Dimension accuracy is reduced to a high -capacity one -shot processing cut -blade friction
Banishing Tool Co., Ltd.
About This Product
The bunicing drill / lima can be refueled and sufficiently refueled on the cutting edge without hindering the cut scraps with the cut scrap discharge groove and the lubricated groove provided in a different position, so the friction of the cutting blade. You can continue to cut and keep cutting without heating.
■ Conditions for use
1. Vanicing drill / Rima performance
Banishing is a tool name in the sense of making the surface smooth or elegant. The difference from the twist drill, which is simply called a drilled drill, is a vanicing drill / rima that allows you to use a high -efficiency single -efficiency of severe dimension accuracy, which is smooth and elegant.
2. Blade holding utensils
The adhesion and dent of cut powder and garbage on the tapered hole and taper part have a serious effect on the accuracy of the processed hole.
3. Cutting oil (dry processing is not possible)
Use of cutting oil
1. Insculator -melting oil
2. Water -melting oil
3. How to lubricate cutting oil
4. About cutting rotation
Since there are various conditions such as work material, processed hole, and used machinery, decide the number of revolutions according to the selection method according to the condition of each minute.
5. Cutting amount
Estimated cutting amount per rotation = (0.05-0.1)
The torque limit of the cone is applied to the cutting amount of the cone to the middle core, the torque limit of the cone is adjusted to 0.1.
6. Re -grinding and performance
It is performed to recover the cutting performance, but it is difficult to maintain a new life as well as other cutting tools.
7. Is the outer diameter roughness of the blade shifted to the work?
I will not move. No matter how much the outer diameter of the blade is finished on the mirror, it has nothing to do with the finish surface of the work.
8. Drill in a work with a lower hole
Since the drill tip edge has an angle, a blade phenomenon occurs on the blade, following the lower hole, causing it.
9. Insculator -soluble cutting oil
In terms of properties and effects, it is suitable for cutting oil that is "excellent lubricity", "does not evaporate against cutting friction heat", and "is strongly penetrated and satisfies the requirements for using vanishing tools".
10. Water -soluble cutting oil
As a feature, the effects that are excellent in the cooling effect of the blade and the undiluted solution can be diluted with water, so the price is low, but it lacks lubricity, heat resistance, and penetration, which are the necessary conditions for using vaning tools, so the accuracy of the processed material. It is somewhat inadequate to satisfy.
-
-
Product
Dimension accuracy is reduced to a high -capacity one -shot processing cut -blade friction