Fast feed by air, oil -powered and high -thriving air pries machine IB type (air boo star type)
Horiuchi Machine Co., Ltd.
About This Product
"Impano" is a product name of Marni's air -type device, such as pressure, caulking, assembly, and engraving.
Our standard products are relatively inexpensive for small items, and do not provide a "motion capacity machine structural standard" as a press machine.
■ Fast feed by air, increase pressure and high practices with oil
With the adoption of Air 8 Idro Boo Star Cylinder, which combines fast -forward and high thrust feed, it has enabled significant speed -ups and reducing air consumption. (Swap switches can be switched from any position in the stroke by adjusting the limit switch.)
With a stopper, it is easy to adjust the stroke. Of course, the only power source is air. Since the hydraulic power unit or hydraulic device is not used, it is clean, quiet, easy to maintain, and there is no worry about rising oil temperature.
-
Product
Fast feed by air, oil -powered and high -thriving air pries machine IB type (air boo star type)
-
Handling Company
Horiuchi Machine Co., Ltd.
2 Models of Fast feed by air, oil -powered and high -thriving air pries machine IB type (air boo star type)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Air consumption NM^3 | Connection piping | Cycle time | Mass kg | Pressure increase ratio | Reach MM | Regular air pressure | Sirinda diameter fast -feed mm | Sirinda diameter high throwing mm | Stroke MM | Stroke adjustment MM | Stroke high throwing mm | Table dimension MM | Theoretical thrust back Kn (kgf) | Theoretical thrust fast forward kn (kgf) | Theoretical thrust high thrust sending kn (kgf) | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
IB-5000 |
Available upon quote | 0.0343 | Inner diameter 015 hose, joint 40SH (socket) or higher | MAX1.75 seconds/1 cycle | 380 | 1: 9.57 | 250 | 0.5MPa (5.1kgf/cm2) | Φ125 | Φ160 | 100 | twenty five | 15 | 400x320 | 4.7 (480) | 5.3 (550) | 51.1 (5,210) | AC100V (50,60Hz common) 10W or less |
|
|
IB-8000 |
Available upon quote | 0.0488 | Inner diameter 015 hose, joint 40SH (socket) or higher | MAX2.8 seconds/1 cycle | 425 | 1: 15.41 | 300 | Regular 0.5MPa (5.1kgf/cm ~ maxo.7MPa (7.1kgf/cmf ')) | Φ125 | Φ200 | 100 | twenty five | 15 | 600x500 | 4.7 (480) | 5.3 (550) | 82.3 (8,230 ~ MAX11,520) | AC100V (50,60Hz common) 10W or less |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Horiuchi Machine Co., Ltd.
View more products of Horiuchi Machine Co., Ltd.
About Company Handling This Product
- Japan
- Since 1941
- 270 employees