Aluminum electrolytic capacitors board independent aluminum electrolytic capacitors special products
Aisetec

UW

Special product

105 ° C ultra -small product

1,500

-10 ~+105

◎

450

210-1,150

± 20 % (20 ° C, 120Hz)

0.02 cv (μA) or 5ma less than a small value (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

According to the standard product rating table (105 ° C, 120Hz)

When measuring at 105 ° C for 1,500 hours (ripple current platform of the prescribed) at 20 ° C, satisfaction of the following is satisfied at 20 ° C.

500 hours to 105 ° C. without applying the voltage at 205 ° C. When measuring after the voltage treatment (JIS C 5101-4 4.1 4.1), the following is a generic capacity change rate: Loss of the initial value of ± 15 % or less: 175 % or less of the initial standard value: Leakage current.

JIS C 5101-4

CU

Special product

105 ° C high ripple goods Yokonban

2,000

-25 ~+105

400-500

120-1,200

± 20 % (20 ° C, 120Hz)

0.02 cv (μA) or 5ma less than a small value (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

According to the standard product rating table (105 ° C, 120Hz)

2,000 hours at 105 ° C. When the rated voltage (the prescribed ripple current platform) is applied at 20 ° C, the following is satisfied at 20 ° C.

500 hours to 105 ° C. without applying the voltage at 205 ° C. When measuring after the voltage treatment (JIS C 5101-4 4.1 4.1), the following is a generic capacity change rate: Loss of the initial value of ± 15 % or less: 175 % or less of the initial standard value: Leakage current.

JIS C 5101-4

◯

ZR

Special product

105 ℃ high ripple product

3,000

-40 ~+105

◯

400, 450

150-680

± 20 % (20 ° C, 120Hz)

0.02 cv (μA) or 3ma less than (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

According to the standard product rating table (105 ° C, 120Hz)

3,000 hours at 105 ° C. When the rated voltage (the prescribed ripple current platform) is applied at 20 ° C., satisfaction capacity change ratio is satisfied: Loss of the initial value of ± 20 % or less: 200 % or less of the initial standard value:

500 hours to 105 ° C. without applying the voltage at 205 ° C. When measuring after the voltage treatment (JIS C 5101-4 4.1 4.1), the following is a generic capacity change rate: Loss of the initial value of ± 15 % or less: 175 % or less of the initial standard value: Leakage current.

JIS C 5101-4

◯

Zlr

Special product

105 ℃ high ripple product

3,000

-40 ~+105

◯

400, 450

68-680

± 20 % (20 ° C, 120Hz)

0.02 cv (μA) or 3ma less than (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

According to the standard product rating table (105 ° C, 120Hz)

3,000 hours at 105 ° C. When the rated voltage (the prescribed ripple current platform) is applied at 20 ° C., satisfaction capacity change ratio is satisfied: Loss of the initial value of ± 20 % or less: 200 % or less of the initial standard value:

500 hours to 105 ° C. without applying the voltage at 205 ° C. When measuring after the voltage treatment (JIS C 5101-4 4.1 4.1), the following is a generic capacity change rate: Loss of the initial value of ± 15 % or less: 175 % or less of the initial standard value: Leakage current.

JIS C 5101-4

◯

DH

Special product

Charging and discharge -compatible products

3,000

-25 ~+105

400, 450

82-680

± 20 % (20 ° C, 120Hz)

0.02 cv (μA) or 3ma less than (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

According to the standard product rating table (105 ° C, 120Hz)

3,000 hours at 105 ° C. When the rated voltage (the prescribed ripple current platform) is applied at 20 ° C., satisfaction capacity change ratio is satisfied: Loss of the initial value of ± 20 % or less: 200 % or less of the initial standard value:

500 hours to 105 ° C, and after leaving the rating without applying the rating, after the voltage treatment (JIS C 5101-4 4.1 4.1) at 20 ° C.

JIS C 5101-4

◎

Places of peripheral temperature 40 ° C, charging electric potential difference (ΔV) = 150V, charging and discharged frequency 6Hz, after applying the number of charging electricity, satisfaction of the following is a static capacity change rate of ± 20 % or less in the initial value of 200 % or less: Leakage of 200 % of the initial standard value: Learn below the initial standard value.

HW

Special product

Large -capacity small -caps for flashing, strobe

-

-20 ~+55

◎

330-450

320-3,800

-10- + 20 % (20 ° C, 120Hz)

C ≦ 3,000: 0.02 cv (μA) or 3ma less than small (20 ° C, 5 minutes) C> 3,000: 1 × C (μA) (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

EIAJ-RC2365, JIS C 5101-4

After applying rated voltage at room temperature, 5,000 times of charging and discharge with 1 Ω discharge with discharge of 5,000 times, then satisfied with the following, generating capacity change rates: Interlosal of a loss angle within ± 15 % of the initial value: 150 % or less of the initial standard value: 150 % or less of the initial standard value.

350-470

HS

Special product

Large -capacity product standard product for flashing, strobe

-

-20 ~+55

◯

330-450

300-3,100

-10- + 20 % (20 ° C, 120Hz)

C ≦ 3,000: 0.02 cv (μA) or 3ma (0 ° C, 5 minutes) C> 3,000: 1 × c (μA) (20 ° C, 5 minutes)

The value of the standard product rating table (20 ° C, 120Hz)

EIAJ-RC2365, JIS C 5101-4

After applying rated voltage at room temperature, 5,000 times of charging and discharge with 1 Ω discharge with discharge of 5,000 times, then satisfied with the following, generating capacity change rates: Interlosal of a loss angle within ± 15 % of the initial value: 150 % or less of the initial standard value: 150 % or less of the initial standard value.

350-470