Double effect of rust prevention coating and rust conversion quick -drying rust converter RS spray
E N do Corporation
About This Product
■ Features
・ A spray type that has little odor and easy to apply to the surface.
-The double effect of converting red rust into black rust with tannin components+rust prevention coating on the surface.
・ Since the surface film is dry in about 1 hour, it can be painted after applying a 2 -liquid safeser in about 1-2 hours after applying.
・ In the case of putty, you can apply a 2 -liquid safeser in the same way as the paint after about 2 to 3 hours. (Some putty may be poorly adhered.)
・ 1.5 to 3㎡ can be applied with one.
■ How to use
Wearing work clothes, gloves, and masks, as it will be difficult to fall off if one liquid is attached.
2 Remove the red rust floating before use with a gold brush or sand paper.
3 Remove dust and oil and dry.
Sprinkle 4 cans and stir. (If you use it for the first time, throw it away a little.)
5 about 20cm away and spray thinly.
6 When the color of the surface changes from dark to black, spray again thinly. The rust prevention effect is enhanced by applying twice. (If applied thickly, the rust prevention film on the surface will be soft, making it difficult to apply top coating.)
[When painting / putty processing]
7. When applying and putty processing, apply the surface with a non -woven polisher on the surface of the non -woven fabric, after drying about 2 to 3 hours after applying about 2 to 3 hours (4 to 6 hours after the temperature is low). Paint and putty processing from above. * When applying a paint after applying the rust converter to the building, try it once and check if there is any problem.
■ Notes
・ If the floating red rust remains, it will not be completely switched, so be sure to remove the floating rust.
・ Remove the oil on the surface.
・ Rust -proof coating film is formed in unrusted metals to suppress rust, but the surface treatment may not create a uniform rust prevention membrane.
・ Please spray with a can. There are many gases when it is side or upside.
・ After use, leave it up for about 1 minute and leave it, and after the liquid and gas are separated, the cans are turned upside down for about 2 seconds.
-
-
Product
Double effect of rust prevention coating and rust conversion quick -drying rust converter RS spray