Sanko Industries Co., Ltd.'s Barometric Dampers

■Product features - Can operate with compressed air (0.4MPa to 0.7MPa) in factories and other plant facilities. - The drive unit is integrated with...

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Main structure/square ・H>200 is a multi-blade type wit...

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. HFD is less than 20m/s. -If installing near a blower, please ord...

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. -If installing near a blower, please order a high pressure type....

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. -If installing near a blower, please order a high pressure type....

• Controllers

• Barometric Dampers

Since FMD prioritizes fire prevention function, the structure and function of [Legal Compliance for Dampers] are the standard, and the blades are p...

• Controllers

• Barometric Dampers

■Product features ・This product provides corrosion protection against high-temperature air flow inside the duct and heat protection for external o...

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

Under normal conditions, it can be used as an RD (low differential pressure damper). It can be held fully closed by operating the motor. The amount...

• Controllers

• Barometric Dampers

■Case/feather t1.6 ■Axis Φ13 ■Bearing bearing ■Gasket polyethylene foam

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. HFD is less than 20m/s. -If installing near a blower, please ord...

• Controllers

• Barometric Dampers

■Structure - The main body is a square damper, and a T1.6 single pipe or circular FG is installed as the duct connection port. ・The upper limit of...

• Controllers

• Barometric Dampers

■Structure - The main body is a square damper, and a T1.6 single pipe or circular FG is installed as the duct connection port. ・The upper limit of...

• Controllers

• Barometric Dampers

■Measures for damper installation If a damper is installed close to the blower, the manufacturing specifications will change. We recommend a pressu...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating. Thermal fuse devices ...

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

■The airtight performance is intermediate between a high airtight type and a general damper. ・The static pressure at closing is limited to 2500Pa....

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・PD closes instantly by gas pressur...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating. Thermal fuse devices a...

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・PFD closes instantly by thermal fu...

• Controllers

• Barometric Dampers

The standard vacuum damper has an airtight structure. Appropriate control of operating performance is required for barotropic pressure (indoor pre...

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・SD shuts off instantly by interloc...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating. Thermal fuse devices a...

• Controllers

• Barometric Dampers

Also available with SEFD280℃ fire protection.

• Controllers

• Barometric Dampers

■Product features ・Compared to conventional products, airtight performance has been significantly improved. (Improves the airtightness of smoke ex...

• Controllers

• Barometric Dampers

Comes with a 280°C temperature fuse and fire protection.

• Controllers

• Barometric Dampers

■Product features ・Compared to conventional products, airtight performance has been significantly improved. (Improves the airtightness of smoke ex...

• Controllers

• Barometric Dampers

Seal around the polycarbonate window cover and FG section. The standard L dimension changes from 350mm to 450mm.

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・FD closes instantly by interlockin...

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

Main body/bearing part ■Casing and bearing frame Hot-dip galvanized steel plate T1.6 or higher ■Bearing Ball bearing casing internal type ■Axis ...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating.

• Controllers

• Barometric Dampers

■Product features ・This product is a three-way damper that automatically switches the air outlet depending on the air temperature. (No need to swi...

• Controllers

• Barometric Dampers

■Product features ・With a T-shaped 90-degree switching damper, one unit can switch between two conventional MD units, streamlining costs, space, a...

• Controllers

• Barometric Dampers

Seal around polycarbonate window covers. L=300

• Controllers

• Barometric Dampers

Seal around polycarbonate window covers. The standard L dimension changes from 200mm to 400mm.

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Main structure/circular - A simple circular CD-Z type. ...

• Controllers

• Barometric Dampers