All Categories
History
Price (excluding tax)
■ Overview The "Alem Cobond 526N" is a new type of heat -resistant epoxy adhesive, which has a high heat resistance limit of 300 ° C, and shows highly adhesive adhesion by adhesion such as ceramic electronic components (penetrating nozzle). ■ Characteristics "Alem Cobond 526N" can be used continuously at a heat resistant maximum of 300 ° C. "Alem Cobond 526N" has passed the ASTM E-595 outgast. This is especially important because the aerospace industry is nervous in the material that generates gas. ■ How to use The "Alem Cobond 526N" uses a curing agent A and bass resin B at a mixed volume ratio of 1: 1. It is well kneaded with a spatula and applied with a thick application thickness. After bonding, put it in the furnace and bake at 93 ° C for 2 hours at 93 ° C, 2 hours at 163 ° C.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Birthday conditions that change to the left
Condensed volatile ingredients (CVCM)
Density (G/CM^3)
Distributed coefficient
Distribution rate (1.0kHz)
Dumpy strength (kgf/cm^2)
Escape force (kgf/cm^2)
Hardness after burning hardening
Heat expansion coefficient (CTE) (IN/IN/℃ x 10^-6)
Heat resistance upper limit (℃)
Insulation (KV/mm)
Insulation power (VOLTS/MIL)
Line contraction (%)
Mixed viscosity (CP)
Mixing ratio of resin and curing agent (weight ratio)
Pot life (100g amount @ 25 ℃)
Pull strength (PSI)
Recommended firing conditions
Total quality loss (TML)
Volume-fitted resistance value (ohms^-cm)
capacity
chemical resistance
color
Schrin cage (shrink rate) (mm/mm or in/in)
Heat expansion rate (in/in/℃)
Dealing dialogue (per 1kHz)
Part Number
Aremkobond 526NHandling Company
Edec Co., Ltd.Categories
| Image | Price (excluding tax) | Birthday conditions that change to the left | Condensed volatile ingredients (CVCM) | Density (G/CM^3) | Distributed coefficient | Distribution rate (1.0kHz) | Dumpy strength (kgf/cm^2) | Escape force (kgf/cm^2) | Hardness after burning hardening | Heat expansion coefficient (CTE) (IN/IN/℃ x 10^-6) | Heat resistance upper limit (℃) | Insulation (KV/mm) | Insulation power (VOLTS/MIL) | Line contraction (%) | Mixed viscosity (CP) | Mixing ratio of resin and curing agent (weight ratio) | Pot life (100g amount @ 25 ℃) | Pull strength (PSI) | Recommended firing conditions | Schrin cage (shrink rate) (mm/mm or in/in) | Total quality loss (TML) | Volume-fitted resistance value (ohms^-cm) | capacity | chemical resistance | color |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 149 ℃ x 3 ~ 4hrs. | 0.00% (25 ℃) | 1.23 | 0.01 | 3.01 | 1,266 | 196.9 | 89 (Shore's D hardness) | 33 | -60 ~ 300 | 17.72 | 450 | 1 | 8,500 | 1: 1 | 150min | 2,800 | 93 ℃ x 2HRS. + 163 ℃ x 2HRS. | 0.254 or less | 0.49% (125 ° C) | 4.0 × 10^14 | 50ml cartridge x 3, 1 pint (≒ 500ml), 1 quote (≒ 1L) | Good | Dark brown |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
