Difficult sculptures that are difficult by hand-carving can also be laser processor RSD-SUNMAX-LT6040 MPC15
Linky Dow Co., Ltd.
About This Product
■ What you can do with RSD-SUNMAX-LT6040
・ Laser sculpture
Processing the material and making the most of the three -dimensional effect due to the unevenness. Difficult sculptures are also possible by hand -carving
·Laser marking
Processing to express letters and patterns by shaving the material shall be shallow
・ Laser cutting
Processing that completely cuts the material, such as cutting and pulling out
■ Sculpture and marking materials
Wood, rubber (may not be processed other than rubber manufactured for laser processing), acrylic, leather, ABS resin, gold paint, stone, glass, glass, ceramic, glass epoxy, polycarbonate, cork, etc.
■ Materials that can be disconnected
Wood and rubber (may not be able to process other than rubber manufactured for laser processing), acrylic, leather, ABS resin, cork
■ Design creation with Lasercut
Enter processing mode, speed, output, etc. You can also divide the processed layer. The settings must be changed depending on the processed material, depth and demanding quality. The finish differs depending on the setting of the sculpture speed, laser output, and scanning interval settings.
-
Product
Difficult sculptures that are difficult by hand-carving can also be laser processor RSD-SUNMAX-LT6040 MPC15
-
Handling Company
Linky Dow Co., Ltd.
1 Models of Difficult sculptures that are difficult by hand-carving can also be laser processor RSD-SUNMAX-LT6040 MPC15
| Product Image | Part Number | Price (excluding tax) | Attached device | Connection with control PC | Control software | Cutting area (mm) width x depth | Cutting speed (mm/secret) | Humidity (%) | Imported file format | Laser format | Laser output | Laser tube life (time) | Maximum resolution (DPI) | Maximum size of material for back penetration (mm) | Memory installed (MB) | Minimal resolution (mm) | Outside dimensions (mm) width x depth x height | Packing wooden box outer dimension weight (width MMX depth x height x wood box) | Positioning accuracy (mm) | Power consumption (w) | Power factor (%) | Processing material storage available size (mm) width x depth x height | Processing table up and down | Rota drive system | Sculpture area (mm) width x depth | Sculpture speed (mm/secret) | Small molded character | Temperature (℃) | accessories | power supply | wavelength | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
RSD-SUNMAX-LT6040 MPC15 |
Available upon quote |
Table lifting device / honeycomb table Cutting table Water -cooled pump air compressor Exhaust windbreak / duct |
USB cable | Lasercut 5.5 R4 | 600 x 400 | 0.01 ~ 500 | 5 ~ 95 | BMP, PLT, DXF, AI, NC, JPEG, GIF, PNG, TIFF, TGA, PCX | Water -cooled CO2 laser tube | 40W ± 10% |
Sculpture about 3,000 to 5,000 Cutting about 1,000 to 2,000 (Average value) |
1,016 |
Width: 470 Length: Infinity long Thickness: when cutting 60 (honeycomb table) 30 (cutting table) Sculpture time 80 (sculpture table) |
128 | 0.01 | 1,000 x 790 x 450 | 1,360 x 910 x 640 x 120 kg | ≦ ± 0.05 | 260W | 76 | 700 x 500 x 100 | Manual | 2 phase stepping motor | 550 x 400 | 0.01 ~ 1,200 | 2mm in kanji, about 1mm square degree in alphanumeric characters | 1 to 45 |
Power cable / USB cable USB memory (control software, manual, etc.) Tools / tool boxes LasermarkingSystem |
AC100V ~ 110V | 10,600 [NM] | Body weight 65kg |
Customers who viewed this product also viewed
Other products of Linky Dow Co., Ltd.
View more products of Linky Dow Co., Ltd.
About Company Handling This Product
- Japan
- Since 1991
- 20 employees