All Categories

History

Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test-MS-6086
Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test-FUKUDA CO., LTD.

Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test
FUKUDA CO., LTD.

💻 Electronics & Electrical Use

FUKUDA CO., LTD.'s Response Status

Response Rate

100.0%

Response Time

52.5hours


About This Product

■What is the airtight inspection device for small electronic components?

This equipment performs leak tests on small electronic components that require airtightness, such as crystal devices, ceramic resonators, optical devices, power semiconductors, CAN devices, laser diodes, MEMS devices, SAW filters, small relays, and capacitors. Leak testing of sealed products requires two types of inspection: gross leak test and fine leak test. We have a lineup of fully automatic machines that can perform the entire process on one machine, special machines (custom-made), and tabletop types that are convenient for sampling inspections. This is a leak test system for small electronic components that require airtightness, such as crystal devices, ceramic resonators, optical devices, power semiconductors, CAN devices, laser diodes, MEMS-related products, SAW filters, small relays, and capacitors. We have a lineup of fully automatic machines, dedicated machines, and tabletop types.

■Leak inspection of electronic components, optical devices, etc. Gross leak, fine leak test system

There are two types of leak testing for sealed products: gross leak testing and fine leak testing. The gross leak test uses a differential pressure air leak test, and the fine leak test uses a helium leak test (bombing method).

■Leak detection range and compatible models

The lineup includes the following three models depending on the leak detection range, covering the entire leak rate range from large leaks to 10-15Pa m3/s (He). The Bombing Gross Fine Leak Test System is designed primarily for small workpieces of 2.5 x 2.0 or smaller, and has a function to manage the leaving time after filling with helium gas.

■ Gross leak measurement principle

For gross leak testing of small electronic components, a workpiece such as an SMD is placed in a small capsule and pressurized, and the minute pressure drop that occurs as the pressure inside the capsule leaks into the workpiece is measured. In addition, large leaks that leak instantly into the workpiece are measured by releasing the air inside the capsule into a small tank at atmospheric pressure and measuring the resulting pressure difference.

  • Product

    Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test
  • Usage Scenarios

    Electronics & Electrical Use

Share this product


40+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test

Image Part Number Price (excluding tax) Power supply voltage/power consumption Pneumatic source Inspection target size (mm) Transportation External dimensions (mm) *Excluding signal tower Discrimination level (Pa・m3/s) Processing speed
Airtightness inspection equipment dedicated to small electronic components Gross leak test system MS-6086 series Differential pressure type air leak test-Part Number-MS-6086

MS-6086

Available upon quote

AC100V±10% single phase 50/60Hz・1.5kVA

Air pressure source: 0.5MPa or higher Please use clean, dry air that does not fluctuate.
Recommended conditions: Compressed air cleanliness class 1, 3, 1 according to JISB8392-1:2012

1.6×1.2~2.5×2.0

OK/NGBOX removal (special specifications allow pallet loading/unloading, stacking, etc.)

W1,020×D985×H1,450

Gross leak: 2×10^-7~Large leak (equivalent standard leak)

8ch 1.0s/piece

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Air Leak Testers Products

Other products of FUKUDA CO., LTD.

Reviews shown here are reviews of companies.


View more products of FUKUDA CO., LTD.

About Company Handling This Product

Response Rate

100.0%


Response Time

52.5hrs

Company Overview

Fukuda Co., Ltd. is a manufacturer of inspection equipment for industries such as automobiles, aircraft, elect...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree