All Categories

History

Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H-TS-5000H
Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H-Nittoseiko Analytech Co., Ltd

Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H
Nittoseiko Analytech Co., Ltd

Nittoseiko Analytech Co., Ltd's Response Status

Response Rate

100.0%

Response Time

64.4hours


About This Product

Sulfur oxides contained in automobile exhaust gas cause acid rain, which directly impacts the environment. Additionally, recycled products such as recycled oil can have a negative impact on daily life due to their odor, so it is necessary to reduce and manage sulfur compounds in petroleum products and organic solvents. The trace sulfur analyzer TS-5000H can quickly and fully automatically measure sulfur in these materials. ・Sulfur: Oxidative decomposition/ultraviolet fluorescence method JIS K 2240, K 2541-6, ASTM D5453, D6667, D7183, D7551, ISO 20846 ・Nitrogen: Oxidative decomposition/chemiluminescence method JIS K 2609, ASTM D4629, D5762, D6069, D7184 Features

■User-friendly PC software

We have newly prepared a simple mode and an advanced mode so that it can be used in a wide range of situations, from laboratory use to product quality control, and you can select it according to your purpose to further improve operability.

■Quick analysis using auto boat controller

Automatically introducing the sample boat into the electric furnace with appropriately programmed operations prevents incomplete combustion and enables rapid measurements. The optimal program varies depending on the sample, but new programs can be easily created using the teaching function.

■Automatic control of gas flow rate

Oxygen and argon gas are always controlled at a stable flow rate using settings from a computer. It is also possible to automatically shut off the gas at the end of measurement, reducing gas consumption.

■Reanalysis function

After measurement, the peak width can be adjusted as desired while viewing the chart. Waveform data can be easily optimized.

■Audit trail function

All operations are recorded as history. You can view the history in advanced mode.

■Schedule management function

It automates a series of operations, from turning on the heater to shutting off the gas. In addition, two different combustion temperature conditions were set in the schedule, and temperature increases and decreases were performed continuously, further advancing automation.

■Easy maintenance

A door is placed in front of the combustion section and a retractable electric furnace is used, making it easy to attach and detach the reaction tube and maintain it.

■Simultaneous measurement of sulfur and nitrogen

By connecting a nitrogen detector using the well-established chemiluminescence method, highly sensitive simultaneous measurement of sulfur and nitrogen is possible with a single sample injection.

  • Product

    Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H

Share this product


120+ people viewing

Last viewed: 20 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H

Image Part Number Price (excluding tax) Power supply Electric furnace Sample amount Measurement accuracy Sample volume (μL) Measurement accuracy Concentration (μg/mL) Measurement accuracy Notes Measurement accuracy RSD (%) n=5 Measurement time Measuring range Target sample Dimensions/mass Analysis method Gas used
Nitrogen/sulfur/halogen measuring device (element meter) Trace sulfur analyzer TS-5000H-Part Number-TS-5000H

TS-5000H

Available upon quote

HF-500: AC 100V, 50/60Hz 1100VA
SD-500: AC 100V, 50/60Hz 150VA

Open/close type, 2-division type (temperature of sample injection part and reaction part can be set separately)
Maximum temperature 1,100℃

Solid: 1~100 mg, Liquid: 1~100 μL

40~10

0.1~50

When measuring dibutyl disulfide/toluene standard solution

25~3

Approximately 3 minutes/1 case (Measurement time depends on sample amount and measurement conditions)

Two-stage switching (low concentration range, high concentration range)

Sulfur compounds in petroleum and coal chemicals

HF-500: Approx. 320 (W) × 430 (D) × 500 (H) mm, approximately 25 kg
SD-500: Approx. 220 (W) × 375 (D) × 500 (H) mm, approximately 21 kg

Oxidative decomposition - ultraviolet fluorescence method

Argon: purity 99.98% or more, 0.3±0.1 MPa
Oxygen: purity 99.7% or more, 0.3±0.1 MPa

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Elemental Analyzers Products

Other products of Nittoseiko Analytech Co., Ltd

Reviews shown here are reviews of companies.


View more products of Nittoseiko Analytech Co., Ltd

About Company Handling This Product

Response Rate

100.0%


Response Time

64.4hrs

Company Overview

Nittoseiko Analytech Co., Ltd, founded in April 1979 and based in Yamato, Kanagawa, is a manufacturer and supp...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree