About This Product
It is a new type of welding machine that allows all metals to be welded with all metal, including gold, silver, platinum, and stainless steel in fine -tuning precious metals.
Unlike a low, the heat effect on the surroundings is very small, so it is very difficult or not possible in the past, such as gems that have been said to be unable to do so, welding and repair of products and parts that are already vulnerable to heat. I made it possible. Because it is difficult to hold heat, the welding part is enlarged with a headloscope while holding a work with bare hands, so you can easily and accurately do fine work without the need for jigs.
The work characteristics and finish can have almost the same effect as the fine laser welding machine. Because it does not use low material, there is no worry about the eyes, and it is suitable for all welding work, from the burrow of the cast product to the closing of the round ring. It is a convenient one that can be used as a temporary wearer.
■ Evolved Puk6
・ Up to 3.3 firing per second is possible. The welding speed is 65 % faster.
・ The welded part has become more smooth and the homogeneous welding is possible. In addition, welding with gaps has become easier.
・ The minimum spot diameter has been reduced by 50 %, making smaller welding possible. The minimum pulse width is 0.1 ms, and the welding time in micros -mode reduced by 67 %.
■ Simple setting
Easy to use, just select welding materials on the left and select the welding scene on the right. No difficult adjustment is required.
■ New handpiece mechanism
・ As the electrode movement speed has increased by 20 % faster than before, the movement has become more agile and the life of the electrodes has been up to 50 % longer.
・ The maximum electrode thickness has become 1mm, making it easier to weld between silver products and large work.
■ Optional flesh wire
・ K18 (au750): 0.25mm x 50cm
・ K14 (au585): 0.25mm x 50cm
・ K18 WG (au750PD): 0.25mm x 50cm
・ Pt960 (PI960C): 0.25mm x 50cm
・ SV (AG940B): 0.35mm x 100cm
・ Paladium (PDAG500): 0.4mm x 50cm
・ Pure titanium: 0.3✕100cm
・ Stainless steel (Steel CMS): 0.4 x 100cm
・ Steel GS 2 (58HRS): 0.2mm x 100cm
・ Steel GS 55 (61HRC): 0.2mm x 100cm
-
-
Product
Ack spot welding machine PUK6