All Categories
This section provides an overview for signal generators as well as their applications and principles. Also, please take a look at the list of 50 signal generator manufacturers and their company rankings. Here are the top-ranked signal generator companies as of December, 2024: 1.Aaronia AG, 2.Vaunix Technology Corporation, 3.B&K Precision Corporation.
Table of Contents
A signal generator is a device that generates various signals in a test manner, including function generators.
Signal generators are designed based on digital technology to generate a variety of waveforms.
A signal generator is not necessarily limited to ideal waveforms; some types are capable of generating signals with distorted waveforms or with noise added to the waveform.
A signal generator is available in stand-alone models that can be operated by the device itself or by a PC or smartphone.
Signal generators are used for circuit design verification, analysis, and various experiments.
When used as test signals for products, it is necessary to always have standard signal generators available. It is also necessary to calibrate and adjust the output of the signal generators periodically by comparing it to the standard signal generators.
Signal generators generally produce dozens of waveforms, including square waves, rectangular waves, triangular waves, sawtooth waves, and sine waves.
In addition to ideal waveforms, distortions, and noise can be added to create conditions that are even closer to real-world waveforms, contributing to highly accurate design.
As mentioned above, signal generators are used to verify a designed circuit or system by simulating a virtual input signal, which is then input into the equipment to detect any defects. Based on the results, the circuit is reviewed again, and the design of the equipment is completed through a cycle of trial and error.
Generally, equipment is designed in units of circuit blocks. When conducting verification after the design of a single circuit block is completed, input signals are required, but at the initial stage of design, there is no circuit to connect to. Therefore, in such cases, verification is performed by generating the necessary signals from signal generators and inputting them into the completed circuit design.
Furthermore, when the design of each circuit block is completed, and the product is assembled, the signals generated by the signal generators are input and tested in the same way. In this process, we verify not only the ideal input signal but also the signal distortion and noise that may occur under the actual user's operating environment.
As described above, signal generators are used in a wide range of applications, from the early design stages to near completion of the design, and even during production testing.
There are various types of signal generators, but the following two are typical examples.
1. Function Generator
One of the most versatile signal generators is the function generator. Among signal generators, those that can generate arbitrary waveforms with a single signal generator have been developed with the development of digital technology.
Since function generators can simulate any signal, it is possible to debug and adjust the device under test by simulating it with pseudo-signals before field testing. Signal generators for generating radio frequency (RF) digitally modulated waveforms are also widely used for characterizing RF electronic components, along with spectrum analyzers and power meters.
2. Signal Generators for RF Digital Modulation Waveform Generation
Signal generators are also available for generating radio frequency (RF) digitally modulated waveforms for complex modulation waveforms such as 5G and Wi-Fi signals. It is called vector standard signal generators (digital standard signal generator), and this instrument has a built-in I/Q modulator.
Therefore, up-conversion to I/Q modulation schemes such as 1024QAM and QPSK is possible. Combined with an IQ baseband generator, this signal generator can emulate and output most signals within the information bandwidth supported by the communication system.
1. How to Use Signal Generators
Signal generators, along with voltmeters, ammeters, signal analyzers, and power meters, are central to the measurement of electronic circuits. Nowadays, instrument manufacturers provide measurement environments that can generate arbitrary signals for complex modulated digital systems by using them with dedicated software applications on PCs.
In addition to complex, state-of-the-art digital systems, kits for measuring instruments that can easily generate signals are also available for beginners in electronic and electrical circuits. Since these kits do not deal with the latest complex signals, they can be purchased at very reasonable prices through online retailers.
This signal generator kit can output basic sine, triangular, and pulse waveform signals, along with their operating frequencies, at any desired level, making it a very useful device for experimental verification of small electronic circuits, even for beginners in electronic and electrical circuits.
2. Signal Waveform Capture to Circuit Simulators
Recently, some vendors of measuring instruments have built an EDA environment that allows circuit simulation of actual signal waveforms, which is very useful for designers of RF, analog, and digital circuits.
For example, in the past, the effect of RF nonlinear behavior on the distortion of digitally modulated signal waveforms was usually evaluated by inputting the actual modulated waveforms or verified by IMD (intermodulation distortion) behavior and fed back to circuit design.
Now, however, it is possible to incorporate the actual modulation signal waveform itself into RF analog circuits and front-end modules on a circuit simulator and to study the characteristics of communication systems, such as EVM (modulation accuracy), from a circuit design perspective on a simulator.
*Including some distributors, etc.
Sort by Features
Sort by Area
Founded in 2003, Aaronia AG is a German manufacturer based in Strickscheid, specializing in measuring, tracking, and monitoring technology. Initially focusing on spectrum analyzers, including the first portable handheld model introduced in 2008, the company expanded its product line to include antennas, preamplifiers, signal generators, shielding materials, and related accessories. In 2013, Aaronia developed AARTOS, a drone detection system, most recently used in the security infrastructure of the 2022 G20 Summit in Bali, Indonesia. With real-time analysis software, Aaronia offers customized integration of hardware components for diverse applications. The company also provides GPS logger software to collect data from the antennas.
Vaunix Technology Corporation, founded in 2005, is an American manufacturer based in Newburyport, Massachusetts, producing radio frequency (RF) and microwave test equipment and communications products. Adhering to the International Traffic in Arms Regulations (ITAR), the company has developed wireless test products under the Lab Brick line, complemented by graphical user interface (GUI) software. This product line includes attenuator matrix solutions that also serve as wireless handover test systems, offering cost-effectiveness and simplicity for microwave test benches. The company extends technical support to cellular infrastructure, communication, and electronic networking companies. Its services cover radio equipment repair and testing and system integration.
Headquartered in Everett, Washington, Fluke is an American-born company operating since 1948. Fluke offers a variety of testing equipment including digital multimeters, thermal cameras, solar PV testing equipment, thermometers, oscilloscopes, leak detection devices, as well as testing-equipment related accessories. Fluke offers direct online sales.
Teledyne LeCroy was founded in 1964 and is headquartered in Chestnut Ridge, New York, with sales, service, and development subsidiaries in the US and throughout Europe and Asia. The company serves a wide variety of industries including semiconductor & computer, consumer electronics, automotive, and telecommunications. The company’s product categories include oscilloscopes, electronic test equipment, protocol analysis solutions such as SATA and USB devices, modular data acquisition devices, and sensors and calibrators. The company provides services such as SSD testing, automotive and device interoperability testing, and technology training.
B&K Precision Corporation, established in 1951 and headquartered in Yorba Linda, California, stands as a manufacturer and supplier of test and measurement instruments. Its offerings span various industries and applications, including power supplies and DC electronic loads for power testing, signal generators for signal creation, component testers for evaluating electronic components, oscilloscopes for signal waveform analysis, and spectrum analyzers for frequency spectrum measurement. These solutions provide more options for electronic system design and development across education, research, engineering, production, and maintenance sectors. The company holds ISO 9001:2015 certification for its quality management.
Madell Technology Corporation, founded in 2004 and headquartered in Ontario, California, USA, is a designer and a manufacturer of SMT equipment and tools. The company offers electronic test and measurement instruments, rework stations, and various laboratory equipment. It also specializes in power transformers, heating elements, solder iron tips, white LED ring lights, and replacement heat tubes, primarily serving the electronic manufacturing sectors. The company offers small quantity PCB assembling as well as technical resources, including dummy components and practice kits.
Incorporated in 1965, Analog Devices, Inc. designs, manufactures, tests, and markets integrated circuits (ICs), software, and subsystems that leverage analog, mixed-signal, and digital signal processing technologies. The company provides data converter products, power management and reference products for power conversion, driver monitoring, sequencing, and energy management applications in the automotive, communications, industrial, and high-end consumer markets. In addition, the company provides digital signal processing and system products for high-speed numeric calculations. It serves clients in the industrial, automotive, consumer, instrumentation, aerospace, and communications markets.
Spanawave is a manufacturer of radio frequency and microwave solutions for the Test and Measurement needs of Military, Aerospace, Telecom, Industrial, and Scientific Research organizations. The company was founded in 2002 and is based in Roseville, California, with manufacturing facilities in San Ramon, CA. Their products are: various of RF and IF, Assemblies, Transceivers, Test & Measurement Microwave Components, and Test Fixtures from DC to 26GHz. Spanawave also produces the whole line of: Giga-tronics Microwave Power Amplifiers, Power Meters, Sensors, and Network Measurement equipment after purchasing Giga-tronics' Test and Measurement product line.
Berkeley Nucleonics Corporation, San Rafael, CA, in 1963 is a manufacturer of Test, Measurement, Nuclear and Life Sciences instrumentation. The company's product portfolio includes Digital Delay Generators, RF & Microwave Signal Generators, and Nuclear Radiation Detectors and Isotope Identification. Their products are used in industries such as Food and Beverage Processing, Pharmaceutical and Biotechnology and Chemical and Petrochemical. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
Rohde and Shwarz, headquartered in Munich, Germany, is a technology business that creates, develops, and promotes innovative information and communication technology products for professionals. Customers all over the world rely on Rohde & Schwarz and its cutting-edge solutions in the test & measurement, secure communications, networks & cybersecurity, and broadcast & media areas. They were created in 1993 and have regional hubs in Asia and the United States.Rohde & Schwarz has invested heavily in emerging technologies such as artificial intelligence, the industrial internet of things (IIoT), 6G, cloud solutions, and quantum technology.
Founded in 1976 and headquartered in Austin, TX, National Instruments Corporation provides a software-centric platform and systems to engineers and scientists worldwide. NI’s software is used for automated test and measurement applications in manufacturing environment for configuring real-time testing application, sensor configuration and data logging of mixed signals, and monitoring ancillary rotating equipment. NI’s software also enables the mass coordination of connected devices, software deployments, and data communications throughout distributed systems. Recently, NI has begun to develop test systems and solutions for autonomous driving software and hardware validation.
Vitrek Corp, established in 1990 and based in Poway, California, USA, is a manufacturer and supplier of high voltage test and measurement equipment. The company's product range includes Non-Contact Measurement devices, MTI Instruments Accumeasure Capacitance Products, Portable Hand-Held Signal Simulators/Calibrators, and Semiconductor/Solar Metrology Systems. These products are designed for various testing and measurement tasks. They mainly serve the electronic, appliance, medical, aerospace, and semiconductor industries. The company's services include safety and electrical test equipment provisioning, solar and metrology system offerings, vibration/engine balancing system solutions, and high-speed data acquisition.
SMTmax, headquartered in California and established in 2009, is a manufacturer and supplier of SMT tools and equipment for both prototyping and production purposes. Its product offerings encompass pick and place machines, stencil printers, BGA stations, reflow ovens, station parts, and have expanded into the dental clinic and lab fields. The company also provides additional services such as circuit board production, electronic test and measurement instrument manufacturing, customized electronic hardware design, and software development, making them a comprehensive solution for various electronic and manufacturing needs.
Keysight Technologies, Inc. was founded in 1939 and headquartered in Santa Rosa, California. Keysight is a global developer and manufacturer of electronic design and test solutions to communications, networking, aerospace, defense, and government, automotive, energy, semiconductor, electronic, and education industries. Keysight’s communications solutions group solutions include electronic design automation software; radio frequency and microwave test solutions, hardware and virtual network test platforms and software applications, as well as optical laser source solutions. Keysight’s electronic industrial solutions group offers various design tools and verification tools. Keysight offers product support, technical support, and training and consulting services. It sells its products through direct sales force, distributors, resellers, and manufacturer's representatives.
Micro Lambda Wireless, Inc., established in 1990 and based in Fermont, California, is a supplier of YIG or synthetic yttrium iron garnets that have ferrimagnetic properties. The company's YIG products include oscillators, bandpass and band reject filters, frequency multipliers, and frequency synthesizers. They are used for selecting or tuning microwaves. Along with these standard products, the company also provide customization capabilities according to customer requirements. The company's clients include the industries of defense, aerospace, and commercial.
Hangzhou Crysound Electronics Co. Ltd. is an ISO 9001:2015-certified manufacturer of acoustical testing systems and equipment that was established in 1997 in Hangzhou, Zhejiang, China. The company offers noise and vibration analysis systems for analyzing noise or vibration of assets such as vehicles or machines, and electroacoustic analysis systems for measuring electroacoustic performance and parameters of hardware such as speakers or microphones. It also offers warranty and repair services for customers requiring additional support. The company’s products are commonly used by clients in the recording, broadcast, and aerospace industries.
NTi Audio AG, founded in 2000 as NTI AG, is a manufacturer headquartered in Schaan, Liechtenstein, specializing in test and measurement instruments for acoustics, audio, and vibration applications. The company’s product range encompasses acoustic cameras, digital audio solutions, FLEXUS FX100 audio analyzers, sound level meters, and measurement microphones. Other product offerings include handheld signal generator Minirator MR-PRO or MR2, vibration meters, and the PureSound software extension. These products find applications across diverse sectors, particularly serving as measurement solutions for audio-acoustic installation. Other applications include broadcasting studios and live sound, evacuation systems, industrial research and development, noise measurement and monitoring, and quality control.
SIGLENT Technologies America, Inc., is a Shenzhen, Guangdong, China-based designer and manufacturer of electronic test and measurement instruments established in 2002. The company offers digital & handheld oscilloscopes, RF & waveform generators, spectrum & vector network analyzers, digital multimeters, and DC electronic loads. These products are used for time domain analysis of RF systems, electromagnetic pre-compliance testing, and SMPS characterization techniques in the communication sector, government facilities, and electronic manufacturing. It has achieved the US UL certification and has additional establishments in Solon, Ohio, USA, and Europe.
ZETLAB Company, founded in 1992, is a Russian-based manufacturer of control and measuring systems used in metallurgy & mechanical engineering, metrological laboratories, and manufacturing enterprises including aviation, automotive, consumer, and food industries. Its portfolio includes sensors, measuring products, turnkey systems, and digital sensors. The ZETSENSOR line digital devices include digital inclinometers, strain gauges, and seismic, temperature & pressure sensors. The company supplies turnkey data measurement, measurement control, and test control systems for seismic & leak detection, and seismic impact control. The company's ANALIZ, TENZO, SEISMO, VIBRO, and ZETVIEW software enable spectral analysis, electrical parameters measurements, & generation, recording, and representation of signals.
Sinocera Piezotronics Inc., established in 2001 in Jiangsu, China, is a manufacturer and supplier specializing in piezoelectric ceramic materials, piezoelectric sensors and dynamic testing instruments. The company’s products include piezoelectric ceramics, ceramic actuators, and a range of sensors, instruments, and signal-processing equipment. The company can also produce according to customers’ requirements offering custom solutions to meet different needs. Their products serve diverse industries including civil engineering, construction, energy, petrochemicals, and more. The company holds ISO9001 certification, Rohs and CE certificates, serving clients across the globe including North and South America, Europe, Asia and the Middle East.
Simac Electronics, situated in Neukirchen-Vluyn, Germany, is a pan-European manufacturer and developer specializing in computer electronics and open-source hardware. The company offers a broad spectrum of products, including sensors, development boards, high-end PCs, industrial systems, and educational solutions. With a specialization on development, production, and service, it provides a comprehensive one-stop solution. Its product lineup also encompasses measuring devices, linker kit buzzers, cables, and voltage converters. Additionally, it markets special systems and electronic components under its "Joy-IT" brand.
NovAtel Inc., established in 1978 and headquartered in Calgary, Canada, is a manufacturer that provides solutions for assured autonomy and positioning on land, sea, and air. The company offers a wide range of products, including GNSS receivers, GNSS inertial navigation systems, GPS and GNSS antennas, and anti-jam antenna. It also offers GPS and GNSS correction services, ground reference, and combined Systems. Its product is designed for low power consumption and multi-frequency tracking. It has been certified for ISO 9001:2015 and ISO 14001:2015. It supplies products to the national aviation ground networks of the USA, Japan, Europe, China, and India.
Xi'an Aigtek Electronic Technology Co. Ltd., established in 2008, is a Chinese manufacturer based in Xi'an, Shaanxi, specializing in measuring instruments. With over 100 patents and software copyrights, the company offers preamplifiers, power amplifiers, and radio frequency (RF) power amplifiers. Its product range also includes signal generators, as well as current and voltage sources. Developed in collaboration with notable research institutions like Northwest Polytechnic University, these products find applications, among others, in signal amplification systems, material testing, and underwater acoustic testing systems.
Anritsu Corporation, established in 1931 and based in Atsugi, Japan, is a manufacturer of electronic measuring instruments, quality assurance systems, and Information and Telecommunication equipment and devices. Its test and measurement products include power meters, power sensors, and conformance test systems, while X-ray inspection systems, metal detectors, and checkweighers ensure food safety and security. Other products like instrumentation-grade adapters and optical sensing equipment are used in IT. The company’s stock was listed in the 2nd section of the Tokyo Stock Exchange in 1961, and in 1968, it was listed in the 1st section.
RIGOL, established in 1998, has its R&D headquarters in China and is a manufacturer of electronic test equipment with over 400 employees serving more than 60 countries and regions worldwide. The company's main products include digital and mixed-signal oscilloscopes, spectrum analyzers, RF signal generators, waveform generators, sensitive measurement products, and data acquisition systems. RIGOL's products are used for IoT, EMC pre-compliance solutions, spectrum monitoring, RF device characterization, and complex demodulation by commercial and industrial clients.
Shijiazhuang Suin Instruments Co., Ltd., located in Shijiazhuang, Hebei, China, and founded in 1996, is a manufacturer of test & measurement instruments, electrical products, and application software. Its product portfolio includes signal generators, spectrum analyzers, frequency counters, power quality analyzers, and programmable DC power supplies. These products cater to a wide range of applications within the test & measurement industry, such as electronic circuit analysis, telecommunications signal analysis, frequency measurement, power quality assessment, and precise control of DC power supplies.
Promax Test & Measurement SLU, founded in 1963 and based in Barcelona, Spain, is a manufacturer of telecommunication instrumentation and electronics equipment. The ISO 9001-certified company stocks products like digital modulators for broadcast, earth resistance meters, and optical fiber fusion splicers used to provide testing solutions for satellite, cable, and digital terrestrial television. It stocks over 200 products at its Barcelona facility, with 18 calibration centers and several service centers worldwide. It produces on-demand PCB circuit boards and electronic equipment and offers software development, training, and industrial design services.
SIGLENT Technologies was established in 2002 and is headquartered in Shenzhen, China, and specializes in the design, manufacturing, and supplying of electronic measurement instruments. The company develops oscilloscopes, waveform generators, spectrum analyzers, digital multimeters, and other essential testing equipment. These instruments have various applications and are used by engineers, researchers, educators, and technicians. Their clientele includes research institutions, educational institutions, electronics manufacturers, and service providers. The company also provides solutions to Automotive electronics usually for testing equipment and to Intelligent Manufacturing where it helps with EMI debugging and even IoT industries benefit with aid in the verification of devices.
NIHON DEMPA KOGYO CO., LTD., founded in 1948, is a Japanese manufacturer and supplier headquartered in Shibuya-ku, Tokyo, specializing in crystal-related products. The company’s product line includes crystal units and oscillators, synthetic quartz crystals, quartz crystal microbalance (QCM) sensors, and millimeter-wave converters. Additionally, the company provides frequency synthesizers, optical components, outgas analysis systems, signal generators, and ultrasound probe (transducers). These products cater to sectors like automotive, healthcare, household appliances, industrial equipment, and medical. Notably, its collaboration with the Japan Aerospace Exploration Agency (JAXA) resulted in the QCM Thermogravimetric Gas Analysis (QTGA) system for analyzing outgas emissions from organic materials in vacuum settings.
AnaPico, established in 2005 and based in Zurich, Switzerland, is a manufacturer of test and measurement instruments for radio frequency and microwave applications. The instruments manufactured by the company are used for both civil and governmental purposes. Established by two microwave engineers, the company is invested in research and development for the custom solutions that they provide as they operate a worldwide support network for their customers. All of AnaPico's products are manufactured and tested in Switzerland.
Trans-Tek, Inc., established in 1967, based in Ellington, Connecticut, is a manufacturer of linear and angular displacement and linear velocity transducers. The company’s main products are Linear Sensors, based on LVDT (Linear Variable Differential Transformer) technology. Services provided include finding the right position or velocity sensor to meet a customer’s demanding requirements, technical representatives to assist in problem solving, and various delivering needs. The company’s aim is to provide transducer products that measure to any tough sensing applications and delivery requirements.
TEKTRONIX, INC., founded in 1946, is a manufacturer of measurement solutions used in 3D sensing, EMI/ EMC testing, high-speed serial communication, material science engineering, and Wireless & RF testing. The products include oscilloscopes & probes, signal generators, margin testers, multimeters, and analyzers. The company's products are used in advanced research, aerospace & defense, automotive, power semiconductor, and medical industries. The Bracknell Berkshire company offers calibration, repair, asset management, package assembling, and testing services following NEMA, HAlT & HASS, environmental, and shock-vibration testing.
MECASONIC was founded in 1969 and is headquartered in Juvigny, France is a manufacturer of ultrasonic welding apparatuses. The company offers a diverse product portfolio including metal welding devices, hot plate welding, and integrating components. It also provides services like testing laboratories, after-sale services, and training materials. These products have applications in the assembly of exterior vehicle lights, welding of FFP2 and surgical masks, and rivet printed circuits without damaging them.
Proportion-Air, Inc., established in 1985, is a US manufacturer of electronic air pressure regulators and air flow control valves located in McCordsville, Indiana. The company produces various regulators, including flow controllers, pressure transducers, volume boosters, and safety regulators, that accept analog and digital signals. Additionally, they supply auxiliary accessories for their products. The company services several markets, such as industrial manufacturing, transportation, aerospace, pharmaceutical, and food processing. Product uses include water jet cutters, aircraft fuselage testing, and medical testing.
Averna Technologies is based in Montreal, Quebec, Canada, and is a manufacturer of automated test & quality assurance solutions including smart data management, RF signal testers, protocol solution, and platforms since 1999. The company offers vision & optical solutions, RF & MW test solutions, fiber-optics test & measurement, robotics & motion, as well as calibration platforms. These products are used in semiconductor manufacturing, telecom infrastructure, consumer electronics, life science, and aerospace & defense industries. The company also provides a range of solutions including smart manufacturing, prototyping & consulting services, precision assembly & production base on customers' requirement and specifications.
Eiden Co., Ltd., established in 1964 and based in Kawasaki, Japan, is a manufacturer of electronics, transmission equipment, and measuring equipment, mostly for factory production. The company's products are mainly generators and demodulators. These are sold for industries such as broadcasting and communications. The company has shifted from analog to digital technologies in producing satellite and terrestrial broadcasting products. These are used in fields of mobile communications, optical communications, and community antenna television.
Micronics is an ISO 9001-certified manufacturer of measurement systems, ultrasonic sensors, and flow meters that was established in Tokyo, Japan, in 1984. The company produces a broad range of measurement systems, parts, and components. These products include fixed flow meters, clamp-on flow meters, and portable flow meters. It also offers product testing, calibration, and troubleshooting services for customers requiring additional support. The company’s products are commonly used in water processing, energy management, and environmental protection operations.
Sanko Technologies Sdn Bhd, established in 2019 and headquartered in Batu Maung, Malaysia, is a manufacturer and supplier specializing in RF and wireless communication testing instruments and solutions, particularly for Bird. The company's product range includes a modular vector network analyzer, a USB vector network analyzer, a handheld signal generator, a vector signal analyzer, a vector signal generator, and more. These products cater to a diverse range of sectors, including telecommunications, industry, computers, semiconductors, and universities. The company has established a clientele that includes TE Connectivity, Syrma SGS, Rosenberger, Hermeus, and Andhra Electronics Limited.
C.Scope International Ltd is headquartered in Ashford, Kent, United Kingdom, and was founded in 1984 is a manufacturer and distributor of pipe and cable location and avoidance equipment. The company offers an extensive product catalog including a cable avoidance tool, a C.Scope professional carry bag, and a plastic pipe tracer. It also provides services in cable avoidance tool training, repair servicing, and technical support to its customers. These products find applications in general groundwork, building and highway construction as well as national utility providers of gas.
MARTIGNONI ELETTROTECNICA SRL was established in 1970 and is a manufacturer and supplier of corona treaters, antistatic systems, and electric transformers based in Vanzaghello, Milano, Italy. The company manufactures various products such as extruflex hp150, flammatore 3D, and charge generators. The products have been used in various application, including the installation of corona treater for extrusion coating lines and blown extrusion lines in factories. The company has participated in Labelexpo Europe 2023 with the company's own stand to present the products.
Rigol Technologies Co. Ltd., founded in 1998 and headquartered in Suzhou, China, is a general electronic measuring instrument designer, manufacturer, and supplier. The company's core products include oscilloscopes, waveform generators, and spectrum analyzers. It also produces RF signal generators, handheld multimeters, and electronic data acquisition instruments. These products are used in scientific and industrial laboratories for research, product testing, and design. The company's services include calibration, repair, and the supply of the Rigol-Care warranty extension program.
Aim and Thurlby Thandar Instruments, founded in 1989 and based in Huntingdon, UK, is a manufacturer of electronic test and measurement equipment and laboratory supplies. Its products include EMC analyzers, waveform amplifiers, pulse generators, multimeters, and DC power supplies. It also provides accessories related to the products, including power adaptors, cases, rack mounts, cables, and connectors. The company complies with the WEEE directive, and all its products are listed in Annex I of the RoHS directive. It sells its products worldwide through various distributors, and all the products are designed and manufactured at the Huntingdon facility.
Supmea Automation Co. Ltd., founded in 2006 and based in Zhejiang, China, is a manufacturer and supplier of industrial process automation sensors and instruments. Its products include analysis instruments, recorders, pressure transmitters, flowmeters, and other field instruments, serving industries across over 100 countries. Its products are ISO 9001-compliant, and in 2022, its Supmea ULS-B Split Type Ultrasonic Level Transmitter received the Editor's Choice Award at the Control Engineering China Product Awards.
Pico Technology was established in 1991 and is headquartered in St Neots, Cambridgeshire, United Kingdom where it designs, manufactures, and supplies PC-based test and measurement instruments. The company deals in data acquisition, oscilloscopes, and automotive diagnostics with various test and measurement instruments, including oscilloscopes, data loggers, spectrum analyzers, signal generators, and automotive diagnostics tools. The products help engineers, scientists, researchers, and technicians capture, analyze, and interpret signals and data in various applications. The company also collaborates with academic and research organizations besides aerospace, telecommunications, electronics, and manufacturing industries.
Gao Tek Inc., started in 2001, and headquartered in Manhattan, New York, is a supplier of test and measurement equipment like embedded development tools, electronic measurement instruments, and telecommunication testers. The company is a B2B tech supplier that also stocks drone products, commercial gas detectors, and transceivers and is incorporated in the USA and Canada. It provides a one-year product warranty against defective material or workmanship and offers overnight delivery in the continental USA and Canada. It is a member of the GAO group and has served customers in over 50 countries worldwide.
Raditeq B.V., founded in the Netherlands in 1992, is a supplier of EMC/RF Test and Measurement Products. The company's product portfolio includes a diverse array of instruments, including spectrum analyzers, signal generators, EMC analyzers, RF amplifiers, and more. It also offers expert guidance, product consultation, and technical and customer support. The company serves markets such as telecommunications for supporting efficient network testing, spectrum analysis, and protocol validation for telecom equipment and networks, and electronics for enabling R&D, quality control, and manufacturing processes with precise EMC and RF testing capabilities.
Tabor Electronics Ltd., founded in Nesher, in 1971 is a supplier of test and measurement equipment. The company's product portfolio includes Waveform Generators, Signal Generators, Pulse Generators, Arbitrary Waveforms Generators, and Pulse Waveforms Generators. Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices, and Aerospace and Defense. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Analog Devices, Inc. |
5.1%
|
| 2 | Proportion-Air, Inc. |
4.6%
|
| 3 | Aaronia AG |
4.6%
|
| 4 | Vaunix Technology Corporation |
4.1%
|
| 5 | B&K Precision Corporation |
4.1%
|
| 6 | National Instruments Corp. |
3.6%
|
| 7 | Madell Technology Corporation |
3.4%
|
| 8 | Spanawave Corporation |
3.4%
|
| 9 | FLUKE Corporation |
3.4%
|
| 10 | NovAtel Inc. |
3.2%
|
Derivation Method
The ranking is calculated based on the click share within the signal generator page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
14 | 35.0% |
|
China
|
7 | 17.5% |
|
Japan
|
5 | 12.5% |
|
Germany
|
2 | 5.0% |
|
United Kingdom
|
2 | 5.0% |
|
Italy
|
2 | 5.0% |
| Liechtenstein | 1 | 2.5% |
|
Russia
|
1 | 2.5% |
|
Canada
|
1 | 2.5% |
|
Spain
|
1 | 2.5% |
|
Switzerland
|
1 | 2.5% |
|
Malaysia
|
1 | 2.5% |
|
Netherlands
|
1 | 2.5% |
|
Israel
|
1 | 2.5% |
Wave Crest
240+ people viewing
Last viewed: 3 minutes ago
■ Overview ・ The signal generator of the SIGLENT SSG3000X series has a frequency range of 9kHz to 2.1GHz/3.2GHz. Provides normal analog modulation...
4 models listed
JEL SYSTEM CO,LTD.
20+ people viewing
Last viewed: 2 hours ago
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
30+ people viewing
Last viewed: 12 minutes ago
Naka & Company's TCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
60+ people viewing
Last viewed: 2 hours ago
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
JEL SYSTEM CO,LTD.
20+ people viewing
Last viewed: 3 hours ago
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
50+ people viewing
Last viewed: 3 hours ago
Naka & Company's TCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
40+ people viewing
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
JEL SYSTEM CO,LTD.
30+ people viewing
Last viewed: 4 hours ago
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
40+ people viewing
Last viewed: 17 minutes ago
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
JEL SYSTEM CO,LTD.
30+ people viewing
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
40+ people viewing
Last viewed: 4 hours ago
Naka & Company's VCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
30+ people viewing
Last viewed: 22 hours ago
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
JEL SYSTEM CO,LTD.
70+ people viewing
Last viewed: 12 minutes ago
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
70+ people viewing
Naka & Company's VCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
40+ people viewing
Last viewed: 3 hours ago
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
JEL SYSTEM CO,LTD.
30+ people viewing
Naka & Company's SPXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
30+ people viewing
Naka & Company's VCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
60+ people viewing
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
Japan INSDAC Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
■Features ・DDS technology design, ultra-low power consumption ・Frequency range: 0.01Hz~30kHz ・High frequency accuracy: ±5 x 10^-6 ・High frequen...
JEL SYSTEM CO,LTD.
60+ people viewing
Last viewed: 2 minutes ago
Naka & Company's TCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
80+ people viewing
Last viewed: 10 hours ago
Naka & Company's VCXO uses an analog circuit design method and can accommodate custom frequencies and special specifications. We have a lineup of p...
JEL SYSTEM CO,LTD.
40+ people viewing
Last viewed: 12 minutes ago
Naka & Company has a lineup of highly stable OCXOs for industrial equipment and fixed communications.
Japan INSDAC Co., Ltd.
20+ people viewing
Last viewed: 9 minutes ago
■Features ・Frequency coverage 100kHz~150MHz, harmonics maximum 450MHz ・Continuously adjustable output level ・AM and FM functions ・4-digit outpu...
TEXIO TECHNOLOGY CORPORATION
110+ people viewing
Last viewed: 14 hours ago
■New series of function generators with independent pulse output The MFG-2000 series is a signal generator with 1 or 2 main outputs and a pulse out...
2 models listed
Teledyne LeCroy
430+ people viewing
Last viewed: 6 hours ago
■ Characteristics ・ 10 models, including low -priced models, long memory models, wide -band models ・ Equipped with a touch panel (16 -bit model) ...
8 models listed
NIHON DEMPA KOGYO CO., LTD.
540+ people viewing
Last viewed: 4 minutes ago
We provide high -performance synthesizers based on high -precision, low jitter and low noise crystal oscillators. By adopting a company -made oscil...
8 models listed
NIHON DEMPA KOGYO CO., LTD.
290+ people viewing
Last viewed: 10 hours ago
We provide signal generators based on high -precision, low jitter and low noise synthesizers developed by our company. It applies a high -precisio...
Tokyo Instruments, Inc
30+ people viewing
■Product overview The DG645 digital delay pulse generator is a new generation of delay and pulse generator for trigger signal sources. This is the ...
T&M Corporation Co., Ltd.
40+ people viewing
■Summary ・Frequency range: 9kHz to 13.6GHz/20GHz ・Level setting range: -130dBm to 25dBm ・Phase noise: -120dBc/Hz@1GHz, 20kHz offset (typical val...
T&M Corporation Co., Ltd.
50+ people viewing
Last viewed: 3 hours ago
■Summary ・Frequency range: 9kHz to 13.6GHz/20GHz ・Level setting range: -130dBm to 25dBm ・Phase noise: -120dBc/Hz@1GHz, 20kHz offset (typical val...
