Real -time seismic intensity meter S wave
J Corporation
About This Product
■ The S wave has been upgraded.
Measure the seismic intensity of the installation location in real time.
Do not miss the timing of the alarm.
You can set a seismic intensity to control the external crisis.
Shocking price
Easy installation on walls
Emergency evacuation due to warning seismic intensity
Control the crisis with a specified seismic intensity or higher
Integrated body and sensor are united
The warning seismic intensity can be set in two steps
Record up to 9 cases of earthquake and warning operation
Operation test of external crisis is possible from the main unit
Holiday / night warning can be stopped
Evacuation guidance announcement after the shaking subsides
5 -year lease fee per month from 7,000 yen
■ What is real -time seismometer?
The measured seismic intensity announced by the Japan Meteorological Agency measures the seismic intensity by calculation method according to the magnitude of the damage of Japanese houses. This measured seismic intensity is different from the real -time seismic intensity while shaking because it is measured after the shaking of the earthquake. Real -time seismometer is an earthquake gauge that inherits the calculation method of the Japan Meteorological Agency almost as it is, and measure the actually swaying seismic intensity in real time.
■ What is S wave?
The real -time seismic intensity "Burutt S Wave" is measured from the 3 -axis acceleration sensor in real time, and after exceeding the seismic intensity set in advance, you can control the alarm by controlling external devices such as LEDs and buzzer. It is a device aimed at reducing damage by issuing an alarm when the earthquake shaking exceeds a specific seismic intensity. It can be used as an emergency evacuation judgment, control of external devices, response to direct earthquakes, and misinformation measures for earthquake Early Warnings.
■ Burutt S wave feature / function
･ Integrated body
An integrated body part of the body that performs calculation, display, and external control and the seismic wave sensor part.
･ Shocking price
Provided at the industry for the first time, at a shocking price.
･ Significant cost of installation construction costs
In the conventional real -time seismometer, the seismic wavy sensor part was fixed on the floor or the ground, and the wiring from it to the main body was required, so a large amount of installation work was required, but the S wave is simply installed on the wall. The cost of installation has been shockedly reduced.
･ No need for running costs, usage fees, and contract updates
Except for electricity bills, no running costs, usage fees, contract renewal, etc. are required
･ Install the seismic intensity in the installation location in real time
Normal measurement seismometers are notified of alarms when they are shaking, as the maximum seismic intensity is measured after the shaking of the earthquake has subsided. The real -time seismic intensity "Burutt S Wave" always measures the seismic intensity of the installation location in real time, and the external device etc. are controlled as the moment when the seismic intensity is measured in advance is measured to inform you of the warning. Do not miss the timing of the alarm.
･ Detailed seismic intensity measurement is possible
Detailed seismic intensity up to 1 digit, such as seismic intensity 5.2 and 4.6, can be measured and displayed in real time.
･ Control external devices with warning seismic intensity
If the set of warning seismic intensity is continued only by the set number of seconds, external devices such as broadcasting equipment, patrolite, and electronic bulletin boards are controlled by contact output. Notice of LED and buzzer on the main unit.
･ The conditions for issuing an alarm can be set at two stages of seismic intensity.
It is possible to set the operation conditions for notifying the alarm at a different seismic intensity. It is also possible to set evacuation preparations with a seismic intensity of 4 or more, broadcast evacuation with a seismic intensity of 5 or more, or urgently stop external devices.
･ A warning cancellation seismic intensity is possible
Since the seismic intensity to cancel the alarm can be set, it is possible to broadcast an announcement until the shaking of the earthquake is completely settled, and an appropriate evacuation guidance announcement after the shaking is completely settled.
･ Record the maximum seismic intensity and the operation history of the main unit
You can record up to 9 maximum seismic intensity and the operation history of the main unit.
• Holidays and nights can stop alarm operation
If you use the sleep function, you can set it so that the external device does not work even if an earthquake that meets the warning operation conditions on holidays or at night. During sleep, the maximum seismic intensity history is recorded.
･ Disaster prevention training / test broadcast
Control tests for broadcasting equipment, patrolites, external devices, etc. and disaster prevention drills can be conducted
･ While shaking, continue to send "announcements to confirm your safety"
When the earthquake reaches, the shaking begins, gradually becoming intense, the maximum shaking, and then the shaking gradually subsides. Shaking time depends on the characteristics and scale of the earthquake, but it may continue to shake for more than 3 minutes. While shaking, securing safety is the most demand, not evacuation. Therefore, it is important to keep the "announcement to confirm your safety" while shaking, and the end of the broadcast even though the violent shaking continues, or the continuation of the shaking even though the shaking is already subsided, causing a new secondary disaster.
After that, when the shaking has subsided, you can change the broadcast content and broadcast an emergency response and evacuation guidance announcement. While shaking, of course, even after the shaking subsides, it is difficult to maintain normal judgment due to surprise, fear, and anxiety about large shaking, and may make a mistake in the next action. To do so, if the shaking has subsided, the secondary disaster can be reduced immediately by automatically broadcasting instructions and evacuation guidance announcements to ensure safety and indicating the next action.
･ When the shaking has subsided, broadcast "Announcement of emergency response and evacuation guidance"
If you use the real -time seismometer "Burutto S Wave", you can continue to broadcast the announcement to ensure safety while shaking, change the broadcast content when the shaking subsides, and broadcast an emergency response instruction and evacuation guidance announcement.
Announcement example
While shaking:
"Pay attention to falling objects from above and ensure your safety until the shaking subsides."
"Pay attention to falling objects from above and ensure your safety until the shaking subsides."
･ ･ ･ ･ ･ Repeat until the shaking stops
If the shaking subsides:
"The shaking has subsided. Be careful of the aftershocks, start urgently response and evacuate according to the situation."
"The shaking has subsided. Be careful of the aftershocks, start urgently response and evacuate according to the situation."
･ ･ ･ ･ ･ Repeat until any time
･ In cooperation with Earthquake Early Warning
If you link with the S wave and the receiving device of the Earthquake Early Warning, it will be possible to respond to direct earthquakes, eliminate misinformation, and ensure more secure safety. In addition, an emergency earthquake bulletin can predict the time when the shaking begins, but it is not possible to predict the time when the actual shaking stops. If it is linked to the real -time seismometer, the broadcast of safety will be terminated at the just timing of the actual shaking, and then it will be possible to automatically broadcast another appropriate broadcast such as the evacuation route guide.
･ Trusted Made in Japan
Real -time seismometer is important for trust. We are particular about MADE IN JAPAN's seismometer.
-
Product
Real -time seismic intensity meter S wave
-
Handling Company
J Corporation
-
Categories
1 Models of Real -time seismic intensity meter S wave
| Product Image | Part Number | Price (excluding tax) | A Warning LED | B warning LED | C Cancellation LED | Contact output | History display LED | LED erasing LED | Maximum contact capacity | Operating temperature | Record LED | Sampling frequency | Seismic intensity calculation | Seismic intensity calculation accuracy | Seismic intensity calculation cycle | Seismic intensity calculation range | Seismic intensity display panel | Setting seismic intensity LED | power consumption | power supply | sensor | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BS-ES4571J-2 |
$ 2,502.50〜 | red | red | Blue | Relay contact | red | Blue | DC24V 1000 MAAC100V 500MA | -5 ° C to 40 ℃ | yellow | 100Hz | Real -time seismic intensity for 1 second | 1 digit after decimal points | 100Hz | 0.0-7.9 | Display the seismic intensity currently being observed and display various statuses (2 digits 7 segments) | red | 1w or less | DC+9V | MEMS | 185 × 80 × 40 | 412g |
Customers who viewed this product also viewed
Other products of J Corporation
View more products of J Corporation
