Expanding the low-pressure lineup to the PRAD series AL/BL governor unit
I・T・O Co., Ltd.
About This Product
The PRAD series is a unit type pilot type governor that can be used as either a district governor or a dedicated governor. This product was jointly developed with Tokyo Gas Co., Ltd. and won a technology award from the Japan Gas Association. There are two types: a venturi restriction type that emphasizes capacity and a fixed restriction type that emphasizes stability of outlet pressure. For H type, you can choose from 4 types of entrance/exit connections. Maintenance is made easier by integrating the shutoff valve and filter.
PRAD-AL/BL is a unit type pilot operated low pressure governor that can be used as either a district governor or a dedicated governor. The valve part of the main valve is designed to be easy to remove, and the shutoff valve and filter are integrated to make maintenance easier. For the horizontal type, the entrance/exit connection direction can be selected from four types.
■Excellent pressure regulating performance
Optimization of pilot line design (1) Minimization of internal volume, 2) Optimization of orifice shape, etc. has made it possible to achieve a higher level of response and stability.
■Excellent maintainability
Optimization of the overall design of the governor unit (1) Reducing the number of parts by adopting an axial flow type main valve and integrating the shutoff valve and filter; 2) A structure in which all major equipment can be accessed from the side of the unit), which allows for easy disassembly and inspection. I did.
-
Product
Expanding the low-pressure lineup to the PRAD series AL/BL governor unit
-
Handling Company
I・T・O Co., Ltd.
-
Categories
1 Models of Expanding the low-pressure lineup to the PRAD series AL/BL governor unit
| Product Image | Part Number | Price (excluding tax) | Inlet connection | Inlet pressure (MPa) | Manual return type shutoff valve (kPa) | Mass (kg) | Occlusion pressure (kPa) | Outlet connection | Outlet pressure (kPa) | Pressure regulating pipe connection | Safety valve (kPa) | Strainer mesh number |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PRAD-AL-V |
Available upon quote | JIS10K80A flange (FF) | 0.30~0.99 |
Main line operation District specification: 2.70±0.15, dedicated specification: 3.50±0.15 Subline operation 4.50±0.15 Return method Manual return (signal pull) |
Approximately 421 |
Mainline district specification: 2.50, exclusive specification: 2.70 Subline district specification: 2.30, exclusive specification: 2.50 |
JIS10K200A flange (FF) |
Main line 2.30±0.20 Subline 2.10±0.20 |
JIS10K50A flange (FF) |
Start of blowing 2.90±0.05 Dead end 2.75 or more |
400 mesh |
Customers who viewed this product also viewed
Other products of I・T・O Co., Ltd.
View more products of I・T・O Co., Ltd.
About Company Handling This Product
- Japan