Automatic lubricating oil hydration device LE-320
HIRANUMA
About This Product
20 Equipped with a continuous automatic measurement system for lubricating oil for samples and an automatic reagent replacement function.
It is systematized by combining it with a water measurement device.
Lubricant, grease, paint, etc., which are difficult to measure directly into the cell, can be continuously and efficiently measured.
■ Characteristics
1. Automatic measurement
The polyaminee can be measured automatically and can efficiently measure moisture.
2. Heat temperature (room temperature to 200 ° C)
The heating temperature of the sample can be set arbitrarily from room temperature to 200 ° C.
3. Measurement condition file
There are 50 measurement conditions files, and you can register the optimal temperature for each sample.
4. The temperature rising can be set for each sample
You can set up to 3 steps for each sample.
5. Type container that is easy to handle
PTFE is used for packing, and there is no blank from the packing.
6. Equipped with automatic reagent replacement function
By setting the reagent replacement time by the number of measurements, the generated solution can be excreted and replaced automatically.
7. Combination with a PC type water measurement device is also possible
Combination with PC type AQ/AQV-2260 is also possible.
-
Product
Automatic lubricating oil hydration device LE-320
-
Handling Company
HIRANUMA
1 Models of Automatic lubricating oil hydration device LE-320
| Product Image | Part Number | Price (excluding tax) | Action after the measurement is completed | Carrier gas / flow rate | Glucent replacement | Harter / temperature control | Heat temperature setting range | Measurement end position setting | Number of sampling containers installed | Sample container | Size / weight | Timetable amount (volume) | Toluene distributed weight | Water vaporization method | desiccant | option | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LE-320 |
Available upon quote | End buzzer, power blocking (depending on the setting) | N2 gas, 30-300ml / minute (set possible) | Automatic replacement by setting the number of measurements | Band heater, PID control method | Room temperature ~ 200 ° C | Set the stoppin to the end position or when the container is not detected | 20 samples | Hard glass container, aluminum foil packing, ptfe lid | Sample changer: 350W × 510D × 390H (mm) Approximately 19kg valve BOX: 275W × 440D × 280H (mm) Approximately 9kg | Up to about 3 ml | Approximately 5ml (per measurement) | Indirect -friendly distillation method | Molecula Seaves | ・ Operation switch AE | AC100V ± 10%50 / 60Hz about 150va |
Other products of HIRANUMA
View more products of HIRANUMA
About Company Handling This Product
- Japan
- Since 1943
- 104 employees