Hydraulic cutting machine-2 pillar -shaped pressing type 30ton cutting machine

Hydraulic cutting machine-4 pillar -shaped pressed 100ton cutting machine

Hydraulic cutting machine-Side frame -shaped type 100 ton cutting machine

Hydraulic cutting machine-4 pillar -shaped pressed 150ton cutting machine

Hydraulic cutting machine-Horizontal pressing type 30ton cutting machine

Hydraulic cutting machine-4 Pillar -shaped pressed 50ton hydraulic cutting machine

Hydraulic cutting machine-4 pillar -shaped pressed 50ton cutting machine

Hydraulic cutting machine
Holai

Holai's Response Status

Response Rate

100.0%

Response Time

53.1hours

About This Product

Feature
● A lineup of both types of sheaes that are cut off with a sharp blade, and the steep shell that can be sandwiched with a durable double -edge, and you can select the right place in the right place.
● Two pumps are driven by two axis motors, low -pressure and low speeds at low pressure during light loads, and automatically switching to high -pressure low -speed when loading, so they do a large work with a small motor.
● With clamps, pushers, dumping boxes, sending conveyor, emissioned conveyor, with roller, with slide table, with safety cover, hydraulic unit or separate type, etc.
● The pressing method is equipped with a screw adjustment mechanism, and the cutting blade and the receipt can be approached to the end. Even if the knife is repeatedly grinded, it can always be adjusted and adjusted to the best state.
● The simplest manual operation mono -bar switch will increase the knife if you raise it, lower it if you lower it, and stop at that position if you release your hand.
● At the time of heavy load, the speed is low due to high pressure, so the machine does not overdo it, and there is no need to worry about vibration and noise.
● Machine accumulated from the know -how obtained from many delivery results, achieving durable, long -lasting, easy -to -use, and sharp cutting.

Oppressive method
The processed blade of the sharp blade tip to cut the treatment on the base.
By approaching to the limit of the edge and the limit of the receipt, you can cut it to the end. Cutting the sharp blade is small and cut with small pressure.
Insertic roughly crisp, such as films, sheets, paper, leather, fabric, etc., plastic molding (block veil), plastic and rubber (block veil), tire, rubber belts, furniture, carpet, futon, blankets, etc. This is suitable for disconnection of waste wood, raglope, electric wires, etc. such as pallets, telephone poles, sleepers, architectural waste materials, and packaging waste materials.

Shiru system
Cut with the power to cut (upper) blades and fix (bottom) blades. Movable (upper) blades are inclined to the edge of the fixed (bottom) blade and cut them.
This type of metal gears such as drums, steel furniture, home appliances such as refrigerators and washing machines, seats such as seats, seats such as seats, and non -combustible large waste with many metals are suitable.

Model
There are 10 models for this product.

Product
Hydraulic cutting machine

Handling Company
Holai

Categories

Machining / Machine Tools

Shredders

Machining / Machine Tools

Hydraulic Cutters

1140+ people viewing

Last viewed: 11 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Hydraulic cutting machine

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Maximum pressure	Blade length x stroke	motor	Cylinder	Tank unit	Cutting operation	Other specifications and attached equipment	Mechanical dimensions	Mechanical weight
2 pillar -shaped pressing type 30ton cutting machine	Available upon quote	30ton (7ton)	700 x 450	Both axis motor, 6P / 3.7kw	Φ165 × ST450 × 1	Built -in type under the table (120L tank)	Manual operation (monolber)	-	W1350 x L800 x H2700	About 1600kg
2 Pillar -shaped pressed 50ton cutting machine	Available upon quote	50ton (7ton)	700 x 450	Both axis motor, 6P / 3.7kw	Φ180 × ST450 × 1	Built -in type under the table (120L tank)	Manual operation (monolber)	-	W1350 x L800 x H2700	Approximately 2300kg
4 pillar -shaped pressed 100ton cutting machine	Available upon quote	100 ton (14ton)	1200 x 600	Both axis motor, 6P / 11kw	Φ250 × ST600 × 1 bottle	Top back mounting formula (300L tank)	Manual operation (operation board with monolber)	-	W1820 × L1550 × H3000	Approximately 3500kg
Side frame -shaped type 100 ton cutting machine	Available upon quote	100 ton (15ton)	1500 x 800	Both axis motor, 6P / 11kw	Φ180 × ST870 × 2 bottles	Top back mounting formula (300L tank)	1 cycle automatic driving	With a supply side clamp (clamp power: 20ton φ0100XST870X2) Supplied side auxiliary table (1500xl000) With manual rise and off -expulsion and closing type safety door	W1820 × L1550 × H3000	Approximately 3500kg
4 pillar -shaped pressed 150ton cutting machine	Available upon quote	150 ton (21ton)	1600 x 800	Both axis motor, 6P / 15kW	Φ230 x ST800 x 2 bottles	Top back mounting formula (550L tank)	Manual operation (operation board with monolber)	With a free roller before and after the table	W2380 × L1800 × H3550	Approximately 6500kg
Horizontal pressing type 30ton cutting machine	Available upon quote	30ton (10ton)	500 × 200	Both axis motor, 4P / 5.5kw	Φ140 x ST200 x 1	Bottom built -in type (120L tank)	Rubber veil L individual cutting	Input rubber veil receiving bottom shirta (cutting dimension decide) With a lifter for rubber veil automatic introduction With discharged and powdered crushing belt conveyor	W1150 x L1750 x H1850	Approximately 1200kg (Only cutting machine)
4 Pillar -shaped pressed 50ton hydraulic cutting machine	Available upon quote	50ton (7ton)	1000 x 600	Both axis motor, 6P / 5.5kw	Φ180 × ST600 × 1 bottle	Top back mounting formula (200L tank)	Manual operation two -handed button type (separate installation type)	With both sides cover	W1370 × L1230 × H2850	Approximately 3000kg
4 pillar -shaped pressed 50ton cutting machine	Available upon quote	50ton (7ton)	1200 x 400	Both axis motor, 6P / 5.5kw	Φ180 x ST400 x 1	Separate type (250L tank)	Automatic driving (manual operation possible)	With a loading belt conveyor (W1100 x L2500) With treatment sensor for tip -to -end detection Conveyor connection & falling discharge table specification	W2030 x L3650 x H2840	Approximately 3200kg (Excluding conveyor)
4 pillars with slide table 50TO cutting machine	Available upon quote	50ton (20ton)	2400 x 800	One axis motor, 4P / 7.5kw	Φ140 x ST800 x 2 bottles	Separate type (200L tank)	Half -automatic driving (mandreael or hungry selection)	Electric rack & pinion drive type front and rear slide table With a scroll sensor automatic detection stop function Upper half cutting automatic & core pipe removal after removal of manual operation cutting method With air cylinder type front and rear exit door & table guard	W3200 × L5150 × H3570	Approximately 10000kg
4 pillar -shaped pressed 100ton cutting machine with supply and exhaust device	Available upon quote	100 ton (28ton)	1200 x 650	Both axis motor, 6P / 22kW	Φ250 × ST600 × 1 bottle	Separate type (550L tank)	Autonomous driving (with each device alone)	Supply chain Pusher (with hatch cover, W1000 x L3000) With a supply side clamp (cramp power 20 ton, φ100 x ST700X2) With material discharge belt conveyor (W900 x L2400)	-	-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

A wood crusher that fully demonstrates the performance of its engine.Tub grinder (wood crusher)

Maruma Technica Co., Ltd.

170+ people viewing

Last viewed: 3 hours ago

Response time: 10.13 hours

Shredders

4 models listed

2 -axis crusher with automatic foreign matter separation function NK type machine

Iihama Steelworks

570+ people viewing

Last viewed: 4 hours ago

Response time: 20.24 hours

Shredders

5 models listed

Crusher Crusher Roll Breaker RBT-1610

Maekawa Industries Co., Ltd.

70+ people viewing

Last viewed: 2 hours ago

Response time: 38.59 hours

Shredders

3 models listed

A self-propelled horizontal grinder (crusher/chipper) that achieves industry-leading crushing capacity, chip quality, and ease of maintenance.

Maruma Technica Co., Ltd.

260+ people viewing

Response time: 10.13 hours

Shredders

4 models listed

BO series

Holai

1100+ people viewing

Last viewed: 4 hours ago

Response time: 53.15 hours

Shredders

12 models listed

Crusher lions redder EVO

Iihama Steelworks

400+ people viewing

Last viewed: 4 hours ago

Response time: 20.24 hours

Shredders

Sand making machine bucket sand crusher

Furugaki Construction Co., Ltd.

90+ people viewing

Last viewed: 6 hours ago

Response time: 49.80 hours

Shredders

3 models listed

Small crusher PET bottle crusher for plastic crushing such as waste materials and PET bottles

Fujitex Co., Ltd.

5.0

320+ people viewing

Last viewed: 9 hours ago

Response time: 35.64 hours

Shredders

3 models listed

Crusher Crusher Roll Breaker RBT-1716

Maekawa Industries Co., Ltd.

40+ people viewing

Last viewed: 3 hours ago

Response time: 38.59 hours

Shredders

3 models listed

Electric wood crusher with high productivity, low noise, and low running cost Electric horizontal grinder (crusher/chipper)

Maruma Technica Co., Ltd.

140+ people viewing

Last viewed: 4 hours ago

Response time: 10.13 hours

Shredders

4 models listed

DB series

Holai

550+ people viewing

Last viewed: 10 hours ago

Response time: 53.15 hours

Shredders

Crusher recycling plant

Iihama Steelworks

270+ people viewing

Last viewed: 4 hours ago

Response time: 20.24 hours

Shredders

2 models listed

See More Shredders Products

Other products of Holai

Reviews shown here are reviews of companies.

BO series

Holai

1100+ people viewing

Last viewed: 4 hours ago

Response time: 53.15 hours

Shredders

12 models listed

DB series

Holai

550+ people viewing

Last viewed: 10 hours ago

Response time: 53.15 hours

Shredders

FG series

Holai

530+ people viewing

Last viewed: 2 hours ago

Response time: 53.15 hours

Shredders

3 models listed

KR series

Holai

460+ people viewing

Response time: 53.15 hours

Shredders

2 models listed

LC series

Holai

280+ people viewing

Last viewed: 22 minutes ago

Response time: 53.15 hours

Shredders

NS series

Holai

330+ people viewing

Last viewed: 16 minutes ago

Response time: 53.15 hours

Shredders

P series

Holai

1840+ people viewing

Last viewed: 22 minutes ago

Response time: 53.15 hours

Shredders

9 models listed

QS series

Holai

260+ people viewing

Last viewed: 9 hours ago

Response time: 53.15 hours

Shredders

SWK series

Holai

350+ people viewing

Last viewed: 2 hours ago

Response time: 53.15 hours

Shredders

TP series

Holai

480+ people viewing

Last viewed: 1 hour ago

Response time: 53.15 hours

Shredders

ZI / SR series

Holai

650+ people viewing

Last viewed: 35 minutes ago

Response time: 53.15 hours

Shredders

2 models listed

Z series

Holai

1450+ people viewing

Last viewed: 32 minutes ago

Response time: 53.15 hours

Shredders

6 models listed

View more products of Holai

About Company Handling This Product

Holai

Response Rate

100.0%

Response Time

53.1hrs

Company Overview

Horai, founded in 1949 and located in Osaka, Japan is a manufacturer of material processing and recycling equi...

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Hydraulic cutting machine Holai

Holai's Response Status

About This Product

10 Models of Hydraulic cutting machine

Customers who viewed this product also viewed

Other products of Holai

About Company Handling This Product

Related search keywords

Hydraulic cutting machine
Holai