Maintenance improved baffle booth BBD-H series
ANEST IWATA Corporation
About This Product
■ Maintenance is improved by newly developed V -type baffle plate (primary filter) and dedicated mounting board
・ A newly developed baffle board and a dedicated mounting board (both are applying for a patent).
-The number used for the baffle plate was reduced to about half, and the mounting plate became less dirty with paint, making it easier to replace.
■ Improve inhalation performance by inhaling in full format and opening from the entire surface of the opening.
Even models that have expanded the 0.5m frontage width due to the enlarged hood can now obtain a uniform inhalation performance by inhaling from the entire opening.
■ Adopts a large cleaning point inspection door that can be mounted on either side
-A cleaning point inspection door, which has a larger opening dimension than before, is adopted.
・ It is easier to enter and exit inside the booth when cleaning.
■ Standard equipment with fan guard set
・ Fan guard sets for ensuring safety during booth internal maintenance are standard equipment.
・ Added options to make it easier to use
■ Energy saving support
Achieves energy conservation of 10 % of our products by installing a high -efficiency motor (IE3) (depending on the model)
■ Collection principle
-The V -type baffle boards have a primary filter to collide with the sprayed paint mist.
・ The surface of the V -type baffle plate is specially processed to enhance collecting efficiency, and most of the paint mist is collected here due to the structure inside the baffle plate.
・ In the secondary filter, a small paint mist that did not adhere to the baffle board is filtered.
■ Features
・ All BBL -shaped electrical equipment has been used as a safety increase in explosion specification.
* However, the primary side wiring, cover switch, etc. (construction of dotted wires in the figure below) should be used by the customer.
■ Use
・ Paint mist scattering suppression
・ In places where drainage treatment and piping are difficult
* There are other model numbers.
-
Product
Maintenance improved baffle booth BBD-H series
-
Handling Company
ANEST IWATA Corporation
-
Categories
10 Models of Maintenance improved baffle booth BBD-H series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | All height | Body material | Ceiling height H | Collected efficiency Futalic acid -based acrylic paint | Collected efficiency acrylic urethane paint | Collected efficiency lacquer Priem paint | Collected efficiency melamine paint | Depth D | Exhaust fan air volume | Exhaust fan average wind speed | Exhaust fan motor format/specifications | Exhaust fan output | Exhaust fan type | Frontage w | Mass (kg) | Noise (device side) | Noise (whole device) | Primary power supply (three -phase 200V) breaker capacity (a) | Standard safety Increased explosion specification Switch motor Hands | Standard safety increase explosion specification for switch fluorescent lamp | Standard safety increase in explosion specification fluorescent lamp | Standard safety increase in explosion specification motor | Standard safety increase in explosion specification wiring |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BBD-15H-M5 |
Available upon quote | 2,475 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 120 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 0.75 | Axis flow φ600 | 1,500 | 299 | 69 | 76 | 20 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-20H-M5 |
Available upon quote | 2,475 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 160 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 1.5 | Axis flow φ600 | 2,000 | 340 | 75 | 82 | 30 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-25H-M5 |
Available upon quote | 2,475 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 195 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 1.5 | Axis flow φ600 | 2,500 | 364 | 75 | 82 | 30 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-30H-M5 |
Available upon quote | 2,545 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 235 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 2.2 | Axial flow φ800 | 3,000 | 502 | 71 | 79 | 40 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-35H-M5 |
Available upon quote | 2,545 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 275 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 2.2 | Axial flow φ800 | 3,500 | 528 | 75 | 84 | 40 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-40H-M5 |
Available upon quote | 2,545 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 315 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 3.7 | Axial flow φ800 | 4,000 | 593 | 75 | 84 | 60 | Power -resistant explosive press button | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-45H-M5 |
Available upon quote | 2,545 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 355 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 3.7 | Axial flow φ800 | 4,500 | 619 | 74 | 80 | 60 | - | - | - | - | - |
|
|
BBD-15H-M6 |
Available upon quote | 2,475 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 120 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 0.75 | Axis flow φ600 | 1,500 | 299 | 69 | 76 | 20 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-20H-M6 |
Available upon quote | 2,475 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 160 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 1.5 | Axis flow φ600 | 2,000 | 340 | 75 | 82 | 30 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
|
|
BBD-25H-M6 |
Available upon quote | 2,545 | Galvalium steel plate | 2,000 | 90 | 88 | 92 | 96 | 1,500 | 235 | 0.65 | Full closed fan -shaped 200V 4P IE3 | 2.2 | Axial flow φ800 | 3,000 | 502 | 71 | 79 | 40 | Power -resistant magnet switch | Power -resistant tan brass switch | The safety increase explosive mounting unit is the same as the V BBL form. | Safety increase explosive IE1 specification | Waterproof plica wiring |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of ANEST IWATA Corporation
View more products of ANEST IWATA Corporation
About Company Handling This Product
- Japan