Price (excluding tax)
Equipment built -in, small, low -cost type (plastic housing) The material of the case is a cheap non -contact temperature sensor of plastic housing. The process of straightening the necessary output for the normal non -contact temperature sensor has been omitted. Even if the output value corresponding to the measurement temperature is divided into a non -linear, it can be used sufficiently. Please be assured that an output characteristics table is available. Introduction example ・ Detection of abnormal temperature ・ Judgment or not contact after heating ・ Temperature monitoring of rotating kilns, etc.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Accuracy rating
Case material
Case structure
Current consumption current
Detection element
Emissivity
FOV special
Measurement range
Operating temperature limit
Optical system
Peripheral temperature drift
Response time
Wavelength range
mass
output
power supply
Part Number
SST-NSP1835Handling Company
SSS CorporationItems marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Accuracy rating | Case material | Case structure | Current consumption current | Detection element | Emissivity | FOV special | Measurement range | Operating temperature limit | Optical system | Peripheral temperature drift | Response time | Wavelength range | mass | output | power supply |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | Fs x ± 2 % | ABS resin (like nut) | Epoxy resin sealed | 2.2ma or less | Thermopil | ε = 0.97 | 14 ° (φ12@50mm) | -20-100/200/300 ℃ | -10-70 ° C | There is lens | 0.2 ° C/℃ less than ℃ | Within 10ms | 5.5-13.5 μm | Approximately 33g | DC1 ~ 5V (non -linear) | DC5V ± 10% |