Armin / Temperature Sensor (ETB-RHT (-WR))
I Tec
About This Product
The energy required for operation is self -sufficient
Wireless temperature and humidity sensor using "environmental power generation" technology
･ Wireless temperature and humidity sensor that does not require battery replacement
･ It operates using the energy generated and stored by solar cells.
･ Measure "temperature and humidity" at a certain period
･ The measured temperature and humidity and "sensor -specific ID" will be wirelessly transmitted each time of measurement.
■ It can be easily installed. After that, maintenance -free
･ Because it is wireless, there is no need for wiring work, it can be easily installed.
･ Since the power required for transmission is generated by solar cells, there is no need to worry about the time of battery replacement, cost, and effort.
■ Wide communication area
･ By adopting a specific small power radio standard (920MHz band), an area of 150m or more is covered in an outdoor environment ( * It may not be possible to demonstrate its original performance due to external factors).
■ It can be used in a wide range of scenes
･ Waterproof performance (equivalent to in -house evaluation IPX4)
* Equivalent to IPX4: There is no harmful impact even if splash from all directions (daily waterproof level)
* Factory setting options
･ Weather resistance performance (adopted weather -resistant grade material)
It can also be used in outdoor environments exposed to wind and rain
-
Product
Armin / Temperature Sensor (ETB-RHT (-WR))
-
Handling Company
I Tec
-
Categories
1 Models of Armin / Temperature Sensor (ETB-RHT (-WR))
| Product Image | Part Number | Price (excluding tax) | Deline content | Measurement accuracy | Measurement cycle | Measurement range | Operating environment | Operation conditions in the dark * 6 minutes transmission interval | Waterproof | Weatherability | Wireless | power supply | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ETB-RHT (-WR) |
Available upon quote | Digital signal * Measured temperature and humidity and sensor perfect ID | Temperature: ± 0.7 ° C (-20 ° C to 5 ° C) / ± 0.4 ° C (5 ° C to 60 ° C) Humidity: ± 3% (20% to 80% ＠ 25 ° C) / ± 6% (other humidity @ 25 ° C) | Standards: 6 minutes (when full charge, 72 hours continuous operation in the dark) Options: Optional (10 seconds or more, up to 65535 seconds, 1 seconds chopped) factory settings | Temperature: -20 ° C to+60 ° C solution: 10bit (about 0.08 ° C) Humidity: 0-100 % decomposition ability: 8bit (about 0.39 %) | Temperature: -20 ° C to+60 ° C / Humidity: 0-90 % * No condensation | Operating for 10 years or more with auxiliary batteries (calculated values) | None / Waterproof option equivalent to IPX4 (according to your own exam) | Polycarbonate weather -resistant grade material | Protocol: ENOCEAN (EEP: A5-04-03) / Modification method: FSK / frequency: 928.35MHz data rate: 125kbps / Output: 1mw (EIRP) / Authentication standard: ARIB STD T-108 | Solar cell + internal auxiliary battery | 101mm (W) x 24mm (d) x 16mm (H) with flange | Approximately 29g |
Customers who viewed this product also viewed
Other products of I Tec
View more products of I Tec
