Program controller PCA1
Shinko Technos Co., Ltd.
About This Product
■Summary
A program controller that can set 16 patterns and 16 steps, a maximum of 256 steps.
■Program capacity 16 patterns 16 steps
- Program capacity is 16 patterns and 16 steps.
- By connecting patterns, program control of up to 256 steps is possible.
Improved visibility with 11 segment LCD display
■Adopts 11 segment LCD display
Setting characters are now easier to understand.
■The largest size in the industry.
PV display: 24.0 x 11.0mm (height x width). SV/MV/TIME display: 14.0 x 7.0mm (height x width)
■PV-linked display color switching
Equipped with a function that changes the PV display color from orange to green to red, from green to red when alarm is ON, from orange to red when alarm is ON, or by changing the PV display color depending on the deviation between PV and SV. In conjunction with the operation indicator light, you can easily check for abnormalities.
■Program capacity is 16 patterns and 16 steps.
By linking patterns, program control of up to 256 steps is possible.
■Console software contributes to labor savings
The console software (SWC-PCA101M) improves the operability of initial settings and contributes to labor savings. If you use the USB communication cable (CMB-001), there is no need to power the PCA1.
■“Visualize” data with monitor software
By using the monitor software (SWM-PCA101M), you can change item settings, data logging, monitoring, etc. on your computer.
■Serial communication function improved
In addition to our standard protocols, communication protocols support ModbusASCII and ModbusRTU. ModbusASCII and ModbusRTU support block read/write and can read/write multiple data at up to 100 points.
■Dustproof/splashproof structure
The front part has an IP66 structure that can be used even in harsh environments where it is exposed to dust and water.
-
Product
Program controller PCA1
-
Handling Company
Shinko Technos Co., Ltd.
-
Categories
1 Models of Program controller PCA1
| Product Image | Part Number | Price (excluding tax) | Cold junction compensation accuracy | Control output DC current | Control output non-contact voltage (for SSR drive) | Control output relay contact 1a1b | Event output EV1 to EV4 relay contact 1a | H (mm) | Input DC current | Input DC voltage | Input resistance thermometer | Input sampling period | Input thermocouple | Number of patterns | Number of steps | Program time range | Repeat count | Setting resolution Setting temperature | Setting resolution time | Standard accuracy measurement DC current DC voltage | Standard accuracy resistance thermometer | Standard accuracy thermocouple | Time indication accuracy | W (mm) | Weight value |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PCA1 |
Available upon quote | Within ±1℃ from 0 to 50℃ | 4-20mADC resolution 12,000 load resistance up to 600Ω | 12VDC±15% max. 40mA (with short circuit protection) | Control capacity 3A250VAC (resistive load) 1A250VAC (inductive load cosΦ=0.4) Electrical life 100,000 times | Control capacity 3A250VAC (resistive load) 1A250VAC (inductive load cosΦ=0.4) Electrical life 100,000 times Event output One side of EV3 and EV4 is a common terminal | 96 | 0~20mADC, 4~20mADC input impedance 50Ω Allowable input current 100mA or less | 0 to 10mVDC, -10 to 10mVDC, 0 to 50mVDC, 0 to 100mVDC, 0 to 1VDC Input impedance 1ΩM or more Allowable input voltage 5VDC or less Allowable signal source resistance 2kΩ or less (0 to 1VDC) | Pt100, JPt1003 conductor type allowable input conductor resistance resistance per wire 10Ω or less However, PT100-100.0 to 100.0 is 5Ω or less | 125ms | K, J, R, S, B, E, T, N, PL-Ⅱ, C (W/Re5-26) External resistance 100Ω or less However, for B input, external resistance 40Ω or less | 16 patterns (can be connected) | 256 (16 steps/pattern) | 0 to 99 hours 59 minutes/step or 0 to 99 minutes 59 seconds/step (If you set -----, fixed value control is performed with step SV) | 0 to 9,999 times (If set to 0, repeat operation will not occur) |
Thermocouple, RTD input without decimal point: 1°C (F) Thermocouple, RTD input with decimal point: 0.1℃ (F) For DC voltage and DC current input: 1 |
1 minute or 1 second | Within ±0.2% ±1 digit of each input span | Within ±0.1% ±1 digit of each input span | Within ±0.2% ±1 digit of each input span However, R and S inputs 0 to 200°C (32 to 392F) are within 6°C (12F) B inputs 0 to 300°C (0 to 572F) are outside the guaranteed accuracy range | ±0.1% of setting time | 96 | Thermocouple, RTD input without decimal point: ± (0 to 100) °C (F) Thermocouple, RTD input with decimal point: ± (0.0 to 100.0) °C (F) |
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan