Press machine -shaped positioning device Dai Hight Indicator
Wako Kosen Co., Ltd.

■ Mainly used as a positioning device for the press machine Because it is not a digital, it is a mechanical design, so you can display the numerical values ​​without a power supply without fear of numbers. In addition, when installing in a place far from the driven axis, there is also a special order (length selection) flexible shaft. There is also a joint for flexible shafts. Please use our Counter for various purposes. In addition to the molding device of the press machine, the servo motor (Servomotor), the brake motor (Brakemotor), the sending device, the underwear quantomer, the control motor, the back gauge (shirring) counter, the counter for darkness It is used for various purposes, such as the sending length counter, the grip coefficient counter, the plate thick display counter, etc. ■ Terminology ・ Dai Height: This is the distance from the top of the bed to the lower surface of the slide when the slide sets up the slide adjustment at a dead point at a dead point. ・ Shut Height: Remove the bolsta and set it to the upper limit at the slide under death point, the distance from the top of the bed to the lower surface of the slide. ・ Open Height: This is the distance from the lower surface of the slide to the upper bolsta when the slide sets up the slide adjustment at a top dead point. ■ Slide adjustment amount The slide adjustment at the time of molding is performed by connecting lot and slide adjustment screw (connecting screw), and this screw adjusts the slide position up and down. Set a range of motion of the mold height that can be attached by the amount of adjustment. ■ What is Dai Hight Indicator? "Die Hight Indicator" is used to adjust the die height, shut height, open height, and slide adjustment amount. When the mold is set, set the upper limit / lower limit by this machine. * There are other model numbers.