Easy poly tube (JIS) / SUS tube M -joint® that can be used for various tubes-Polytophone (JIS) / SUS tube M -joint®

Easy poly tube (JIS) / SUS tube M -joint® that can be used for various tubes
Kawa Nishi Water Waterway Equipment Co., Ltd.

About This Product

The "Suppon M joint" is for PVC tubes, steel pipes, poly tubes (JIS), and SUS tubes, and a wide range of tubes can be connected. For PVC and steel pipes, you can easily rebuild the bolt nut. Polytop) and SUS tubes can be connected without an in -core, and there is no hassle of core insertion.

■ Features
-The MV stop ring for poly tube (called outer diameter 40-200) is an earthquake -resistant bracket that can withstand a tube strain of 3 % or more without an in -core for the PE tube (JIS outer diameter (PE100)). Please contact us for other pipes.
・ Used temperature: Use up to 60 ° C for short term up to 45 ° C. If the hot water is 45 ° C or higher, please contact us.
・ The MV stop ring for poly tube (called the named diameter 40-200) can also be used for PVC tubes and steel pipes.

Model
There are 1 models for this product.

Product
Easy poly tube (JIS) / SUS tube M -joint® that can be used for various tubes

Handling Company
Kawa Nishi Water Waterway Equipment Co., Ltd.

*Please note that we may not be able to accommodate sample requests.

1 Models of Easy poly tube (JIS) / SUS tube M -joint® that can be used for various tubes

Product Image	Part Number	Price (excluding tax)	Negative pressure test conditions	Negative pressure test result	Palm test purpose	Polar hypothetid pressure test conditions	Pulling test conditions	Pulling test result	Purberable low internal pressure test purpose	Purberable low internal pressure test result	Purdoll test purpose	Purpose of negative pressure testing	Type test conditions	Type test result	Water pressure test conditions	Water pressure test purpose	Water pressure test result
	Polytophone (JIS) / SUS tube M -joint®	Available upon quote	-54kpa (2 minutes)	There is no air inhaling, other abnormalities	Confirm the pressure resistance of the junction when a flat is added to the pipe.	Halm temperature 20 ± 15 ° C, internal pressure (empty pressure) 0.2MPa, tensile speed 25mm/min	Room temperature 20 ± 15 ° C Constant shaft load / static load (1 hour), without pressure	There is no air inhaling, other abnormalities	Confirm the pull -out force in a model with a lower internal pressure than the actual use.	The joining strength is 3 % of the bonding tolerance.	The water pressure of the junction of the pipeline is measured.	Make sure that there are no other impregnations in the pipes.	30 mm, 30 % flat, 0.2MPa 1.75MPa (2 minutes each)	Leak, damage, no other abnormalities	1.75MPa (1 hour)	The water pressure of the junction of the pipeline is measured.	Leaks, escaping, no other abnormalities

Customers who viewed this product also viewed

Excavation piping pipe connector TB Nigata Wing Union

TB Global Technologies Co., Ltd.

Pipe Joints

3 models listed

It is possible to support various tubes and can easily construct PVC tubes and steel pipes M -joint®