Air Blow Workbench YMS Series Basic Type
Yodogawa Electric Works
About This Product
The cut off the dirt in the factory from the root, Air Blow Workbench YMS Series
Many of the causes of dirt around the machine tools are dirt that adheres oils and cutting powder that scatters during air blow. By performing it in YMS without air blow in a machine tool, you can prevent scattering around the oil and cutting powder attached to the work after processing. Keep the area around the machine tool clean.
There are two types: a low -priced basic type, and a high -spec type with a work table and a dust processing drawer.
By setting the next work and starting processing without performing air blow to the work in a machine tool, you can shorten the machine tool stop time by airblow in the meantime. The more the work is, the more effective.
It has a unique pleated shape and has a wide filtration area, reducing clogging. Equipped with a polyester non -woven fabric + dust that is dusty with immersion in Teflon.
It is economical because it can be reused after cleaning by washing with water.
* If the ability does not recover after cleaning, or if the ability is reduced immediately, it will be replaced.
-
Product
Air Blow Workbench YMS Series Basic Type
-
Handling Company
Yodogawa Electric Works
3 Models of Air Blow Workbench YMS Series Basic Type
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Dust collection method | Filtration area (㎡) | Frequency (Hz) | Group capacity (L) | Mass (kg) | Maximum noise (DB) | Maximum time air volume (㎥/min) | Maximum time static pressure (KPA) | Number of filters used | Opening surface control wind speed (M/S) | Output (kw) | Rated current value (a) | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YMS20JB |
Available upon quote | Molded non -woven cartridge filter (for humid dust)+rear filter | 1.25 | 50/60 | 13 | 43 | 66/68 | 7.5/9.0 | 0.81/1.17 | 1 | 1.7/2.0 | 0.2 | 0.9/0.9 | 3φ200V | |
YMS40JA |
Available upon quote | Molded non -woven cartridge filter (for humid dust)+rear filter | 2.2 | 50/60 | twenty three | 65 | 71/74 | 15.0/17.0 | 1.18/1.67 | 2 | 2.1/2.4 | 0.4 | 4.4/5.2 | 1φ100V | |
YMS40JB |
Available upon quote | Molded non -woven cartridge filter (for humid dust)+rear filter | 2.2 | 50/60 | twenty three | 65 | 71/74 | 15.0/17.0 | 1.18/1.67 | 2 | 2.1/2.4 | 0.4 | 1.5/1.7 | 3φ200V |
Click on the part number for more information about each product
Other products of Yodogawa Electric Works
View more products of Yodogawa Electric Works
