Product
Low -temperature hot meltHandling Company
Sanyo Life MaterialItems marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Open time/set time | Packing | Software (R & B) | TN-CK40-H1147 | TN-CK40-H1147/C53 | TN-EM18WD-H1147-EX | TN-EM18WD-H1147-EX/C53 | Viscosity (CPS) |
---|---|---|---|---|---|---|---|---|---|---|
Low -temperature hot melt 301m2 |
Available upon quote | 25 seconds/2-3 seconds | 5kg (about 160) cardboard | 90 ± 7 ℃ |
HF reading/writing head Square type, height 40mm The inspection surface (yellow) can be placed in 5 types of directions. Resin, PBT-GF30-V0 Power supply and operation can only be made when connecting to Blident interface Connect only by M12 × 1 connector, Blident extension cable |
HF reading/writing head For bass line pology using tben-* Square type, height 40mm The inspection surface (yellow) can be placed in 5 types of directions. Resin, PBT-GF30-V0 No terminal resistance (separate end resistance is required) This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*. Up to 32 node/line or connection Supported terminal resistance is required (see accessories) In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power. Please make sure that the voltage drop on the line is within the regulations Sparrine: Up to 2m Maximum bus length: 50m By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for static applications and low -speed dynamic applications. In the continuous HF bus mode, the command is executed simultaneously with all reading/writing heads in the bust pology. The recorded data is saved in the ring bu |
- | - | 1,650 (150 ° C) 2,450 (140 ° C) | |
Low -temperature hot melt 707K |
Available upon quote | 20 seconds/3-5 seconds | 5kg (about 200 bottles) Danbo | 88 ± 5 ℃ | - | - |
HF reading/writing head For explosion -proof areas or extreme requirements (food industry, etc.) Cylinder type, M18x1 Stainless steel, 1.4404 (SUS316L) LCD polymer front cap High protection grade: IP69K Special double lip sealing Enhanced resistance to acidic and alkaline cleaning agents For the food industry Laser engraved with very little laser Power supply and operation can only be made when connecting to Blident interface Connect only by M12 × 1 connector, Blident extension cable ATEX, Category II3G, EX Zone 2 ATEX, Category II3D, EX Zone 22 |
HF reading/writing head For explosion-proof areas or extremely requirements (food industry, etc.) and for bath line porridge using TBEN-* Cylinder type, M18x1 Stainless steel, 1.4404 (SUS316L) LCD polymer front cap High protection grade: IP69K Special double lip sealing Enhanced resistance to acidic and alkaline cleaning agents For the food industry Laser engraved with very little laser No terminal resistance (separate end resistance is required) This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*. Up to 32 node/line or connection Supported terminal resistance is required (see accessories) In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power. Please make sure that the voltage drop on the line is within the regulations Sparrine: Up to 2m Maximum bus length: 50m By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for sta |
10,700 (130 ° C) |
Click on the part number for more information about each product