Armin 928 / Aid pressure sensor (ET9-BAR)
I Tec
About This Product
The energy required for operation is self -sufficient.
Wireless atmospheric pressure sensor using "environmental power generation" technology
･ It is a wireless air pressure sensor that does not require battery replacement.
･ Works using the energy generated and stored by solar cells.
･ Measure "atmospheric pressure" at a certain period
･ The measured atmospheric pressure and "sensor -specific ID" will be wirelessly transmitted each time of measurement.
■ It can be easily installed. After that, maintenance -free
･ Because it is wireless, there is no wiring work, it can be easily installed.
･ Since the power required for transmission is generated by solar cells, there is no need to worry about the time of battery replacement, cost, and effort.
■ Wide communication area
･ By adopting a specific small power radio standard (920MHz band), an area of 150m or more is covered in an outdoor environment ( * The original performance may not be possible due to external factors).
■ It can be used in a wide range of scenes
･ Waterproof performance (equivalent to in -house evaluation IPX4)
* IPX4: There is no harmful effect even if splash from all directions (daily waterproof level)
･ Weather resistance performance (adopted weather -resistant grade material)
It can also be used in rain and wind and sunshine outdoor environments
-
Product
Armin 928 / Aid pressure sensor (ET9-BAR)
-
Handling Company
I Tec
1 Models of Armin 928 / Aid pressure sensor (ET9-BAR)
| Product Image | Part Number | Price (excluding tax) | Deline content | Measurement cycle | Measurement range | Operating environment | Operation conditions in the dark * Sending interval 60 minutes | Waterproof | Weatherability | Wireless | power supply | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ET9-bar |
Available upon quote | Digital signal * Measured atmospheric pressure and sensor perfect ID | Standard: 60 minutes interval (when full charge, 72 hours continuous in the dark) Options: Optional (10 seconds or more, up to 65535 seconds, 1 seconds chopped) factory settings | Attotive pressure: 500HPa to 1,150HPA ± 10hpa Resolution: 10bit (approx. 0.64hpa) | Temperature: -20 ° C to+60 ° C / Humidity: 0-90 % * No condensation | Operate in the dark) 400LX environment 2 hours in the dark 72H) About 15 minutes in direct sunlight in fine weather for about 7 hours in an environment of 400LX | IPX4 equivalent (according to in -house examinations) | Polycarbonate weather -resistant grade material | Protocol: ENOCEAN (EEP: A5-05-01) / Modification method: FSK / frequency: 928.35MHz data rate: 125kbps / transmission output: 1mw (EIRP) / Authentication standard: ARIB STD T-108 | Solar cell | 82mm (W) x 24mm (d) x 12mm (H) | Approximately 22g |
Other products of I Tec
View more products of I Tec
