Dried weight loss method (heat-drying / mass measurement method) Infrared water meter FD-660
Kett Electric Laboratory Co. Ltd.
About This Product
This instrument infrared water meter FD-660 is an infrared water meter with a heat-drying and mass measurement method that is extremely similar to the "dry weight loss method" of the public standard measurement method, which is the basis of water measurement.
■ User -friendly operating part with LED
By lighting the LED of the operation unit, it shows the operation that users can do, and informs the status of the instrument.
■ Environmentally friendly organic carbon heater
･ The organic carbon heater, which is a heat source, does not contain halogen compounds or metals that contain the environment.
-The life is about 7,000 hours, about 4 times that of the conventional infrared lamps.
･ In addition, in the wavelength range (2.5 to 3 μm), where water reacts to heat (2.5 to 3 μm), the infrared light is more than twice as much infrared rays compared to general halogen heaters mounted on other infrared water meters.
■ Two types of measurement modes are complete
In advance, two types of measurement modes, "Automatic stop mode" and "time stop mode", can be measured under the drying conditions that are suitable for the drying characteristics of the measurement samples.
■ Measurement conditions can be registered
･ Equipped with 5 measurement conditions storage numbers.
･ By registering the measurement conditions of various samples in this number, the measurement preparation can be performed more smoothly.
■ Equipped with data memory function
It has a data memory function that can be stored in a batch output of 50 measurement data.
■ High -performance electronic balance and auto -spare mechanism
The high -performance electronic balance that is installed can be calibrated using standard copper. However, even with a high -performance balance, drifting due to parts level temperature changes during measurement is inevitable. Therefore, like the conventional device, this instrument has a built -in "auto -tair mechanism" that can adjust zero points during measurement.
As a result, the effects of the balance drift are minimized even in long -term measurements, enabling reliable measurements.
■ Equipped with PRE HEAT (reserve heat mode)
If the temperature inside the measuring instrument is not constant after the power is turned on or the temperature inside the measuring instrument is not constant, there may be an error in the measurement, but the equipment is equipped with a preheat mode that can provide preliminary heating to resolve them.
■ 110 mm diameter stainless steel samples
Large samples can increase the number of samples, improving the sample representative, and can be expanded thinly, improving drying efficiency.
■ Can be connected to printers and PCs
By connecting a printer (optional) or a PC and the data logger software "FDL-02" (option), the dry state and the final measured value during the measurement can be displayed and displayed.
-
Product
Dried weight loss method (heat-drying / mass measurement method) Infrared water meter FD-660
-
Handling Company
Kett Electric Laboratory Co. Ltd.
-
Categories
1 Models of Dried weight loss method (heat-drying / mass measurement method) Infrared water meter FD-660
| Product Image | Part Number | Price (excluding tax) | Display method | External output | Heat source | Measurement method | Measurement range | Measuring mode | Minimum display digit | Repeatability (standard deviation) | Sample dish | Sample volume | Temperature setting range | accessories | mass | option | power supply | size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FD-660 |
$ 1,222.00〜 | LCD with backlight (96x40mm) | RS-232C interface | 280WX2 Organic carbon heater | Dried weight loss method (heat -drying / mass measurement method) | 0-100 % (wet base / solid) 0 to 500 % (dry racing) | Automatic stop mode, time stop mode (1 to 120 minutes) | Moisture / solid: 0.1 % or 0.01 % (switching) Mass: 0.005g | 5g or more sampling volume 0.1 % (according to the measurement conditions and standard samples specified by the Company) | Made of stainless steel (diameter 110mm, depth 11mm) | 1-80g / voluntary volume sampling method | 30-180 ° C (1 ° C interval) | Sample dishes x2, sample dishes, windshields, sampling plates, spoons, spares X2, aluminum sheets (10 pieces), power cord, instruction manual | 3.2kg | Printer "VZ-380", printer paper (10 volumes), aluminum sheet (500 sheets), sample crusher "TQ-100", deodorizing windshield case "FW-100", data management software "Data Logger FDL-02" | AC100-120V / AC220-240V (50 / 60Hz) | 222 (W) x 360 (D) x 196 (H) mm |
Customers who viewed this product also viewed
Other products of Kett Electric Laboratory Co. Ltd.
View more products of Kett Electric Laboratory Co. Ltd.
