All Categories

History

Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H-AQF-5000H
Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H-Nittoseiko Analytech Co., Ltd

Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H
Nittoseiko Analytech Co., Ltd

Nittoseiko Analytech Co., Ltd's Response Status

Response Rate

100.0%

Response Time

64.4hours


About This Product

Simultaneous measurement of halogen and sulfur in samples using combustion ion chromatography is possible. Sample decomposition - In addition to automatic ion chromatography measurement, calibration curve solution preparation and absorption solution dilution are also automated. Features

■[NEW] Automatic dilution function of absorption liquid

After injecting the absorption liquid into the ion chromatograph, it is possible to automatically dilute the absorption liquid and remeasure it.

■[NEW] Assembly type absorption tube

Maintenance is easy because it is an assembly-type absorption pipe consisting of a gas blowing pipe and the absorption unit body.

■[NEW] Automatic preparation of calibration curve solution

Using the optional calibration syringe pump, you can prepare calibration curve solutions of different concentrations from one calibration solution by automatic dilution. Calibration curve creation can be done quickly and automatically.

■[NEW] Automatic switching of absorption liquid

Absorption can be performed by selecting either a solution containing a redox agent or pure water. Automatic switching is possible according to the measurement item.

■User-friendly software

You can now use a mode that allows you to smoothly set up routine analysis that repeats predetermined conditions, and a mode that allows you to change analysis conditions arbitrarily.

■Additional options built-in unit

The external liquid selector (ES-500) and combustion monitor (CM-500) are built into the absorption unit to save space. ※option

■Safe and reliable combustion

The boat containing the sample can be moved at low speed inside the reaction tube. It is easy to operate as it allows you to create and register optimal combustion conditions for various samples.

■Humidification combustion system

Halogens can be measured with high precision because thermal hydrolysis is performed using stable large amounts of humidification. The liquid volume can be adjusted to 3 levels, so it can accommodate a wide range of concentrations.

■Constant volume function

Using a liquid level sensor, the amount of absorbed liquid after combustion can be measured with high precision as it automatically adjusts the volume.

■Easy maintenance

The use of an open/close type electric furnace with a door placed in front of the combustion section makes it easy to install and remove the reaction tube for maintenance.

  • Product

    Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H

Share this product


160+ people viewing

Last viewed: 13 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H

Image Part Number Price (excluding tax) Power supply Electric furnace Sample amount Sample introduction method Weighing Measurement target Dimensions/mass Dispenser Output Gas used
Sample combustion device (pretreatment) Automatic sample combustion device AQF-5000H-Part Number-AQF-5000H

AQF-5000H

Available upon quote

HF-500: AC 100V, 50/60Hz 1100VA
GA-500: AC 100V, 50/60Hz 150VA

The electric furnace is divided into two parts and the temperature can be set individually. Maximum 1100℃

Liquid: 100 μL or less Solid: 150 mg or less
*Depends on the sample.

Automatic transport by sample boat (using auto boat controller)

Loop weighing method

Liquid, solid

HF-500: Approximately 320 (W) × 430 (D) × 500 (H) mm, approximately 25 kg
GA-500: Approximately 250 (W) × 430 (D) 500 (H) mm, approximately 22 kg

Syringe pump, 5 mL

Start signal for ion chromatography data processing (contact)

Argon: (99.98% purity or higher, 0.3±0.1 MPa)
Oxygen: (99.7% purity or higher, 0.3±0.1 MPa)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Elemental Analyzers Products

Other products of Nittoseiko Analytech Co., Ltd

Reviews shown here are reviews of companies.


View more products of Nittoseiko Analytech Co., Ltd

About Company Handling This Product

Response Rate

100.0%


Response Time

64.4hrs

Company Overview

Nittoseiko Analytech Co., Ltd, founded in April 1979 and based in Yamato, Kanagawa, is a manufacturer and supp...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree