1. Metoree
  2. Protective Materials & Equipment
  3. Silicone Gels
  4. Simple cut and pasted gel tape gelchip GC (Taica Corporation)


Simple cut and pasted gel tape gelchip GC-GC-1
Simple cut and pasted gel tape gelchip GC-Taica Corporation

Simple cut and pasted gel tape gelchip GC
Taica Corporation

About This Product

A shock absorption sheet with a single -sided adhesive material that can be cut simply and pasted. Using αGEL, which combines softness and mechanical strength, not only shock absorption but also has excellent vibration characteristics. ■ Features ・ With one -sided adhesive material, it is easy to cut and paste according to the used part. ・ You can choose the type according to the application, such as tape width and thickness. ・ It is effective for shock absorption and anti -vibration to places where there is no gap between insulator and gel bush sandwiched. ・ It can be used in the temperature range of -40 ° C to 100 ° C. ■ How to handle ・ Remove dirt such as dust attached to the air. ・ Peel off the peeling paper and press it uniformly. ・ Because the pressure -sensitive adhesive is used, apply the pressure sufficiently and make sure that the adhesion is firmly adhered. ・ The powder is applied to temporarily suppress the stickiness, but does not guarantee the effect.

  • Product

    Simple cut and pasted gel tape gelchip GC



*Please note that we may not be able to accommodate sample requests.

8 Models of Simple cut and pasted gel tape gelchip GC

Items marked with have different values ​​depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Hard needle entry (1/10mm) Heat (J/G/K) Insulation destruction intensity (KV/mm) Length (mm) Low in volume efficiency (Ω ・ cm) Pharmaceutical -resistant NAOH (5 %) Pharmaceutical -resistant acetone Pharmaceutical HCL (10 %) Pharmaceutical NACL (10 %) Pharmaceutical distilled water Pharmaceutical fuel oil Pharmaceutical methanol Pharmaceutical toluene Pharmacopolous lubricating oil Tensile intensity (MPA) Thermal conductivity (W/M/K) Thickness (mm) Used temperature range (℃) Width (mm) Young rate (KPA) exterior specific gravity specification stretch (%)
Simple cut and pasted gel tape gelchip GC-Part Number-GC-1

GC-1

Available upon quote 55 1.52 15.1 Ten 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 3 -40-200 Ten 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-2

GC-2

Available upon quote 55 1.52 15.1 Ten 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 Five -40-200 Ten 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-3

GC-3

Available upon quote 55 1.52 15.1 15 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 3 -40-200 15 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-4

GC-4

Available upon quote 55 1.52 15.1 15 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 Five -40-200 15 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-5

GC-5

Available upon quote 55 1.52 15.1 15 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 Ten -40-200 15 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-6

GC-6

Available upon quote 55 1.52 15.1 20 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 3 -40-200 20 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-7

GC-7

Available upon quote 55 1.52 15.1 20 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 Five -40-200 20 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710
Simple cut and pasted gel tape gelchip GC-Part Number-GC-8

GC-8

Available upon quote 55 1.52 15.1 20 4.0 × 10^14 ◯ × ◯ ◯ ◯ × ◯ × × 1.17 0.2 Ten -40-200 20 119.5 Translucent 1.05 One -sided powder+one -sided adhesive material 710

Click on the part number for more information about each product

Customers who viewed this product also viewed

Both softness and mechanical strength (θ gel)-Taica Corporation

Both softness and mechanical strength (θ gel)

Taica Corporation

Silicone Gels

4 models listed

Simple cut and pasted gel tape gelchip GT-Taica Corporation

Simple cut and pasted gel tape gelchip GT

Taica Corporation

Silicone Gels

6 models listed

Anti -vibration Insulator θ (theta) type both ends between the twist type (low load)-Taica Corporation

Anti -vibration Insulator θ (theta) type both ends between the twist type (low load)

Taica Corporation

Silicone Gels

3 models listed

Anti -vibration Insulator MN type Both ends with both ends (medium load)-Taica Corporation

Anti -vibration Insulator MN type Both ends with both ends (medium load)

Taica Corporation

Silicone Gels

4 models listed

Anti-vibration Insulator θ-TW (Theta TW) Type Both ends between ends (high load)-Taica Corporation

Anti-vibration Insulator θ-TW (Theta TW) Type Both ends between ends (high load)

Taica Corporation

Silicone Gels
Anti -vibration insulator BG type both ends both ends, spring composite type (low load)-Taica Corporation

Anti -vibration insulator BG type both ends both ends, spring composite type (low load)

Taica Corporation

Silicone Gels

2 models listed

Anti -vibration Insulator SF type Upper connected, lower plate type (low to medium load)-Taica Corporation

Anti -vibration Insulator SF type Upper connected, lower plate type (low to medium load)

Taica Corporation

Silicone Gels

3 models listed

Anti -vibration Insulator SF (rubber coating) Type upper twist, lower plate type (high load)-Taica Corporation

Anti -vibration Insulator SF (rubber coating) Type upper twist, lower plate type (high load)

Taica Corporation

Silicone Gels

2 models listed

Attached to the screws Available for anti -vibration Gel Bush Low load type-Taica Corporation

Attached to the screws Available for anti -vibration Gel Bush Low load type

Taica Corporation

Silicone Gels

2 models listed

Attached to the screws can be attached to a vibration anti -vibration Gel Bush medium load type-Taica Corporation

Attached to the screws can be attached to a vibration anti -vibration Gel Bush medium load type

Taica Corporation

Silicone Gels

2 models listed

Attached to the screws can be attached to the vibration anti -vibration Gel Bush ultra -low load type-Taica Corporation

Attached to the screws can be attached to the vibration anti -vibration Gel Bush ultra -low load type

Taica Corporation

Silicone Gels
Acrylic gel sheet for shock absorption, uretangel sheet, etc.-Aritosukai Co., Ltd.

Acrylic gel sheet for shock absorption, uretangel sheet, etc.

Aritosukai Co., Ltd.

Silicone Gels

Other products of Taica Corporation

Both softness and mechanical strength (θ gel)-Taica Corporation

Both softness and mechanical strength (θ gel)

Taica Corporation

Silicone Gels

4 models listed

Attached to the screws can be attached to a vibration anti -vibration Gel Bush medium load type-Taica Corporation

Attached to the screws can be attached to a vibration anti -vibration Gel Bush medium load type

Taica Corporation

Silicone Gels

2 models listed

Attached to the screws can be attached to the vibration anti -vibration Gel Bush ultra -low load type-Taica Corporation

Attached to the screws can be attached to the vibration anti -vibration Gel Bush ultra -low load type

Taica Corporation

Silicone Gels
Anti -vibration sheet type that can be installed simply by placing it under the object-Taica Corporation

Anti -vibration sheet type that can be installed simply by placing it under the object

Taica Corporation

Vibration Absorbing & Isolating Pads

4 models listed

Seat -shaped heat dissipation material standard type (gel type)-Taica Corporation

Seat -shaped heat dissipation material standard type (gel type)

Taica Corporation

Heat Dissipating Sheets

6 models listed

Seat -shaped heat dissipation material standard type (gel type & low oil bleed type)-Taica Corporation

Seat -shaped heat dissipation material standard type (gel type & low oil bleed type)

Taica Corporation

Heat Dissipating Sheets

6 models listed

Seat -shaped heat dissipation material standard type (3W/mk or more 5W/mk less than 5W/mk)-Taica Corporation

Seat -shaped heat dissipation material standard type (3W/mk or more 5W/mk less than 5W/mk)

Taica Corporation

Heat Dissipating Sheets

6 models listed

Seat -shaped heat dissipation material standard type (5W/mk or higher)-Taica Corporation

Seat -shaped heat dissipation material standard type (5W/mk or higher)

Taica Corporation

Heat Dissipating Sheets

5 models listed

Seat -shaped heat dissipation high electric insulation type-Taica Corporation

Seat -shaped heat dissipation high electric insulation type

Taica Corporation

Heat Dissipating Sheets

4 models listed

Seat -shaped heat dissipation material non -silicone type-Taica Corporation

Seat -shaped heat dissipation material non -silicone type

Taica Corporation

Heat Dissipating Sheets

5 models listed

Excellent heat dissipation performance liquid heat dissipation Pate type-Taica Corporation

Excellent heat dissipation performance liquid heat dissipation Pate type

Taica Corporation

Heat Dissipation Materials

4 models listed

Excellent heat dissipation performance liquid heat dissipation material 2 liquid stiffening type-Taica Corporation

Excellent heat dissipation performance liquid heat dissipation material 2 liquid stiffening type

Taica Corporation

Heat Dissipation Materials

7 models listed


View more products of Taica Corporation

About Company Handling This Product

Taica Corporation

  • Japan
  • 1,181 employees

Related search keywords

Silicone Gels
Silicone Gels　Taica Corporation
Taica Corporation

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree