A quick -drying rust converter RS ​​500ml brush type that can be applied to pinpoints with a double effect of rust prevention coating and rust conversion
E N do Corporation

■ Features ･ A type with few smells. ･ Double effect of converting red rust into black rust and forming a rust prevention coating on the surface with a homeroom ingredient. ･ Since the surface film is dry in about 1 hour, it can be painted after applying a 2 -liquid safeser in about 1-2 hours after applying. ･ In the case of putty, you can apply a 2 -liquid safeser in the same way as the paint after about 2 to 3 hours. (Some putty may be poorly adhered.) ･ Applied amount: 60-100ml/㎡, can be installed about 5 to 8㎡ for one bottle ■ How to use [Preparation / application] Wearing work clothes, gloves, and masks, as it will be difficult to fall off if one liquid is attached. 2 Remove the red rust floating before use with a gold brush or sand paper. 3 Remove dust and oil and dry. 4 Make the container standing upright, turn the cap slowly and remove it. 5 Apply thinly with brush. 6 If the color on the surface changes from deep to black, apply it again. The rust prevention effect is enhanced by applying twice. (If applied thickly, the rust prevention film on the surface will be soft, making it difficult to apply top coating.) 7 Wash the brush immediately. [When painting / putty processing] 8 When applying for painting and putty processing, apply the surface lightly with an abrasive of a non -woven fabric on the surface after drying about 2 to 3 hours (4 to 6 hours after the temperature is low), and be sure to add a primer safeser (plasaf). Paint and putty processing from above. * When applying a paint after applying the rust converter to the building, try it once and check if there is any problem. ■ Notes ･ If the floating red rust remains, it will not be completely switched, so be sure to remove the floating rust. ･ Remove the oil on the surface. ･ Rust -proof coating film is formed in unrusted metals to suppress rust, but the surface treatment may not create a uniform rust prevention membrane. ･ When opening the cap, open it with care so that the liquid does not spill, and after use, be sure to tighten the cap.