All Categories
History
Response Rate
100.0%
Response Time
53.0hours
Product
Plug-in-type digital instruction ratio meter WIL-102-SEHandling Company
Shinko Technos Co., Ltd.Categories
Usage Scenarios
Pharmaceutical & Medical Use / Environment & Recycling Use / Chemical Industry UseClick on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Repetition | Linearness | Instruction accuracy | Adjustment of cell constant correction coefficient (span) | Temperature school regular | Serial communication | Serial communication cable length | Serial communication communication line | Serial communication communication method | Serial communication communication speed | Serial communication synchronous method | Serial communication format | Serial communication and communication protocol | Serial communication data bit/Parity | Serial communication stop bit | Serial communication error correction | Serial communication error detection | Self -diagnostic function | Temperature compensation element | Temperature compensation range | Ambient temperature | Peripheral humidity | power supply | structure | Protective structure | Conformity standard | External dimensions | mass | Contact output (Options: EVT) 1 | Contact output (Options: EVT) 2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WIL-102-SE, EVT |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer.・ Reading and setting of various set values, setting / ratio resistance, temperature, state reading / function change, adjustment / user preservation area reading and setting |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from among the following 2 ・ ERR output, FAIL output, hell resistance input, upper and lower only separate operation, temperature input, upper and lower operations separately. |
|
|
WIL-102-SE, TA |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from among the following 2 ・ ERR output, FAIL output, hell resistance input, upper and lower only separate operation, temperature input, upper and lower operations separately. |
|
|
WIL-102-SE, TA2 |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from among the following 2 ・ ERR output, FAIL output, hell resistance input, upper and lower only separate operation, temperature input, upper and lower operations separately. |
|
|
WIL-102-SE1, EVT |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from the following 2 |
|
|
WIL-102-SE1, TA |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from the following 2 |
|
|
WIL-102-SE1, TA2 |
Available upon quote |
Horse resistance: ± 0.5% of input span |
Horse resistance: ± 0.5% of input span |
Temperature input: ± 1 ℃ |
Adjustment range: 0.700 ~ 1.300 |
Calibration range: -10.0 ~ 10.0 ℃ |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
2 polar -type resistance sensor (temperature element PT100 or PT1000) |
0.0 to 100.0 ° C |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from among the following, no operation, lower resistance input lower limit, hell resistance input, lower limit operation, temperature input upper limit operation |
As a contact output, select by key operation from the following 2 |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
53.0hrs
![Analog insulation resistance meter (Megger) [3 ranges] PDM5219S-Sanwa Electric Meter Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3005915202409302.png)
![Insulation resistance meter (Megger) / Earth resistance meter (Earth tester) Analog insulation resistance meter (Megger) [3 ranges] PDM1529S-Sanwa Electric Meter Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3005915202409303.png)
