All Categories
History
Price (excluding tax)
■ Overview "Alem Cobond 2200" is an epoxy adhesive that contains glass fibers and enhanced voting force. Excellent wear resistance and impact resistance, it is used for adhesion of ceramic and metal, especially insulating shoots, duct, centrifugal separation machine, and other corrosion lining. ■ Characteristics The "Alem Cobond 2200" has excellent wear resistance and impact resistance, and is suitable for glue of ceramic and metal, especially insulating shooting, duct, centrifugal separation machine, and other corroded lining. In addition to outstanding wear resistance, it is also excellent in drug resistance to acids, alkali, organic solvents, salt, etc. ■ How to use "Alem Cobond 2200" is a reddish brown color and a 2 -liquid mixture type. The base agent B and the curing agent A are mixed and applied in a ratio of 1: 1 in the weight ratio. After bonding, it is hardened by drying at room temperature for 24 to 48 hours or firing for 4 hours at 80 ° C. Products after curing can be machined.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Birthday conditions that change to the left
Condensed volatile ingredients (CVCM)
Density (G/CM^3)
Distributed coefficient
Distribution rate (1.0kHz)
Dumpy strength (kgf/cm^2)
Escape force (kgf/cm^2)
Hardness after burning hardening
Heat expansion coefficient (CTE) (IN/IN/℃ x 10^-6)
Heat resistance upper limit (℃)
Insulation (KV/mm)
Insulation power (VOLTS/MIL)
Line contraction (%)
Mixed viscosity (CP)
Mixing ratio of resin and curing agent (weight ratio)
Pot life (100g amount @ 25 ℃)
Pull strength (PSI)
Recommended firing conditions
Total quality loss (TML)
Volume-fitted resistance value (ohms^-cm)
capacity
chemical resistance
color
Schrin cage (shrink rate) (mm/mm or in/in)
Heat expansion rate (in/in/℃)
Dealing dialogue (per 1kHz)
Part Number
Aremkobond 2200Handling Company
Edec Co., Ltd.Categories
| Image | Price (excluding tax) | Birthday conditions that change to the left | Density (G/CM^3) | Distributed coefficient | Distribution rate (1.0kHz) | Dumpy strength (kgf/cm^2) | Escape force (kgf/cm^2) | Hardness after burning hardening | Heat expansion coefficient (CTE) (IN/IN/℃ x 10^-6) | Heat resistance upper limit (℃) | Insulation (KV/mm) | Insulation power (VOLTS/MIL) | Line contraction (%) | Mixed viscosity (CP) | Mixing ratio of resin and curing agent (weight ratio) | Pot life (100g amount @ 25 ℃) | Pull strength (PSI) | Recommended firing conditions | Schrin cage (shrink rate) (mm/mm or in/in) | Volume-fitted resistance value (ohms^-cm) | capacity | chemical resistance | color |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 79 ℃ x 4HRS. | 1.6 | 0.01 | 4.7 | 942 | 161.7 | 88 (Shore D hardness) | 34 | -55 ~ 204 | 18.11 | 460 | 0.9 | paste | 1: 1 | 42min | 2,300 | Room temperature x 24 ~ 48hrs. | 0.009 | 1.0 × 10^15 | 1 Pint (≒ 500ml), 1 quote (≒ 1L) | Good | Rust color |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
