Ultrasonic bolt axial force meter MC950 Desktop: 4ch
Dakota Japan Co., Ltd.
About This Product
■About the ultrasonic bolt axial force meter MC950
MC950 is a new generation ultrasonic bolt axial force meter developed with a completely different concept from conventional ultrasonic bolt axial force meters.
In addition to unparalleled overwhelming high resolution (axial force 0.001KN, elongation 0.01μm, time 0.01ns), it also supports bolt axial force measurement in the plastic region and dynamic axial force measurement. did. Dynamic axial force measurement measures not only one bolt but up to eight bolts at the same time. By using the optional torque sensor (TAU), you can measure axial force, torque, and angle during bolt tightening in real time. You can also get one. Furthermore, it is equipped with a wide range of input/output functions, and supports the import of data measured by external devices and the external output of the axial force measured by the MC950.
■Summary
MC950 is an innovative ultrasonic bolt axial force meter that can simultaneously measure the axial force, torque, and angle of up to 8 bolts (4 for the portable version). In addition to the high resolution of "axial force 0.001 KN, elongation 0.01 μm, time 0.01 nanosecond", it is also possible to continuously measure dynamic axial force over a certain period of time during bolt tightening processes and durability/vibration experiments.
It supports high-speed sampling of up to 4,000 points/second, and can be used for dynamic measurements in a variety of applications, from measurements of a few seconds to long-term measurements of over 10 hours.
The software uses the same MC911 software as USone, and the calibration data collected with USone can be used as is with MC950. In addition to the 8 channels of axial force measurement (4 channels in the portable version), external devices such as torque sensors and load cells can be used simultaneously on 8 channels (4 channels in the portable version).
Furthermore, it is equipped with a wide range of input/output functions such as analog output of axial force (0 to 10V) and stop signal to the nutrunner. MC950 is a new generation ultrasonic bolt axial force meter developed for the verification and analysis of all bolt tightening problems.
■Features
・Maximum sampling frequency of 4,000Hz (depends on number of measurement channels and measurement items)
・Axial force: 0.001KN, elongation: 0.00001mm (0.01μm), time: 0.01 nanoseconds ultra-high resolution
・Supports bolt axial force measurement not only in the elastic range but also in the plastic range
・Supports axial force measurement of bolts with a total length of 5 mm to approximately 1 m
-
Product
Ultrasonic bolt axial force meter MC950 Desktop: 4ch
-
Handling Company
Dakota Japan Co., Ltd.
-
Categories
1 Models of Ultrasonic bolt axial force meter MC950 Desktop: 4ch
| Product Image | Part Number | Price (excluding tax) | Detection | Frequency | Gain | Measurement mode | Measuring range | Pulse | Pulse voltage | Resolution |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
MC950 Desktop: 4ch |
Available upon quote | Peak, threshold | 1~14MHz (1,000~14,000KHz) | AGC (automatic sensitivity adjustment), manual | Pulse-echo method, transmission method | Bolt diameter M5 or more, total length 5mm~1,177mm (1.17m) | Square pulsar | 5, 40, 55, 75, 90V | Axial force 0.001KN, elongation 0.00001mm, propagation time 0.01ns |
Customers who viewed this product also viewed
Other products of Dakota Japan Co., Ltd.
View more products of Dakota Japan Co., Ltd.
About Company Handling This Product
- Japan