantages and benefits
■ Handling of flexible workpieces by Joe Stroke that can be programmed for a long timeRealizes flexible work handling by large joke stroke that can be used continuously and can be programmed freely.

■ Robust and high reliabilityThe closed design and the proven guidance are ideal for the harsh environment conditions of the machine load.

■ The best process reliabilityAvoid the loss of work by integrating the grip -powered power due to loss detection

■ Always seeWith the built -in Absolute encoder, both emergency and power blocks are possible.

■ 100%knowledge force without starting distanceThe built -in spar gear can provide almost a constant grip for the total length of the nails.

■ Easy integrationThe wide communication interface, PLC function blocks, and robot plugins are compatible with major market manufacturers.

Options, others
■ Memorial modeThe grip mode includes BASICGRIP and STRONGGRIP. BasicGrip can be a permanent re -grasp of the work by continuous operation of the motor. The grant speed is automatically optimized to adjust the groom.

STRONGGRIP remembers the maximum pity and then remembers it in the maintenance function. It is possible to make a permanent reconciliation within the adjustable time frame. Also, in STRONGRIP mode, it is necessary to consider the specified pause time and maximum surrounding temperature. See the instruction manual for details.

■ Mechanism of grooming forceIn the case of an emergency stop or a voltage drop, the combination of the electrical holding brake and the initial tension of the elastic body can maintain 80% or more of the original knowledge. If you can prevent grooming and positioning, you can retain 100 % of the first positive strength.

The finger overrun when removing the work is about a few millimeters, which depends on the generated groom. There is also an option and there is also a version with no knowledge holding function.

■ AttentionGripper has enhanced the protection function for the entry of dust and liquids by default. IP protection of electronic devices is effective only when the plug cononer is properly attached. The gripper gearbox is further protected by a sticker on the main shaft.

■ Interface with Base JoeWhen using the intermediate block, the base joe interface supports the general-purpose gripper PGN-PLUS-P interface. This means that a wide range of pgn-plus-P nail accessories can be used for this gripper in consideration of the application limit applied to the interference contour.

Model
There are 10 models for this product.

Product
Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Handling Company
Sunk Japan Co., Ltd.

Categories

Conveyors

Grippers

530+ people viewing

Last viewed: 8 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Stroke / Joe (mm)	Maximum maximal power (n)	Most maximum personal (n)	Maintenance of the smallest maximal strength X (%)	Maintenance of maximum maximum (%)	Maximum allowable finger length (mm)	Maximum allowable weight / finger (kg)	Repeated accuracy (gripping) (mm)	Repeated accuracy (positioning, one direction) (mm)	Repeated accuracy (positioning, two directions) (mm)	Closed time (S)	Opening time (S)	Maximum speed (positioning) (mm/s)	Maximum acceleration (mm/s²)	Weight (kg)	Minimum peripheral temperature (℃)	Maximum surrounding temperature (℃)	IP protection grade, electronic equipment	IP protection grade, guide/base joe	Clean room grade ISO 14644-1: 2015	Length x (mm)	Width Y (mm)	Height Z (mm)	Nominal voltage (V)	Communication interface	BASICGRIP Nominal current consumption (a)	Basicgrip maximum current consumption (A)	STRONGRIP Nominal current consumption (a)	Stronggrip maximum current consumption (A)
EGU 50-EC-M-SD	Available upon quote	41	210	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.52	5	55	67	64	5	122	72	88	24	EtherCat	0.3	1.44	0.48	0.72
EGU 50-EC-N-SD	Available upon quote	41	210	300	-	-	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.47	5	55	67	64	5	122	72	88	24	EtherCat	0.24	1.23	-	-
EGU 50-EI-M-SD	Available upon quote	41	210	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.52	5	55	67	64	5	122	72	88	24	Ethernet/IP	0.3	1.44	0.48	0.72
EGU 50-EI-N-SD	Available upon quote	41	210	300	-	-	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.47	5	55	67	64	5	122	72	88	24	Ethernet/IP	0.24	1.23	-	-
EGU 50-IL-M-SD	Available upon quote	41	210	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.52	5	55	67	64	5	122	72	88	24	IO-Link	0.3	1.44	0.48	0.72
EGU 50-IL-N-SD	Available upon quote	51	150	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.49	5	55	67	40	5	122	72	88	24	EtherCat	0.3	1.44	0.48	0.72
EGU 50-MB-M-SD	Available upon quote	51	150	300	-	-	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.44	5	55	67	40	5	122	72	88	24	EtherCat	0.24	1.23	-	-
EGU 50-MB-N-SD	Available upon quote	51	150	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.49	5	55	67	40	5	-	-	-	24	Ethernet/IP	0.3	1.44	0.48	0.72
EGU 50-PN-M-SD	Available upon quote	51	150	300	-	-	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.44	5	55	67	40	5	122	72	88	24	Ethernet/IP	0.24	1.23	-	-
EGU 50-PN-N-SD	Available upon quote	51	150	450	90	100	80	0.4	0.02	0.05	0.15	0.8	0.8	110	800	1.49	5	55	67	40	5	122	72	88	24	IO-Link	0.3	1.44	0.48	0.72

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

520+ people viewing

Last viewed: 13 minutes ago

Response time: 13.21 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 7 hours ago

Response time: 13.21 hours

Grippers

10 models listed

High performance electric gripper GR1 series

PSi Corporation

300+ people viewing

Last viewed: 9 minutes ago

Response time: 73.96 hours

Grippers

4 models listed

D-HAND 3-finger hand, a multi-fingered, multi-jointed robot hand that can grasp anything

Double Giken Co., Ltd.

90+ people viewing

Last viewed: 25 minutes ago

Response time: 27.99 hours

Grippers

3 models listed

Clip-only type for textiles

Taihei Koki Co., Ltd.

80+ people viewing

Grippers

2 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

870+ people viewing

Last viewed: 6 minutes ago

Response time: 13.21 hours

Grippers

30 models listed

D-HAND 5-finger hand, a multi-fingered, multi-jointed robot hand that can grasp anything

Double Giken Co., Ltd.

80+ people viewing

Last viewed: 15 hours ago

Response time: 27.99 hours

Grippers

3 models listed

For textiles, pin/clip type

Taihei Koki Co., Ltd.

60+ people viewing

Grippers

2 models listed

[For palletizing] Collaborative robot electric gripper “2FGP20” / OnRobot

Daiki Sangyo Co., Ltd.

160+ people viewing

Last viewed: 6 minutes ago

Response time: 14.39 hours

Grippers

3 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

620+ people viewing

Last viewed: 10 hours ago

Response time: 13.21 hours

Grippers

20 models listed

Horizontal pin chain for textiles

Taihei Koki Co., Ltd.

70+ people viewing

Grippers

2 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1180+ people viewing

Last viewed: 6 hours ago

Response time: 13.21 hours

Grippers

10 models listed

See More Grippers Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

520+ people viewing

Last viewed: 13 minutes ago

Response time: 13.21 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 7 hours ago

Response time: 13.21 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

870+ people viewing

Last viewed: 6 minutes ago

Response time: 13.21 hours

Grippers

30 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

620+ people viewing

Last viewed: 10 hours ago

Response time: 13.21 hours

Grippers

20 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1180+ people viewing

Last viewed: 6 hours ago

Response time: 13.21 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

970+ people viewing

Last viewed: 14 minutes ago

Response time: 13.21 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

460+ people viewing

Last viewed: 12 minutes ago

Response time: 13.21 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

450+ people viewing

Last viewed: 8 hours ago

Response time: 13.21 hours

Grippers

30 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

450+ people viewing

Last viewed: 19 minutes ago

Response time: 13.21 hours

Grippers

10 models listed

Bringpoint opening and closing type Gripper Small and simple pressure type plastic anger gripper, SGW with spring return

Sunk Japan Co., Ltd.

310+ people viewing

Response time: 13.21 hours

Grippers

3 models listed

PGN-PLUS / PZN-PLUS compatible shaft interface with gripper GSW-B

Sunk Japan Co., Ltd.

350+ people viewing

Last viewed: 5 minutes ago

Response time: 13.21 hours

Grippers

5 models listed

Accurately record the position of the gripper Joe Analog Position Sensor APS-M1

Sunk Japan Co., Ltd.

290+ people viewing

Last viewed: 3 hours ago

Response time: 13.21 hours

Position Sensors

2 models listed

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

13.2hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

About This Product

■ Handling of flexible workpieces by Joe Stroke that can be programmed for a long time

■ Robust and high reliability

■ The best process reliability

■ Always see

■ 100%knowledge force without starting distance

■ Easy integration

■ Memorial mode

■ Mechanism of grooming force

■ Attention

■ Interface with Base Joe

10 Models of Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.

About Company Handling This Product

Related search keywords

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity
Sunk Japan Co., Ltd.