All Categories

History

Program controller PCB1-PCB1
Program controller PCB1-Shinko Technos Co., Ltd.

Program controller PCB1
Shinko Technos Co., Ltd.

Shinko Technos Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

53.0hours


About This Product

■Summary

This is a program controller that can be set to 10 patterns, 10 steps, and a maximum of 100 steps.

■Program capacity: 10 patterns, 10 steps each

Program capacity is 10 patterns each with 10 steps. By linking patterns, program control of up to 100 steps is possible.

■Large display improves visibility

・Large and easy-to-read PV display displays a wide measurement range. ・Character size 24 x 11mm (height x width)

■No power supply required, easy initial setup with tool cable

It improves the operability of initial settings and contributes to labor savings. If you use the separately sold tool cable (CMD-001), power to PCB1 is not required.

■Dustproof/splashproof structure

The front part has an IP66 structure that can be used even in harsh environments where it is exposed to dust and water.

  • Product

    Program controller PCB1

Share this product


50+ people viewing

Last viewed: 9 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Program controller PCB1

Image Part Number Price (excluding tax) Setting accuracy Setting resolution temperature Isolated power output (optional) Maximum load current Isolated power output (optional) Output voltage Isolated power output (optional) ripple voltage Time setting accuracy Time indication accuracy Standard accuracy DC current DC voltage Standard accuracy thermocouple Standard accuracy resistance thermometer Control output DC current Control output non-contact voltage (for SSR drive) Control output relay contact 1a Control output OUT2 (optional) DC current Control output OUT2 (optional) Non-contact voltage Control output OUT2 (optional) Relay contact 1a Cold junction compensation accuracy Input DC current Input DC voltage Input thermocouple Input resistance thermometer Input sampling period Transmission output (optional) response time Transmission output (optional) resolution Transmission output (optional) Output accuracy Transmission output (optional) output Event output EV1 to EV3 relay contact 1a Event input (optional) Closed circuit current Event input (optional) Determination of operation Event input (optional) Number of input points
Program controller PCB1-Part Number-PCB1

PCB1

Available upon quote

Based on standard accuracy and cold junction compensation accuracy

Thermocouple, RTD input without decimal point: 1°C (F) Thermocouple, RTD input with decimal point: 0.1°C (F) DC voltage, DC current input: 1

30mADC

24V±3VDC (at load current 30mADC)

Within 200mVDC (at load current 30mADC)

±0.1% of setting time

±10.1% of setting time

Within ±0.2% ±1 digit of each input span

Within ±0.2%±1 digit of each input span However, R, S input 0 to 200℃ (32 to 392F) is within 6℃ (12F)
B input 0 to 300℃ (0 to 572F) is outside the guaranteed accuracy range

Within ±0.1% ±1 digit of each input span

4-20mADC resolution 12,000 load resistance up to 550Ω

12VDC±15% max. 40mA (with short circuit protection)

Control capacity 3A25 VAC (resistive load) 1A250VAC (inductive load cosΦ=0.4) Electrical life 100,000 times
Minimum applicable load 10mA5VDC

4-20mADC resolution 12,000 load resistance up to 550Ω

12VDC±15% max. 40mA (with short circuit protection)

Control capacity 3 A 250 V AC (resistive load)
1A 250V AC (inductive load cos=0.4)
Electrical life 100,000 times
Minimum applicable load 10 mA 5 V DC

Within ±1℃ from 0 to 50℃

0~20mADC, 4~20mADC input impedance 50Ω Allowable input current 50mA or less

0~1VDC input impedance: 1ΩM or more Allowable input voltage: 5VDC or less Allowable signal source resistance: 2kΩ or less

K, J, R, S, B, E, T, N, PL-Ⅱ, C (W/Re5-26) External resistance 100Ω or less, however, B is 40Ω or less

Pt100, JPt1003 conductor type Allowable input conductor resistance: Resistance per wire 10Ω or less

125ms

400ms+input sampling period (0%→90%)

12,000

Within ±0.3% of transmission output span

4~20mADC (load resistance: max. 550Ω)

Control capacity 3A250VAC (resistive load) 1A250VAC (inductive load cosΦ=0.4) Electrical life 100,000 times Minimum applicable load 10mA5VDC

Approximately 16mA

Edge operation Determined by level operation when power is turned on

2 points

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Controllers Products

Other products of Shinko Technos Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Shinko Technos Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

53.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree