Kett Electric Laboratory Co. Ltd.'s Response Status
This product is registered by Kett Electric Laboratory Co. Ltd..
About This Product
The HM-540 is a high-frequency-capacity watermeter that can be measured simply by pressing it lightly without damaging the wood surface.
It takes a considerable amount of time for building materials to dry to the inside, but if you judge in a dry state only on the surface, various problems will occur, such as warping and crazy finish dimensions. In such a case, the HM-540, which can measure the moisture to the inside of the wood, is required. In addition, the measurement method of this device is very effective when you do not want to damage the surface, such as furniture or high -quality dried wood for musical instruments, or when you want to measure low water wood.
The HM-540 has a water level correction function, data preservation output function, statistical function, and auto hold functions, which are large, have a large backlight, and redesigned in the housing and switches based on ergonomics, in addition to the functions of the conventional HM-520. It has become.
■ Small, lightweight handy type
Put the water detection unit in the air and press it to the target to measure. All series of measurement operations can be done with one hand.
■ Hydration function
In accordance with the difference in specific gravity depending on the production area, if you want to make a correction, you can make corrections with the primary (AX+B) for the display value.
■ Measurement result hold function
･ Even if the screen is difficult to see, the measurement result can be maintained by pressing the hold key.
-Equipped with an auto hold function that can be fixed without pressing the key.
■ LCD screen with backlight
The screen size is larger than the conventional HM-520, and the newly installed backlight and contrast adjustment function make it easier to measure moisture in dark places.
■ Data storage, statistical calculation function
･ It is possible to save the measurement data up to 999 points and check the saved data on the water plan.
-The statistical calculation function can also calculate the maximum, minimum, average, and standard deviation of the specified measurement data.
-Save data can also be output to the measurement data to the PC using the optional data logger software "HDL/02".
■ Correction function
･ Thickness: 10-40mm
･ Level: 0.1-1.25 (up to 3 set values can be saved)
･ Moisture: Tilt (0-2.50), cutting (-9.9-9.9)
･ Temperature: Automatic (10-40 ° C), manual (-10-70 ° C)
-
-
Product
High frequency capacity type (20MHz) Woody water meter HM-540
Share this product
