2-phase stepping motor PKP/PK series
Oriental Motor Co., Ltd.
About This Product
■Summary
・High torque・Low vibration
・Mounting angle 13~90mm
・Geared type, with encoder, and with electromagnetic brake available
■High torque
A review of the motor winding design has made it possible to increase the current. Achieves increased torque from low speed range to high speed range.
■Energy saving/power saving
By lowering the operating current supplied to the motor, it is possible to achieve the same torque as conventional products while reducing power consumption and CO2 emissions. Power consumption/CO2 emissions: 56% reduction compared to conventional models (compared to our company)
■Low vibration
By reviewing the magnetic design, we have achieved even lower vibration than conventional products.
■Resource saving through downsizing
Torque has been significantly improved compared to conventional products. If you compare the same torque, you can downsize the motor by using the PKP series. Contributes to space saving and weight reduction of equipment. 44% reduction in external volume.
■Uses a small and thin connector
The PKP series, which uses a small and thin connector, has a lower protrusion on the connector (with some exceptions). In addition, the direction of pulling out the motor cable is now upward, increasing the degree of freedom in the direction in which the motor cable can be pulled out.
■With encoder
Available with encoder. By comparing the current position and the command position, you can check whether the motor is operating normally.
■Motor position information can be detected
It is possible to monitor the current position and detect positional deviation. For example, you can check whether the motor is operating normally by comparing the current position and the command position.
■Highly reproducible origin finding possible
Since the Z-phase signal is output at the excitation origin (stable point), it can be used as a substitute for an origin sensor (a sensor attached to the motor shaft that detects the origin within one revolution). It also makes it easier to use the Z-phase output signal and TIM output signal together, improving the reproducibility of home positioning.
*This is a signal output from the driver every time the motor output shaft rotates 7.2° (3.6° for high resolution type) from the origin.
■Voltage output type and line driver output type can be selected
Voltage output type and line driver output type are available. In addition, a cable convenient for wiring the encoder is available separately.
-
Product
2-phase stepping motor PKP/PK series
-
Handling Company
Oriental Motor Co., Ltd.
-
Categories
1 Models of 2-phase stepping motor PKP/PK series
| Product Image | Part Number | Price (excluding tax) | 2 phase/5 phase | Axial play | Basic step angle | Concentricity of mounting pilot to shaft | Connection cable type | Electromagnetic brake | Excitation maximum static torque | Heat resistance class | Inductance | Insulation resistance | Insulation voltage | Motor part mass | Mounting angle dimensions | Operating environment (operating) Ambient humidity | Operating environment (operating) Ambient temperature | Perpendicularity of mounting surface to shaft | Radial play | Rated current | Rotor moment of inertia J | Shaft runout | Shaft type | Static angle error | Type | Usage environment (during operation) Atmosphere | Voltage | Wire winding resistance | Wiring method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PK264JA |
$ 52.65〜 | 2 phase | 0.075mm Max. (Load 10N) [PK21□ has a load of 1N, PK22□ has a load of 2.5N] | 1.8° | 0.075T.I.R. (mm) | Lead wire specifications | None | 0.75 N・m | 130 (B) [Standard type with terminal box: UL/CSA standard certified to 105 (A). ] | 1.8 mH/phase | The value measured between the motor coil and case with a 500V DC megger at normal temperature and humidity is 100MΩ or more. |
No abnormality will be observed even if 50Hz or 60Hz, 1.0kV is applied for 1 minute between the motor coil and case at room temperature and humidity. (0.5kV for mounting angles of 42mm or less, 1.5kV for standard type with terminal box/PK29□D) |
0.6kg | 60mm | 85% or less (no condensation) | −10~+50℃ (no freezing) | 0.075T.I.R. (mm) | 0.025mm Max. (Load 5N) | 2 A/phase | 280×10-7 kg･m2 | 0.05T.I.R. (mm) | Single shaft | ±3 minutes (±0.05°), PK26□J, PK26□JD: ±2 minutes (±0.034°) | Standard |
Free from corrosive gas and dust. Avoid direct contact with water, oil, etc. (Standard type with terminal box: No corrosive gas. No direct contact with oil.) |
2.9V | 1.46 Ω/phase | Unipolar 6 lead wires |
Customers who viewed this product also viewed
Other products of Oriental Motor Co., Ltd.
View more products of Oriental Motor Co., Ltd.
About Company Handling This Product
- Japan