With two actuator two motors and two tokuru transmissions, the optimal driving output is demonstrated
IS
About This Product
Ungressive transmission switching unit that can demonstrate the optimal drive output with two motors and two tokle transmissions
■ Overview
・ Transitioner unit
C-1 High thrust-compatible deceleration gear unit
C-2 Reduction Gear unit for high-speed movement
・ Motor
M-1 high thrust compatible motor
M-2 movement compatible motor
Consists of two deceleration machines. Switching C-1 deceleration gear and C-2 deceleration gear operates smoothly with no gears.
■ Motor standard operation
M-1 Motor: Operation or Stop
M-2 Motor: Operation
M-1 Motor: Operation
M-2 Motor: Stop or operation
* The deceleration and stop are reversed while the driving operation is reversed.
* The M-1 / M-2 motor can be driven alone.
Start with only M-2 motor (M-1 motor stop)
* The drive operation is driven by the M-2 motor and C-2 transmission.
* At the start of the start, it moves high -speed, and is driven by high thrust at the front of the screw axis.
■ Unauthorized transmission summary standard
M-1 High propulsion dynamic operation deceleration ratio 1/20 to 1/200
M-2 high-speed deceleration ratio 1/1, 1/5 etc.
·the purpose
1. Energy saving
2. New function
3. Outer shape
Four. cost
The configuration that is mainly based on the above is set, and the selection of the motor, driving form, etc. is set, and the best operation is obtained.
■ Operation Overview
Drive the M-2 moving motor and C-2 high-speed movement deceleration gear. Works quickly.
High-torque is generated with the M-1 high thrust motor and the C-1 high thrust deceleration gear, and drives powerfully.
・ This device can connect 1/59 and 1/5 deceleration to two motors and to control the output steplessly.
・ Two motors are performed alone and two deceleration hypers of the two motors.
・ It is high -speed when traveling, and high thrust drive can be performed in stepless operation during work.
・ Motor capacity, rotation speed, and deceleration ratio of two units can be changed depending on the settings.
・ From small to large, it can be created freely.
・ For the combination, if you can present the specifications, we will make optimal proposals.
・ Incorporating hydraulic pressure, including electrification of hydraulic pressure, can help improve the work environment by energy saving.
-
-
Product
With two actuator two motors and two tokuru transmissions, the optimal driving output is demonstrated