Flow injection analyzer (FIA) Multi-item analyzer FIA-300M
Nittoseiko Analytech Co., Ltd
About This Product
■Measurement items
Ammonia nitrogen, nitrite nitrogen, nitrate nitrogen, phosphate phosphorus, phenols, fluorine compounds, cyanide compounds, chromium (VI)
FIA-300M is a device that uses the FIA-300 series Flow Injection Analysis (FIA) method. Measurements can be made using the FIA method as stipulated by JIS K0126 General Rules for Flow Analysis.
The FIA method is an analysis method in which a sample or reagent is introduced into the flow of the reagent or sample in a capillary tube, reaction operations are performed, and then the analytical components are detected and quantified using a detection section installed downstream. . Measurements are performed using a closed system that is less susceptible to external factors, allowing for highly accurate measurements. Additionally, since it prevents chemical substances from scattering, it is an environment-friendly and analyzer-friendly device.
This device uses FIA's method to automate the analysis methods for eight items stipulated in the Fifth Total Volume Regulation, environmental standards, wastewater standards, tap water quality standards, and sewage discharge standards.
Features
■High sensitivity analysis
・Pump with excellent liquid delivery stability
・Piping of constant length and constant temperature
・Since a stable baseline is obtained, small changes can be detected, and sufficient analytical sensitivity can be obtained with a small amount of sample.
■Versatility
The multi-item analyzer FIA-300M can measure many analysis items with one unit. (Reaction reagents and interference filters need to be replaced.)
■Suitable for the following customers
Since the frequency of analysis is low, a certain amount of samples are analyzed all at once. It is difficult to purchase a dedicated analyzer.
■Piping configuration
The simple piping configuration makes it easy to check the condition of the piping and to replace it easily.
■Small sample/small reagent
Compared to manual analysis, the amount of samples and reagents used for analysis can be significantly reduced. As a result, the amount of waste fluid generated after analysis can also be reduced.
■Automation
By connecting the auto sample changer ASC-F50L, you can automate the measurement of 50 to 150 samples. By selecting options, it is possible to handle samples with a large amount of suspended solids (SS) or samples with high concentrations.
-
Product
Flow injection analyzer (FIA) Multi-item analyzer FIA-300M
-
Handling Company
Nittoseiko Analytech Co., Ltd
-
Categories
1 Models of Flow injection analyzer (FIA) Multi-item analyzer FIA-300M
| Product Image | Part Number | Price (excluding tax) | Analysis item Ammonia nitrogen | Analysis item Chromium (VI) | Analysis item Fluorine compounds | Analysis item Nitrate nitrogen | Analysis item Nitrite nitrogen | Analysis item Phenols | Analysis item Phosphate phosphorus | Analysis item cyanide | Analysis method | External dimensions | Heating section | Liquid sending part | Mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FIA-300M |
Available upon quote |
Measurement wavelength: 660 nm Corresponding standard: JIS K 0102 42.2 Indophenol blue spectrophotometry |
Measurement wavelength: 540 nm Corresponding standard: JIS K 0102 65.2.1 Diphenylcarbazide spectrophotometry |
Measurement wavelength: 620 nm Corresponding standard: JIS K 0102 34.1 Lanthanum-Alizarin complexone spectrophotometry |
Measurement wavelength: 540nm Corresponding standard: JIS K 0102 43.2.3 Copper/cadmium column reduction - naphthylethylenediamine spectrophotometry |
Measurement wavelength: 540 nm Corresponding standard: JIS K 0102 43.1.1 Naphthylethylenediamine spectrophotometry |
Measurement wavelength: 510 nm Corresponding standard: JIS K 0102 28.1.2 4-aminoantipyrine spectrophotometry |
Measurement wavelength: 880nm Corresponding standard: JIS K 0102 46.1.1 Molybdenum blue absorption photometry |
Measurement wavelength: 636 nm Corresponding standard: JIS K 0102 38.3 4-pyridinecarboxylic acid-pyrazolone spectrophotometry |
Oxidative thermal decomposition - spectrophotometric method (total nitrogen, total phosphorus) Absorption photometry (other) |
Approx. 350 (W) × 500 (D) × 470 (H) mm AC100 V 50/60 Hz | Reactor method |
Double plunger pump Flow rate: 0.1~1.9 mL/min Pressure resistance: 2.94 MPa (30 kgf/cm2) Wetted parts: PTFE, ETFE, sapphire, ruby |
Approximately 22 kg |
Customers who viewed this product also viewed
Other products of Nittoseiko Analytech Co., Ltd
View more products of Nittoseiko Analytech Co., Ltd
