All Categories

History

T Bond AZM1000 Two-Part Curing Adhesive, Set of 2-AZM1000
T Bond AZM1000 Two-Part Curing Adhesive, Set of 2-Howa Co., Ltd.

T Bond AZM1000 Two-Part Curing Adhesive, Set of 2
Howa Co., Ltd.


About This Product

Fixes firmly to concrete surfaces. A recommended adhesive. The successor to AZM500, now available in a large-capacity version. Use it to install safety products used outdoors, such as delineators, reflectors, road studs, and curb studs. Please allow 2 to 3 days from the time of order.

■Applications

Bonding road studs (metal and resin) to concrete and asphalt

■Directions for Use

・Remove dust and dirt from the installation area. If it is wet, remove the moisture and allow it to dry thoroughly. ・Mix the base resin and hardener thoroughly at a ratio of 1:1 using a spatula or similar tool. Take care to avoid insufficient mixing. ・Apply the mixed adhesive to the installation area to a thickness of 2 mm to 3 mm, then press the road stud firmly into place. ・Do not move the road stud until the adhesive has cured. When installing on a sloped surface or similar, temporarily secure the road stud with packing tape or similar until the adhesive has cured so that it does not move.

■Precautions

・Dry the installation area thoroughly. Do not carry out installation in rainy weather. ・Wear protective gloves and protective eyewear while working. ・After mixing the base resin and hardener, complete the installation within the pot life (60 minutes at 10°C, 15 minutes at 30°C) . ・Poor mixing causes reduced adhesive performance. Mix the base resin and hardener thoroughly. ・Take care not to let the adhesive adhere to anything other than the bonding surface of the installation area. In particular, if adhesive gets on the reflective surface of a road stud, the road stud will lose its intended function, so work with great care. If adhesive does adhere, remove it completely with a rag or similar. ・Some road studs are made of materials that dissolve when wiped with thinner, so do not use thinner. ・At 5°C or below the curing time becomes extremely slow, so avoid installation under such conditions. ・Take care not to spill the product when taking it out of or putting it back into the container. If it is spilled, scatter sand or similar over it before disposing of it. ・Internal pressure may have built up, so take great care when opening the lid. ・In the event of a fire, use a carbon dioxide, foam, or dry powder extinguisher. ・Never use the product for any purpose other than its intended use. One set allows approximately 20 units to be installed. When using indoors, ventilate the area while working.

  • Product

    T Bond AZM1000 Two-Part Curing Adhesive, Set of 2

Share this product


230+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of T Bond AZM1000 Two-Part Curing Adhesive, Set of 2

Image Part Number Price (excluding tax) Liquid A Liquid B
T Bond AZM1000 Two-Part Curing Adhesive, Set of 2-Part Number-AZM1000

AZM1000

Available upon quote

Base resin / 1,000 g

Hardener / 1,000 g

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Glue Products

Other products of Howa Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Howa Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2026 Metoree