All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
114.4hours
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Accessories
Control circuit power consumption
Mass
PWM frequency
Power supply voltage
Protection function: Sensor abnormality
Protection function: fuse protection
Protection function: motor restraint
Protection function: overcurrent
Protection function: overload
Protection function: power supply voltage drop
Signal input
Signal output
Soft start setting
Speed setting (rotation speed setting)
Storage environment
Usage environment
Part Number
TCP-S27AProduct
Motor driver TCP-S27A/TCP-S30Handling Company
TSUKASA ELECTRIC CO.,LTDCategories
| Image | Price (excluding tax) | Accessories | Control circuit power consumption | Mass | PWM frequency | Power supply voltage | Protection function: Sensor abnormality | Protection function: fuse protection | Protection function: motor restraint | Protection function: overcurrent | Protection function: overload | Protection function: power supply voltage drop | Signal input | Signal output | Soft start setting | Speed setting (rotation speed setting) | Storage environment | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Motor connection cable (50cm) x 1, power/control signal input/output cable (50cm) x 1 | 1W or less | Approx. 30g (body only) | Approximately 20.0KHz | 24V±10% | Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the start input "open" and turning the power back on. | Detects abnormal power supply current and shuts off the circuit F1 (5A chip fuse) | When the speed command value is 250rpm or more and the motor current is 0.5A (1A for TCP-S27A-609) or more, a stoppage of 2 seconds or more is detected and determined to be locked, the start input is "open", and the power is turned on again. Reset with | Detects abnormal power supply current and cuts off output (automatic recovery) | If a current exceeding the rated output current flows continuously, the output will be cut off (state maintained), reset by turning the start input "open" and turning the power back on. | Detects a drop in power supply voltage and cuts off the output (automatic recovery) | Start input, rotation direction switching input, brake selection input, speed switching input, external speed command input | Rotation synchronization signal output, alarm output | Can be set to a maximum of 1.67 seconds/1000 rpm with RV3 (operates at startup and when speed command increases (D1 flashes during operation)) | Driver internal settings: 2 systems RV1 and RV2 (switchable by speed switching input), external speed command input: 1 system | -10~60℃, 85%RH or less (no condensation) | Use in an atmosphere with thermal convection, 0~40℃, 85%RH or less (no condensation) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
