Aluminum punching metal A1100 for architecture, buildings and furniture
Kyoei Uchi
About This Product
■ Overview
-The punching metal is a material made in a metal plate punching (punched) with a mold.
・ It is used for buildings and residential devices, taking advantage of various characteristics such as ventilation, ventilation, shading, light -shielding, sound insulation, sound absorption, and thermal radiation.
・ It has the beauty that can be accented as a design or blend into the city.
・ The diameter of the hole (hole diameter) is φ (pie or pie), and the length of the hole to the circularity of the next hole is represented by P (pitch). P continues in the longitudinal direction on a constant scale.
* The angle of the part is made at 60 degrees. It is called 60 degrees Chidori. The main stock is 60 degrees staggered. Standed scale ... H1,000XW2,000, H1,250XW2,500
・ The mold for producing punching metal differs depending on the plate thickness and the pole diameter pitch.
・ The end of the product changes with the mold used.
-The molds used in stock are not symmetrical as shown in the figure.
・ The jumping type will be different in one row.
■ What is alumite?
-Alumite refers to a method of coloring punching by electrolysis.
・ By performing anodized processing, the strength is increased and it is difficult to corrode.
・ Our alumite inventory is performed an alumite process after punching the fabric material 1100. Therefore, the cross section of the hole is also colored.
■ 3 types of fabric materials are in stock
・ 1100: Aluminum is 99%or more. It is an alumite guarantee material.
・ 1050: Aluminum with a purity of 99.5%or more.
・ 5052: Aluminum alloy. It is stronger than the above two types.
■ What is the hole rate?
-The percentage of plates that are punched through the punching process are represented by the hole rate, which accounts for the overall area of the hole (hole).
-The punching metal changes the hole rate depending on the size of the hole and the interval between the pitches.
・ The narrower the pitch between the pitch, the more holes are punched and the hole rate increases.
・ It is also possible to calculate the weight of the board at the hole rate, how much hole is open to the board.
・ Please refer to it for choosing by application and image.
-
-
Product
Aluminum punching metal A1100 for architecture, buildings and furniture