It is possible to support various tubes and can easily construct PVC tubes and steel pipes M -joint®
Kawa Nishi Water Waterway Equipment Co., Ltd.
About This Product
The "Suppon M joint" is for PVC tubes, steel pipes, poly tubes (JIS), and SUS tubes, and a wide range of tubes can be connected. For PVC and steel pipes, you can easily rebuild the bolt nut. Polytop) and SUS tubes can be connected without an in -core, and there is no hassle of core insertion.
■ High -performance turtles MV stop rings (patent) /turtle MV packing (patent)
・ No disassembly, no slide, the same core packing
・ Achieved 4MPa (1 minute) in a low tightening torque
■ Easy relocation by just loosening bolt nuts
Sloby nuts and joints can be separated by just loosening the bolt nuts with a turtl
■ Inner and outer epoxy resin powder paint
・ Improve corrosion resistance, shock resistance, and weather resistance with internal and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer and outer outer powder paint.
・ Adopts powdered body prevention bolts and bag nuts
■ Tolerant water pressure: 1MPa
・ Telegrated water pressure = maximum water pressure (hydrogen pressure) +water strike pressure * Please contact us for 1 MPA or higher.
・ Used temperature: Use up to 60 ° C for short term up to 45 ° C. If the hot water is 45 ° C or higher, please contact us.
-
Product
It is possible to support various tubes and can easily construct PVC tubes and steel pipes M -joint®
-
Handling Company
Kawa Nishi Water Waterway Equipment Co., Ltd.
1 Models of It is possible to support various tubes and can easily construct PVC tubes and steel pipes M -joint®
| Product Image | Part Number | Price (excluding tax) | Bending pressure resistance performance standard | Bending pressure resistance test result | Decomposition test (our standard) performance standard | Decomposition test (our standard) test result | Exploring performance standard | Exploring test result | Grab width (our standard) performance standard | Grab width (our standard) test result | Pressure resistance standard | Pressure resistance test result | Tube scratch test (our standard) test results with excessive tightening torque | Tube scratch test with over -tightened torque (our standard) performance standard |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PVC tubes and steel pipes turtan M Joint® |
Available upon quote | There is a horn of ± 4 ° free of ± 4 ° in the junction, and in a 4 ° possible state, leaks with water pressure 2 MPa (1 minute), and there are no other drawbacks. | Leakage, no other drawbacks | It is easy to separate the tube and the joint with the bolt and nuts loosened three times the specified tightening torque. | Standard tightening torque 3x can be separated after construction and joint | There must be 9mm or more expansion and contraction at the joint. | There is a stretch amount of 10mm or more (one entrance) | Compatible with the width of the Japan Waterworks Association (reference), and distributed the withdrawal. | Compatibility, or more |
Leaked at 4MPa (1 minute) at the joint part, and there are no other defects. * The steel pipe for water distribution tube with a caliber of 250 and 300 is 2 MPa (1 minute) |
Leakage, no other drawbacks |
Water supply hard poly chloride tube: Safe over -tightened torque prevention type that does not damage the joint pipe Steel pipe for water pipe: Do not scratch the tube after construction in the standard tightening torque |
Tighten the specified tightening torque three times, loosen the bolt and nuts, and do not have a deep scratch on the tube surface. |
Customers who viewed this product also viewed
Other products of Kawa Nishi Water Waterway Equipment Co., Ltd.
View more products of Kawa Nishi Water Waterway Equipment Co., Ltd.
About Company Handling This Product
Kawa Nishi Water Waterway Equipment Co., Ltd.
- Japan
- Since 1952
- 196 employees