All Categories

History

Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint-Suppon® MD joint
Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint-Kawa Nishi Water Waterway Equipment Co., Ltd.

Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint
Kawa Nishi Water Waterway Equipment Co., Ltd.

Kawa Nishi Water Waterway Equipment Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

25.3hours

Relatively Fast Response


About This Product

"Suppon MD joint" is a joint with excellent earthquake resistance. The elastic turtle top ring absorbs earthquake energy and exerts the effect of reducing the stress and distortion applied to the joint. The construction is easy because the joint pipe can be pulled out without resistance without disassembly.

■ earthquake resistance

・ The elastic turty MD stop ring absorbs earthquake energy and exerts the effect of reducing the stress and distortion applied to the joint. -The elasticity MD stop rings absorb the distortion of the tube caused by the earthquake due to the synergistic effect of the captain of the depression and the adjacent joint. ・ We also maintain sufficiently safe earthquake -resistant performance for earthquake motion level 2 (90 % non -excessive probability, soft landing assumption). ・ At the time of an earthquake, tensile and compressed force acts on the fitting of the straight tube. Absorb the tube strain caused by large ground displacement due to the elasticity of the turtle MD stop ring. ・ The tensile force does not work only for the rotation force of the curved pipe part. For this reason, a turning prevention performance for water pressure and a turningless turning moment is the best way to absorb the bending moment.

■ Construction and recovery

・ You can pull the joint pipe without resistance without disassembling the joint. ・ The number of tightening bolts can be reduced and the construction time can be reduced. (DCIP) ・ Because it is a double -piped structure, it can be connected by cutting tube. (DCIP) ・ The tube and joint can be separated simply by loosening the bolt nut without disassembling, making it easier to rebuild. ・ Supon MD core packing can be restored after construction and can be easily removed.

■ Packing

・ The turtle MD packing (patent) has achieved watertails of 4MPa or more with low torque (20N / m), which is significantly below the standard tightening torque, even in tubes with large tolerance. -The packing convex portion is compressed on the receiving taper and pipe surface, and the gap is rolled in a ring, so the packing is reduced on average with a light tightening force and is effectively compressed. Therefore, it realizes excellent watertightness without a slide. ・ As the MD stop ring becomes independent with the pushing ring, the withdrawal does not act on the pushing ring and does not inhibit the water dust.

  • Product

    Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint

Share this product


430+ people viewing

Last viewed: 15 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint

Image Part Number Price (excluding tax) For nominal diameter ductile cast iron pipe For the nominal diameter and outer and outer steel pipes Forced to prevent withdrawal (KN) for ductile cast iron tubes For pressure -resistant ductile cast iron tube For pressure -resistant inner and outer steel pipes Telescopic amount (mm) For ductile cast iron pipe For expansion and contraction (mm) for steel tube in the inside and outer League for leaving (mm) Dactile cast iron tube Tacable angle
Dactile cast iron pipe (DCIP), inner and outer coating steel pipe (PD / VD steel pipe) turtles ® MD joint-Part Number-Suppon® MD joint

Suppon® MD joint

Available upon quote

75 ~ 150

40 ~ 150

52 ~ 118 or more

6MPa (1 minute)

6

9.0 ~ 15.0 or higher (one entrance)

9.0 or higher (one entrance)

32 ~ 41 or more

± 4 ° (one entrance)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Pipe Joints Products

Other products of Kawa Nishi Water Waterway Equipment Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Kawa Nishi Water Waterway Equipment Co., Ltd.

About Company Handling This Product

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree