Armin 928 / illuminance sensor (ET9-ILL)
I Tec
About This Product
The energy required for operation is self -sufficient.
Wireless illuminance sensor using "environmental power generation" technology
･ Wireless illuminance sensor that does not require battery replacement
･ It operates using the energy generated and stored by solar cells.
･ Measure "illuminance" at a certain cycle
･ The measured illuminance and "sensor -specific ID" will be transmitted wirelessly each time of measurement.
■ It can be easily installed. After that, maintenance -free
･ Because it is wireless, there is no wiring work, it can be easily installed.
･ Since the power required for transmission is generated by solar cells, there is no need to worry about the time of battery replacement, cost, and effort.
■ Wide communication area
･ By adopting a specific small power radio standard (920MHz band), the area of 150m or more is covered in outdoor outlook environments.
* In some cases, the original performance may not be demonstrated due to external factors.
■ It can be used in a wide range of scenes
･ Waterproof performance (in -house evaluation IPX6)
* Equivalent to IPX6: There is no harmful effect even if a postal from all directions
* Factory setting options
･ Weather resistance performance (adopted weather -resistant grade material)
It can also be used in strong wind and rain and sunshine outdoor environments
-
Product
Armin 928 / illuminance sensor (ET9-ILL)
-
Handling Company
I Tec
1 Models of Armin 928 / illuminance sensor (ET9-ILL)
| Product Image | Part Number | Price (excluding tax) | Deline content | Measurement cycle | Operating environment | Operation conditions in the dark * 12 minutes transmission | Temperature measurement range | Waterproof | Weatherability | Wireless | power supply | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ET9-ILL |
Available upon quote | Digital signal * Measured illuminance and sensor specific ID | Standards: 12 minutes (when full charge, 72 hours continuous operation in the dark) Options: optional (10 seconds or more, up to 65535 seconds, 1 second chopped) factory settings | Temperature: -20 ℃ ~+60 ℃ | Operate in the dark) 400LX environment 2 hours in the dark 72H) About 15 minutes in direct sunlight in fine weather for about 7 hours in an environment of 400LX | 0 to 510 LX resolution: 8bit (2 LX) ± 15 % 0 to 1020 LX decomposition Noh: 8bit (4 LX) ± 15 % (both range is measured at the same time) | IPX6 equivalent (according to in -house examinations) | Polycarbonate weather -resistant grade material | Protocol: ENOCEAN (EEP: A5-06-02) / Modification method: FSK / frequency: 928.35MHz data rate: 125kbps / transmission output: 1mw (EIRP) / Authentication standard: ARIB STD T-108 | Solar cell | 82mm (W) x 24mm (d) x 12mm (H) | Approximately 22g |
Customers who viewed this product also viewed
Other products of I Tec
View more products of I Tec
