Plug-in-type digital instruction dissolved oxygen WIL-102-DO
Shinko Technos Co., Ltd.
♻️
Environment & Recycling Use
💊
Pharmaceutical & Medical Use
🧪
Chemical Industry Use
About This Product
It is a type of digital insoluated oxygen that is installed in the DIN rail in the control panel that supports various purposes such as top water, drainage, training equipment, and building equipment.
・ DIN rail mounting type
・ Various settings and calibration operations are possible via communication (RS-485)
・ 24 V power supply (by specified form name)
-
Product
Plug-in-type digital instruction dissolved oxygen WIL-102-DO
-
Handling Company
Shinko Technos Co., Ltd.
-
Categories
-
Usage Scenarios
Environment & Recycling Use / Pharmaceutical & Medical Use / Chemical Industry Use
2 Models of Plug-in-type digital instruction dissolved oxygen WIL-102-DO
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature | Conformity standard | Data update cycle | Instruction accuracy | Measurement range (rated scale) Dolut oxygen concentration | Measurement range (rated scale) Dolut oxygen saturation rate | Measurement range (rated scale) oxygen partial pressure | Measurement range (rated scale) temperature | Peripheral humidity | Protective structure | Self -diagnostic function | Serial communication | Serial communication and communication protocol | Serial communication cable length | Serial communication communication line | Serial communication communication method | Serial communication communication speed | Serial communication data bit/Parity | Serial communication error correction | Serial communication error detection | Serial communication format | Serial communication stop bit | Serial communication synchronous method | Time accuracy | Transmission output 1, 2-1 | Transmission output 1, 2-2 | Transmission output 1, 2-3 | input | power supply | structure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WIL-102-DO, EVT |
Available upon quote | 0 to 50 ℃ | ROHS command support | 5 seconds | Rely on the accuracy of the fluorescent dissolved oxygen detector | Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l | Scenery range: 0.0-200.0 %, decomposition ability: 0.1 % | Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa | Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃ | 35 ~ 85%RH (but not condensation) | Over-pressure category Ⅱ, pollution 2 (IEC61010-1) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. | Perform the following operations from the external computer.・ Read and configure values and set -dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen arbitration, temperature reading / function change, adjustment / user storage area reading and setting. | Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Half double communication | Select 9600, 19200, 38400 BPS by key operation | 8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation | Command resend |
・ Parity check, checksum (Shinko standard) ・ LRC (Modbus ASCII), CRC-16 (Modbus RTU) |
ASCII, binary | Select 1 bit and 2 bits by key operation | Toning synchronization | Within ± 1%for the set time | Converts the dissolved oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen pressure or MV for each data update cycle, and output it in current. | If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. | ・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: Transmit output 1 span or transmission output within ± 0.3%of span | Fluorescent molten oxygen detector | 100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC | ・ DIN rail mounting method ・ Case: flame -retardant resin color: Light gray panel: Membrane sheet |
|
|
WIL-102-DO1, EVT |
Available upon quote | 0 to 50 ℃ | ROHS command support | 5 seconds | Rely on the accuracy of the fluorescent dissolved oxygen detector | Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l | Scenery range: 0.0-200.0 %, decomposition ability: 0.1 % | Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa | Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃ | 35 ~ 85%RH (but not condensation) | Over-pressure category Ⅱ, pollution 2 (IEC61010-1) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
Perform the following operations from the external computer. ・ Read and set various set values ・ Dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen pressure, temperature, state reading ・ Change and adjust function ・ Reading and setting of user storage area |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Half double communication | Select 9600, 19200, 38400 BPS by key operation | 8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation | Command resend |
・ Parity check, checksum (Shinko standard) ・ LRC (Modbus ASCII), CRC-16 (Modbus RTU) |
ASCII, binary | Select 1 bit and 2 bits by key operation | Toning synchronization | Within ± 1%for the set time | Converts the dissolved oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen pressure or MV for each data update cycle, and output it in current. | If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. | ・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: Transmit output 1 span or transmission output within ± 0.3%of span | Fluorescent molten oxygen detector | 24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method ・ Case: flame -retardant resin color: Light gray ・ Panel: Membrane sheet |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan