70 Fuel Pump Manufacturers in 2024
This section provides an overview for fuel pumps as well as their applications and principles. Also, please take a look at the list of 70 fuel pump manufacturers and their company rankings. Here are the top-ranked fuel pump companies as of November, 2024: 1.CORNELL PUMP COMPANY, 2.Xylem Inc., 3.BLP Racing Products.
Table of Contents
What Is a Fuel Pump?
Fuel pumps are pumps used to supply fuel to an engine or other fuel-burning process.
It is also called a fuel pump. Fuel pumps include the following types of pumps, but in general, the term "fuel pumps" is used to refer to the feed pumps that deliver fuel to the fuel vaporizer of an engine. It is responsible for sucking fuel from the fuel tank and transporting it to the injectors, where it is sprayed into the engine cylinders.
- Feed pump
- Priming pump
- Injection pump
- Supply pump
Uses of Fuel Pumps
In the past, fuel tanks were located higher than the engine, allowing fuel to flow naturally to the engine. However, due to the diversification of engine positions and the need to control fuel inflow, fuel pumps are now indispensable.
Therefore, fuel pumps are basically used in all vehicles where engines are used, such as automobiles, motorcycles, aircraft, ships, agricultural machinery, and construction equipment.
Principle of Fuel Pumps
A fuel tank consists of two components: the pumps and the motor. The pumps intake the fuel and the motor will pump combustion gases and these two components work simultaneously to deliver fuel to the engine.
First, when the ignition is turned on, the fuel pumps are activated and the blades of the pumps rotate to fill the fuel pumps with fuel.
The impeller inside the pump then begins to rotate as the motor rotates. On the outside of the impeller, a vane groove exists, and using a small gap, an overflow is generated in the pump. This pressure is used to dispense fuel from the pump chamber.
In addition, since fuel pumps are located near where fuel combustion takes place, any malfunction can have a significant impact on other parts of the system.
For this reason, fuel pumps are also equipped with a device that automatically returns fuel to the fuel tank in the event of a malfunction.
Types of Fuel Pumps
Fuel pumps can be broadly divided into mechanical and electric types. There are two types of electric fuel pumps: the out-tank type, which is located outside the fuel tank, and the in-tank type, which is located inside the fuel tank.
1. Mechanical Type
Fuel pumps are powered by the rotational motion of the engine. A diaphragm made of leather or synthetic rubber inside the pumps moves back and forth in response to the movement of the engine camshaft to pump Fuel Pumps.
In the past, mechanical fuel pumps were used in cars with a carburetted fuel injection system.
However, the electric fuel pump is now the most commonly used type due to the following disadvantages: fuel tends to leak from the diaphragm, the pumping force varies depending on the engine speed, and the engine power loss occurs because the pump is operated using the engine's power.
2. Electric-Powered Type
Fuel pumps are powered by an electric motor to pump fuel. First, fuel is pumped by the electric motor and stored in the injectors at a constant pressure.
Then, an electric current is applied to the coil inside the injector that receives an electric signal for fuel injection, and fuel is sprayed at high pressure from the fuel injector.
Unlike mechanical fuel pumps, these pumps are powered by an electric motor, which allows them to pump fuel stably without loss of engine power. For this reason, electric fuel pumps are now the most commonly used type of fuel pumps.
There are two types of electric fuel pumps: the in-tank type, in which the pumps are located inside the fuel tank, and the out-tank type, in which the pumps are located outside the fuel tank.
The out-tank type has the advantage of easy replacement of the pump, but has the disadvantages of dangerous fuel splashing into the engine compartment in the event of a pump failure and the need for a return pipe to return fuel to the fuel tank.
In-tank Fuel Pumps are now the norm, as they do not have these disadvantages and have the advantage that the heat generated by the pump can be cooled by the fuel itself in the fuel tank.
Other Information on Fuel Pumps
1. Life Expectancy of Fuel Pumps and When to Replace Them
The service life of a fuel pump is said to be 50,000 to 100,000 km. However, technically speaking, the fuel pump also keeps running while the engine is running, so if the engine is running for a long time even if the mileage is short, as in a car that idles a lot, the service life will be shortened.
If the Fuel Pumps fail, no fuel will be delivered to the engine and the car will not start, so it is important to inspect and replace them regularly.
When replacing the fuel pumps, the rear seat and fuel tank are removed. The area around the fuel pumps is intricate with wiring and hoses, making it difficult to perform the replacement on one's own. It is recommended that the fuel pumps be replaced by an auto mechanic.
2. Failure of the Fuel Pumps
The criteria for determining whether the fuel pumps have failed are as follows:
- A loud motor noise, such as a whirring sound, is heard while driving
- The engine does not start when attempting to start.
If any of these symptoms are observed, the fuel pumps may be malfunctioning. Contact a service provider immediately for inspection and replacement of the fuel pumps.
List of 70 Fuel Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Australia
- Canada
- China
- Germany
- Hong Kong
- India
- Italy
- Japan
- Slovenia
- Spain
- Sweden
- Taiwan
- Thailand
- United Kingdom
-
-
-
CORNELL PUMP COMPANY
CENTRIFUGAL PUMPS
Manufacturer Overview
Cornell Pump Company, founded in 1946 in Clackamas, Oregon, USA, is a manufacturer and supplier of robust pumping solutions. The company designs and produces a wide range of pumps, including centrifugal pumps, agricultural pumps, industrial pumps, and more. These pumps find applications in various sectors, such as agriculture, municipal water systems, mining, and food processing. Besides, the company is an great provider of efficient and ideal pumping solutions worldwide. Courtesy of its aim for quality and effectiveness, Cornell Pump continues to meet the diverse needs of its clients across different industries.
-
-
-
-
Manufacturer Overview
ITT Inc., originally founded in 1920 and headquartered in Stamford, Connecticut, is an American multinational manufacturer specializing in specialty components for a wide range of industries. Through its subsidiaries, the company delivers engineered solutions for specific sectors. In aerospace, it provides custom components to enhance safety and efficiency in passenger and freight transportation. The company also offers electrical penetrator solutions for the oil and gas sector and impact energy absorption technology for automotive and heavy vehicles. Moreover, it supplies pumping solutions for the chemical, food and beverages, medical, and pharmaceutical industries. In infrastructure, the company specializes in shock and vibration isolations.
-
-
-
-
-
Macnaught USA, Inc.
High Flow Fuel Transfer Pump
Manufacturer Overview
Macnaught USA, Inc. was founded in Australia in 1948 as a manufacturer of robust industrial flow meters for clean process liquids. Its product line encompasses equipment for fluid handling, fuel transfer, grease, oil handling, including Macnaught OIL Equipment, Macnaught BOP (Battery Operated Oil Pumps), lubrication equipment, high-flow fuel transfer pump systems, retractable hose reels, and Industrial Flow meters, among other offerings.The company supplies equipment for coal handling, lubrication, hose reels with motors, flow meters, and various other products, with its flow meters and fluid handling equipment serving the agriculture, mining, and vehicle repair industries.
-
-
-
-
-
Xylem Inc.
Diesel Transfer Pump
Manufacturer Overview
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
-
-
-
-
-
KNEADER MACHINERY USA, LLC
In-Tank Fuel Pump
Manufacturer Overview
KNEADER MACHINERY USA, LLC is a manufacturer of kneaders and mixers headquartered in Ohio, USA. The company offers intermesh tilt kneader mixers and tangential kneaders, available in various models such as the MXI-1L, MXI-50, and MXI-140. It also provides dump extruders, including the TSP, TYR, PR, and TFR series, along with batch-performance extruders. The company has a full-scale trial facility equipped with testing machines like dispersion mixers, rotor mixers, and gear pump extruders to meet client needs. It caters to multiple sectors, including the rubber, molding, and plastics industries.
-
-
-
-
-
HK Surgical
Fuel Pump
Manufacturer Overview
HK Surgical is a manufacturer of a wide range of products for liposuction and other cosmetic procedures, founded in 1998 and headquartered in California, USA. The company specializes in the development and manufacturing of products for vascular surgery, liposuction, and cosmetic surgery. Its product line includes aspiration pumps (APIII), infiltration and aspiration tubings, Klein microcannula sets for infiltration and aspiration, and super absorbent pads. It also produces post-operative compression garments and various OR accessories. The company obtained ISO 13485:2016 and EC certifications and caters to the needs of the cosmetic and medical sectors.
-
-
-
-
-
BLP Racing Products
FUEL PUMPS
Manufacturer Overview
BLP Racing Products, established in 1950 and based in Orlando, Florida, United States, is a manufacturer of engine parts. The company manufactures parts such as engine accessory drive components, Holley-modified racing carburettors, gaskets, BLP Billet racing carburettors, and fuel system drive components. It has carburettor inventory parts and offers machining services. BLP uses only USA-grade materials for manufacturing machining parts and it is made in CNC machining centres with CNC technology. It also manufactures Billet Xtreme series carburettors and billet components.
-
-
-
-
-
Vogel Manufacturin
Fuel Pump
Manufacturer Overview
Vogel Manufacturing, headquartered in Oshkosh, Wisconsin, USA, has been a manufacturer of garden tractor pulling parts and related solutions since 1975. The company provides a wide range of products for garden tractor pulling, such as pistons, camshafts, connecting rods, carburetors, air filters, tires, wheels, and more. These products are designed to enhance the performance and durability of garden tractors for various racing applications. The company also provides custom fabrication and engineering services to meet the specific needs of its customers.
-
-
-
-
-
PowerTech Mobile Generators
Fuel Pump
Company Overview
PowerTech Mobile Generators, founded in 1989 and headquartered in Leesburg, Florida, is a manufacturer of mobile diesel and gas generators ranging from 12kW to 40 kW. The generators are offered either open or enclosed and have a 4-point mounting system to reduce vibrations. The company also provides an App for tracking the generator or vehicle location while staying up-to-date on metrics such as temperature, tank levels, and engine performance. The company distributes its products worldwide through distributors and service dealers, and its mobile generators are used in several areas, including on medical vehicles, food trucks, and luxury coaches.
-
-
-
-
-
AEM Performance Electronics
High-Flow Fuel Pumps
Company Overview
AEM Electronics founded in Hawthorne, California, USA, in 1987, is a manufacturer and distributor of ICE and EV vehicle control units and supporting electronics. Products offered by the company are motorsports electronics, digital dash displays, EV control units, and power distribution modules. It is a subsidiary of Holley Performance Products. The company recruits team members through colleges and universities to fill vacant positions and has 50 employees. It operates with brands including APR, DiabloSport, and Edge Products.
-
-
-
-
-
Derale.
Performance Fuel Pumps
Company Overview
US Motor Works, LLC, established in 1995 and headquartered in Santa Fe Springs, California, is a manufacturer and distributor specializing in automotive and heavy-duty engine parts and components. The company's product range includes USMW heavy-duty water pumps, USMW professional series, Pacer flexy flare rubber fender extensions, Pacer Hi-Five cab roof lights, and gauge sending units. These products are applicable in various sectors, including automotive, performance, heavy-duty, OEMs, and the aftermarket. The company sells through brands including Derale Performance, Pacer Performance, USMW Heavy Duty, USMW Professional Series, and OSC Heat Transfer Products.
-
-
-
-
-
American Fleet, Inc.
Fuel Pump
Company Overview
American Fleet Inc. established in 1988 and based in Springfield, Missouri, USA, is a manufacturer and supplier of remanufactured Detroit diesel engines. The company’s product lineup includes exchange remanufactured engines, custom engine builds, and complete diesel engine overhauls, providing services to industries such as trucking, construction, and industrial equipment. These products are useful for ensuring uninterrupted operation and longevity of heavy-duty diesel motors. The company's services include a complete parts warehouse of new and used items.
-
-
-
-
-
EDELBROCK, LLC.
Black Electric Fuel Pump
Company Overview
EDELBROCK, LLC., established in 1938 and headquartered in Mississippi, USA, is a manufacturer and distributor of performance replacement parts for the automotive after markets. The company's product line includes camshafts,carburetors, crate engines, cylinder heads and superchargers. It diversified its product line by developing an intake for a small-block Chevrolet and various power-producing manifolds. It uses state-of-the-art equipment for manufacturing, such as the Siemens NX7 design suite, Computational Fluid Dynamic (CFD) software, and 3D rapid prototyping. The company has various testing equipment such as super Flow computerized engine dynos which can measure separate engine variables up to speeds of 12,000 rpm.
-
-
-
-
-
Motor Components, LLC
FUEL FEED PUMPS
Company Overview
Motor Components, LLC, an American company founded in 1950 and headquartered in Elmira, New York, is a manufacturer and supplier of electronic fuel pumps. The company's range of pumps includes Facet Gold-Flo Electric Fuel Pumps, Facet Cube Electric Fuel Pumps, Facet Posi-Flo Electric Fuel Pumps, Facet Dura-Lift Electric Fuel Pumps, and Dura-Lift IIs. These pumps are used in various industries, including agriculture, automotive, construction, marine, and the military. The company's facility is ISO 9001:2015 certified for its quality management system.
-
-
-
-
-
AeroControlex
Fuel Pumps
Company Overview
AeroControlex, established in 1945 and based in Cleveland, Ohio, USA, is a manufacturer and supplier of hydraulic pumps. The company's product range includes Mechanical Actuators, Ball Bearing Control Cables, Sliding Control Cables, Gearboxes, and Fuel Pumps. These products are integral for aerospace manufacturing and design. They serve the Aerospace, Defense, Nuclear, and Marine industries. The company also offers services such as repair and overhaul, engineering support, product upgrades, and factory warranties.
-
-
-
-
-
GMB North America
Fuel Pump
Company Overview
GMB, founded in 1943 with headquarters in the USA, is a global manufacturer of OEM and aftermarket automotive parts, components, and accessories. The company's extensive product line includes car batteries, electric water pumps, fan clutches, timing belt kits with water pumps, and universal joints. GMB brand auto parts are available to consumers through a diverse range of suppliers, including Amazon, Auto Parts Warehouse, Auto Tech Warehouse, Mizumo Auto Parts, and Summit Racing. Wholesale product supply is available through AutoBarn, AutoPride, Cold Air Distributors, Fisher Auto Parts, and many more distributors.
-
-
-
-
-
Aeromotive, Inc.
Fuel Pumps
Company Overview
Aeromotive, Inc., established in 1994 and based in Lenexa, KS, USA, is a manufacturer and supplier of performance fuel systems. The company's product range includes accessories & electronics, diesel products, fuel filters, fuel pressure regulators, and fuel pumps. These products provide efficient fuel flow, enhanced fuel filtration, and optimized fuel pressure for vehicles. The company serves the automotive aftermarket, racing, marine, and trucking industries. Its services include technical assistance, installation guidance, power planning, and system diagramming.
-
-
-
-
-
Autobest
Fuel Pumps
Company Overview
Autobest, established in 2007 and based in South El Monte, CA, USA, is an ISO/TS 16949:2009 certified manufacturer and supplier of fuel system products. The company's product range includes Transfer Fuel Pumps, Universal Fuel Pumps, Direct Fit Fuel Pumps, fittings, and filters. These products are used to transfer fuel in applications such as ATVs, snowmobiles, tractors, lawnmowers, and generators. The industries Autobest serves include automotive sectors for various vehicles, both factory-made and aftermarket. The company offers services like technical support, customer service, sales inquiries, and media inquiries.
-
-
-
-
-
Weldon Pump LLC
Fuel Pumps
Company Overview
Weldon Pump LLC, established in 1942 and based in Oakwood Village, Ohio, USA, is an ISO 9001:2015 + AS9100D certified manufacturer and supplier of fuel pumps. The company's product range includes Fuel Pumps, Injection Pumps, Hydraulic Pumps, Fluid Transfer Pumps, and Pressure Valves. These products are designed for different aircraft and ground support vehicles. They serve the general aviation, military aircraft, ground support, and UAV industries. The company offers services such as overhaul and repair, design-build capabilities for aircraft fluid pump systems, and testing procedures.
-
-
-
-
-
-
-
BorgWarner Inc.
Fuel Pumps
Distributor Overview
BorgWarner Inc., is an American automotive supplier headquartered in Auburn Hills, Michigan, established in 1928. The company designs and produces systems that advance the world towards eMobility, providing sustainable mobility solutions for the vehicle market. They also offer technologies and solutions for internal combustion, hybrid, and electric vehicles, catering to light, medium, and heavy-duty vehicles as well as off-highway applications. Guided by their core principles of inclusion, integrity, excellence, responsibility, and collaboration, they are moving toward achieving carbon neutrality by 2035. They operate 93 production facilities and technical systems across 22 countries and employs approximately 49,000 workers.
-
-
-
-
-
SHAANXI AEROSPACE POWER HI-TECH CO.,LTD.
Fire Pump
Manufacturer Overview
Shaanxi Aerospace Power High Technology Co. Ltd. is based in Xi’an City, China, and is a manufacturer of aerospace power equipment established in 1999 as a subsidiary of China Aerospace Science and Technology Corporation (CASC). The company produces various gas and flow meters, torque converters, and specialized tanks. These include crystallizers, industrial vehicle torque converters, and hydraulic turbines. It also offers reactor vessels and filter presses, which are mainly used in the oil and gas, energy generation, and military sectors.
-
-
-
-
-
SPP Pumps Limited
Contractors Pumps
Manufacturer Overview
SPP Pumps Limited, established in 1875 as The Pulsometer Engineering Company Ltd. and manufacturing in Gloucestershire, United Kingdom, as SPP since 1986 with headquarters in Berkshire, United Kingdom, is a manufacturer and supplier of industrial pumps and liquid and gas flow systems. The company's products include fire water pumps, vertical turbine pumps, and end-suction pumps. It also offers special-project products, including submersible pumps and portable contractor pumps for smaller projects. It serves industries that include hydro engineering, dewatering, and energy. SPP Pumps, Inc. is headquartered in Norcross, Georgia, United States.
-
-
-
-
-
DAIKIN INDUSTRIES, Ltd.
Pumps
Manufacturer Overview
Daikin Industries Ltd., founded in 1924 with headquarters in Japan, is a Japanese multinational conglomerate company and manufacturer of numerous products and equipment. The company's products include home appliances, chemicals, medical equipment, electronics, and oil hydraulics used in the automotive, semiconductor manufacturing, home and living, and aerospace industries. Examples of Diakin's products include CAD software, mobile hydraulic equipment used in road construction, commercial-use air conditioners, residential air conditioners, and fluoropolymer-coated cookware. Daikin is constantly referred to as the world's largest air conditioner manufacturer, but recent expansion into the in Indian market has removed any doubt.
-
-
-
-
-
Zhejiang Jiasong Technology Co.,Ltd.
FUEL DISPENSER PARTS
Manufacturer Overview
Zhejiang Jiasong Technology Co. Ltd. is a petroleum equipment manufacturer established in 1983 and based in Wenzhou, Zhejiang, China. The company specializes in equipment used to facilitate the distribution, transportation, and monitoring of petroleum. Its products include flowmeters, fuel dispensers, and pumps used in oil refineries and oil tankers. The company also offers commissioning, installation, and calibration service for its customers with unique project parameters. Some of its notable clients include Shell, Sinopec, and BP.
-
-
-
-
-
Bosch Industriekessel GmbH
Gasoline Fuel Systems
Manufacturer Overview
Bosch Industriekessel GmbH is based in Bavaria, Germany, and is a manufacturer of industrial boilers that was originally established as Loos in 1865 before its acquisition and rebrand by Bosch Thermotechnik GmbH. The company’s product lineup includes heating boiler systems for public facilities or buildings, steam boilers for commercial or industrial use, and hot water boilers for standard heating operations. It also offers thermal and process heating system solutions for customers requiring additional assistance. The company serves clients in the industrial and commercial sector, as well as German public utility companies.
-
-
-
-
-
Shihlin Electric&Engineering Corp
Fuel Pump
Manufacturer Overview
Shihlin Electric and Engineering Corp, founded in 1955 and headquartered in Taipei, Taiwan, is a manufacturer of heavy electrical systems, electrical equipment, machinery, and automation. The company offers a diverse product catalog, including miniature circuit breakers, magnetic contactor switches, molded case circuit breakers, oil-immersed distribution transformers, and Shihlin SDC-A servo - economic pulse type. These products have applications in domestic electrical distribution, factory automation, laboratory power supply, aeronautics and defense, and renewable energy.
-
-
-
-
-
Elettromeccanica Delta S.p.A.
FUEL PUMPS
Manufacturer Overview
Elettromeccanica Delta S.p.A. is an Italian ISO 9001 certified manufacturer of safety and control products for combustion equipment founded in 1961 and based in Arcade, Treviso. The company's product portfolio includes burner control units for gas firing appliances, proportional flow control valves, solenoid actuators for control valves, air-to-gas ratio controllers, and gear pumps for oil burners. It also offers design and engineering services for customers with unique project parameters. The company's products are primarily used by client boiler and furnace installation companies, HVAC manufacturers, power generation facilities, and waste incineration plants.
-
-
-
-
Manufacturer Overview
SKF UK is the British division of SKF, originally founded in 1907 and headquartered in Gothenburg, Sweden. SKF designs, develops, and manufacturers bearings, seals, lubrication systems, and services worldwide, with industrial and automotive segments, providing solutions for industries including aerospace, agriculture, transportation, food and beverage, general machinery, material handling, mining, energy, paper, and wind energy. SKF UK offers rolling bearings, mounted bearings, automotive seals, lubrication management, vehicle aftermarket services, waste electric products, and electronic equipment products as well as services including maintenance, remanufacturing, customization, and training.
-
-
-
-
-
Adam Pumps S.p.A.
Volumetric electric pump
Manufacturer Overview
Adam Pumps S.p.A. was founded in 2010 and is headquartered in Campogalliano, Italy is a manufacturer of pumps and meters for gasoline. The company offers an array of products including oil flow display meters, diesel fuel transfer pumps, and transfer kits for transporting urea. These products find applications in waste and management plants, petrochemical industries, and oil and gas refineries. Its philosophy is to ensure continuous improvement of the products, and fast response to the customer’s requirements.
-
-
-
-
-
Yongjia Jiangbei Yiben Machinery Co.,Ltd
Anti Explosion Transfer Pump with Stand
Manufacturer Overview
cYongjia Jiangbei Yiben Machinery Co.,ltd, established in 2008 and based in Wenzhou, China, is a manufacturer and supplier of electric fuel transfer pumps and pump kits. The company's product portfolio includes explosion-proof pumps, manual oil nozzles for refueling equipment, and oil flow meters. These products are used in various industries, including agriculture, construction, and marine and shipping. The company exports to more than 20 countries, including the United States, Germany, and Malaysia, while its products have CE certificates and ISO standard guarantees.
-
-
-
-
-
EMILIANA SERBATOI
DC Fuel Transfer Pumps
Manufacturer Overview
EMILIANA SERBATOI founded in Campogalliano, Modena, Italy, in 1983, is a manufacturer of storage and transportation equipment for petroleum products and other liquids. The company manufactures water tanks, underground storage tanks, fuel transport tanks, and fuel monitoring systems. It also produces biodiesel tanks that are used to store renewable fuel and prevent any environmental impact or degradation. It serves the construction, agriculture, oil and gas, marine, and transport fields. It is a member of PEI and ARA and has built generator steel tanks for the United Nations Organization.
-
-
-
-
-
C.R.I. Pumps Private Limited
DIESEL ENGINE PUMPS
Manufacturer Overview
C.R.I. Pumps Private Limited was founded in 1961 and is a manufacturer of irrigation equipment products based in Coimbatore, Tamil Nadu, India. The company manufactures various products such as end suction pumps, pressure boosting system, deep well submersible motors, shallow well submersible pumps, and centrifugal monoblock pumps. The products have been used in various applications such as agriculture, residential, waste water management, building management, and power plant. The company has obtained various certifications such as ISO 9001, ISO 14001, OHSAS 18001, CE, and CSA.
-
-
-
-
-
Johnson Electric
Automotive Pumps
Manufacturer Overview
Johnson Electric, since 1959, is a manufacturer of motors, micro-switches, solenoids, microelectronics, and flexible printed circuits based in Shatin, Hong Kong. Their products include AC motors, automotive switches & subsystems, cargo bikes, EMI-shielded flexible circuits, snap action switches, used in automotive, building automation, digital security, food & beverage, and laboratory equipment. Johnson Electric has been in the Hang Seng Corporate Sustainability Benchmark index since 2018. The Hong Council of Social Service awarded it the 5+ caring company award in 2022-2023 and additionally, it is an Institute of Business Ethics supporter.
-
-
-
-
-
INSORT GMBH
Fuel Injection Pumps
Manufacturer Overview
INSORT GMBH is a developer and manufacturer of digital sorting and monitoring systems based on chemical imaging technology, founded in 2011 and headquartered in Berndorf, Austria. The company's primary product line is the Sherlock series of optical sorters, featuring the Sherlock Hypernova, Sherlock Safeguard, Sherlock Air, Sherlock Hybrid, and Sherlock Separator. These machines are designed to visually display the chemical composition of food in images, gather precise data, and remove defects and contamination. The company has offices in Austria, the USA, and Canada, catering to the needs of the food processing sector.
-
-
-
-
-
Changzhou Tonghui Electronic Co. Ltd.
Diesel Fuel Lift Pump
Manufacturer Overview
Changzhou Tonghui Electronic Co. Ltd. is a manufacturer of electronic testing and measurement instruments founded in 1994 and based in Changzhou, Jiangsu, China. The company produces equipment used for testing and measurement processes, and related accessories. Its products include capacitance meters, insulation testers for electrical safety compliance testing, and automatic semiconductor test systems. It also offers data loggers, power supply units, and test leads. The company's products are mainly used by clients in the microelectronics, semiconductor, and defense sectors.
-
-
-
-
-
Shenzhen OuShiEn Technology CO., Ltd,
Fuel Pumps
Manufacturer Overview
OSN Laser is a high-tech manufacturer and enterprise that has been specializing in developing, manufacturing, and selling industrial laser equipment systems, like laser welders, and laser markers for jewelry, electronics, eyewear, dental, and industrial tool.
-
-
-
-
-
Flexipack Group
FUEL PUMP
Manufacturer Overview
Flexipack Group, established in 2003 and headquartered in Bangplee, Thailand, is a manufacturer of industrial packaging products. The company's products include protective and insulation solutions such as air bubbles, VCI plastic, and moisture barrier bags for the construction and industrial sectors. Its polyolefin shrink film and BOPP heat sealable film are used for food, beverage, and consumer packaging. It provides EPE foam, static shielding bags for electronic and automotive sectors, and aluminum blisters and alu-alu foil package medications for the pharmaceutical industry. The company also produces PVC and PVDC rigid films for additional pharmaceutical applications.
-
-
-
-
-
HKS CO.,LTD
FUEL PUMP
Manufacturer Overview
HKS CO. LTD. is a Japanese manufacturer and distributor of aftermarket automotive parts as well as components established in 1973 and based in Fujinomiya, Shizuoka. The company offers a wide selection of aftermarket tuning products including exhaust manifolds and systems, electronic components such as boost controllers and turbo timers, vehicle-specific supercharger kits, and intercooler systems. It also offers carbon engine covers, fuel injectors, tool sets, blow-off valves, and body kits. The company's products are primarily used by tuning shops and car enthusiasts, with additional applications in major motorsports events such as Formula Drift Japan and Super GT.
-
-
-
-
-
MZW Motor
Fuel Pump
Manufacturer Overview
MZW Motor, based in Ruian, China, is a manufacturer of a diverse selection of aftermarket starter motors and related products. The company mainly crafts starter solenoids, starter armatures, suspension parts, steering wheels, and radiators. It also fabricates brake rotors, brake pads, fuel tanks, oil filters, and cabin air filters. Its starter solenoids go through various tests, including coil resistance, volt drop, additional travel, hold current, as well as release volt tests, and have passed ISO/TS 16949 quality standards.
-
-
-
-
-
KOSHIN LTD.
Engine Pump
Manufacturer Overview
KOSHIN LTD., established in 1948 in Kyoto, Japan, is a manufacturer specializing in pumps and related products. Its product offerings encompass diverse pumps such as diesel engine pumps for construction, high-pressure pumps for agriculture, semi-trash pumps for construction, clear water pumps for gardening, and grinder pumps for industrial applications. These pumps serve various purposes, including powering construction machinery, irrigating agricultural fields, managing debris-laden water at construction sites, maintaining garden water features, and handling industrial waste efficiently. The company distincts on enhancing convenience, solving problems with technology, and improving social infrastructure.
-
-
-
-
-
Delphi
Fuel Modules and Pumps
Manufacturer Overview
Delphi Autoparts, established in 1998 and headquartered in Michigan, US, is a manufacturer that offers aftermarket solutions to fuel economy. The company offers a wide range of products, including gasoline fuel systems, diesel fuel systems, maintenance solutions, engine management, and vehicle electronics. It also provides comprehensive diagnostics, test equipment, and robust training to help repair vehicles. Its product delivers fewer hydrocarbons, particulate emissions, and increased fuel savings. Frost & Sullivan recognized the company with the 2017 North American Company of the Year Award. It serves industries such as passenger vehicles, marine vehicles, agricultural vehicles, and more.
-
-
-
-
-
Ruhrpumpen
CRP ISO Process Pump
Manufacturer Overview
Ruhrpumpen, established in 1950 and headquartered in Garza García, Mexico is a manufacturer and supplier of advanced pumping solutions. Their comprehensive product line includes centrifugal and reciprocating pumps, designed to cater to diverse industries such as oil and gas, water treatment, and chemical processing. The company’s engineering excellence, Ruhrpumpen plays a pivotal role in ensuring efficient fluid transport and management globally. With a legacy of invention and reliability, they subsidize significantly to industrial processes, providing modern solutions for fluid handling challenges across various applications.
-
-
-
-
-
Caterpillar
FUEL PUMPS
Manufacturer Overview
Caterpillar, established in 1932, and based in the year Peterborough, UK, is a manufacturer and supplier of machinery tools. Their product portfolio includes air conditioning kits, batteries, belts, electronics, engine parts, hardware, sensors, supplies, and machinery tools. The products are used in various industries which include construction, mining, diesel, natural gas, industrial turbines, and electric locomotives. The company also offers the right parts and fast support for machines to achieve maximum productivity.
-
-
-
-
-
Komptech GmbH
FUEL PUMP SERIES
Manufacturer Overview
Komptech GmbH is based in Frohnleiten, Austria, and is an ISO 9001-certified manufacturer of machinery for waste recycling and biomass treatment established in 1992 as a subsidiary of Farmtech. The company's product lineup includes stone separators for removing stones and heavy materials from waste streams, biological treatment systems for composting and anaerobic digestion, and windrow turners for aerating and mixing compost piles. It also offers after-sales support, such as personnel training, maintenance, and installation services. The company chiefly serves clients in the biomass energy production, waste management, and agricultural sectors.
-
-
-
-
Manufacturer Overview
ETA is a manufacturer of storage and process tanks established in 1959 and located in Les Aix d’Angillon, France. The company offers specialized process tanks for different industrial processes, industrial food processors for cooking or mixing, and storage tanks for storing water or chemicals. It also offers automated CIP cleaning stations for production equipment, heat exchange equipment for melting or cooling processes, and on-site services such as maintenance and commissioning. The company serves clients in the pharmaceuticals, food processing, and cosmetics industries.
-
-
-
-
Motorcraft
Fuel Pumps
Manufacturer Overview
Motorcraft, founded in St Muncie, IN, is a manufacturer of Household Appliances and Commercial and Industrial Machinery and Equipment. The company's product portfolio includes Air Conditioners, Alternators, Batteries, Starting and Charging and Belts & Hoses. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and healthcare. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
-
-
-
-
-
MacLellan Rubber Ltd
Fuel Pump
Company Overview
MacLellan Rubber Ltd. is a manufacturer and supplier of rubber sheeting and rubber matting, established in 1871 and headquartered in the West Midlands, UK. The company offers a range of rubber sheeting, such as neoprene, EPDM, and silicone, along with foam and sponge sheeting and jointing sheets. It also provides sealing products, braided pump and valve packings, as well as electrical insulation and general-purpose matting. The company supplies gaskets, seals, and fabricated products across the UK and Europe. It complies with REACH, RoSH, and PAH standards, has CE certification, and serves various industries like electronics, aerospace, automotive, and manufacturing.
-
-
-
-
-
CHARCOAT PASSIVE FIRE PROTECTION
Universal In-tank Fuel Pumps
Company Overview
CHARCOAT PASSIVE FIRE PROTECTION is a manufacturer and supplier of passive fire protection (PFP) products and solutions, established in 1994 and headquartered in British Columbia, Canada. The company offers cable coatings, steel coatings, fire mortars, sealants, and pipe wraps. It also offers insulation protection, such as CharCoat IC-coated insulators and IC testing. The company has operations in Thailand, Malaysia, the Philippines, India, and South Africa. It holds ASTM, UL, FM, and IEC certifications, serving the needs of the industrial, oil and gas, commercial, and residential sectors.
-
-
-
-
-
PTZ d.o.o.
Fuel Pumps
Company Overview
PTZ d.o.o., established in 2004 and based in Slovenia, is an ISO 9001:2015 certified manufacturer and supplier of fuel pumps. The company's product range includes Fuel pumps for Cars, Cooling pumps, Water pumps, Electrical Fuel pumps, and Mechanical Fuel pumps. These products are suitable for applications in vehicles, marine engines, agricultural machinery, and cooling systems. The company serves industries such as General Purpose Machinery Manufacturing, Machinery Manufacturing, and Pumps and Pumping Equipment. The company's services include fast delivery of goods, product range expansion, offering competitive and quality products, and adhering to quality standards.
-
-
-
-
-
Kamal Industries
Fuel Pumps
Company Overview
Kamal Industries, established in 1991, is a manufacturer, and distributor of fuel dispensing equipment, based in Ahmedabad, Gujarat. The products are flow meters, diesel bowsers, fuel dispensers, fuel or manual nozzles, and fuel transfer equipment such as bio-diesel transfer pumps, drum filling pump units, and drum filling pumps serving the oil and petroleum corporations. The company is a certified seller of OPW products in India and offers petrol dispensing repair services.
-
-
-
-
-
Airtex Products, S.A.U,
Fuel Pump
Company Overview
Airtex Products, S.A.U, established in 1953 and based in Zaragoza, Spain, is a manufacturer and supplier of automotive water and fuel pumps. The company's product range includes water pumps, fuel pumps, and distribution kits. These products are crucial for the efficient operation of vehicles, ensuring optimal cooling and fuel delivery. The company serves industries such as automotive manufacturing, commercial vehicles, heavy trucks, and aftermarket parts. The company's services are marked by technical support, product design, global distribution, and adherence to OEM specifications.
-
-
-
-
-
Montalbano srl Unipersonale
AUTOMOTIVE
Company Overview
Montalbano srl is a manufacturer and supplier of recycling products and equipment that was established in Carinin, Italy, in 2005. The company specializes in recycling solutions for metal, plastic, wood, and organic waste. These include preparation machines such as separators and pelletizers, as well as processing systems such as granulators, shredders, and briquetting machines. It also offers processing equipment, including washers, dryers, and extruders, along with consulting and custom engineering services. The company’s products are commonly used in construction, demolition, recycling, and waste management operations.
-
-
-
-
-
K&N Engineering, Inc.
FUEL PUMP
Company Overview
K&N Engineering Inc., established in the 1960s and based in California, United States, is a manufacturer and supplier of filtration solutions. Its product portfolio includes air intake systems, oil filters, fuel filters, cabin air filters, and home air filters. The company also offers services such as horsepower testing, airflow testing, dynamometer, and vibration testing solutions. They are used in multiple industries including aerospace, automotive, industrial solutions, powersports, cleaners, and chemicals.
-
-
-
-
-
Hitachi Astemo, Ltd.
Fuel Pumps
Company Overview
Hitachi Astemo, Ltd., founded in 2009 in Tokyo, Japan, is a manufacturer and supplier of motorcycle and automotive products in the aftermarket industry. The company supplies auto products such as racing brake pads, competition carburetors, front fork repair parts, chassis systems and diagnostic tools which help to combat environmental pollution in the globe. It distributes the products to countries like America, Mexico, China, Japan, and India. The company also owns these brands: Hitachi, Toxico, Keihin, Nissin, and Huco.
-
-
-
-
-
Carter Fuel Systems, LLC
Fuel Pumps
Company Overview
Carter Fuel Systems, LLC, established in 1909 and based in Rochester Hills, MI, USA, is an IATF16949 and ISO9001 certified manufacturer and supplier of fuel pumps. The company's product range includes Fuel Pumps, Brushless Fuel Pumps, Electric Fuel Pumps, Mechanical Fuel Pumps, and Water Pumps. These products serve domestic, import, diesel, and marine vehicles. The industries include the automotive sectors for domestic, import, diesel, and marine vehicles. The company offers engineered designs, product validation testing, and warranties.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wollam Ag Center
Fuel Pumps
-
-
-
-
-
Robert Bosch LLC
High Pressure Pumps
-
-
-
-
-
Honeywell Aerospace
Fuel Pumps
Company Overview
Honeywell International Ltd., a global conglomerate headquartered in the United States, is a major technology company providing a wide range of aerospace solutions since 1906. The company's product portfolio encompasses aerospace systems, industrial automation, and connected solutions for homes and buildings. Their solutions can reduce the risk for the plane accidents, designed to aid pilots in safe take-off and landing, Increase flight crew awareness, and pinpoint precise airplane location to aid landings. The advancement of urban air mobility and increase in commercial travel will challenge the modern airspace and their products offer gain visibility and control to keep flights safe.
-
-
-
-
-
DENSO Products and Services Americas, Inc.
Fuel Pumps
Company Overview
DENSO Products and Services Americas, Inc., a subsidiary of DENSO Corporation, is a US-based company established in 1971 which distributes non-automotive products, as well as the remanufacturing of automotive electrical components. The company is a pioneer in the field of industrial robotics and is the largest user of small assembly robots utilized by companies worldwide. Their success can be attributed to their strong partnerships and accomplishments in the industrial robotics sector, remaining at the forefront of the industry.
-
-
-
-
-
Williams Chemical Injection Pumps
W Series Plunger Pumps
Distributor Overview
Williams Chemical Injection Pumps was founded in 1965 and is a supplier of gas distribution specialized equipments based in Ivyland, Pennsylvania, United States. The company provides various products such as solar chemical injection pump, low pressure diaphragm pump, and pressure control valve. These products are used in various industries such as petrochemical, chemical, and oil and gas industries. The company has been certified to various standards such as ISO 9001, ISO 14001, and OHSA 18001.
-
-
-
-
-
Estes Material Sales, Inc.
ROTARY DIESEL FUEL PUMP
Distributor Overview
Copyright Estes Materials Sales, Inc., an American company founded in 1979 and headquartered in Hope, Indiana, is a supplier specializing in natural stone products. The company's product portfolio includes decorative gravels, pathway stones, full veneers, grass seeds, and polymeric sands. These products are used in various applications, including landscaping, stone yards, lawn care, sports fields, and construction and building. The company provides services, including delivery, assistance with loading, a wholesale program, installation, and maintenance of decorative gravel.
-
-
-
-
-
Separ America LLC
Hand Priming Pump
Company Overview
Separ America LLC is based in Davie, Florida, USA, and is a distributor of water and fuel filtration systems that was established in 1995 before becoming a subsidiary of Germany’s Willibrord Losing Filter-Technik. The company stocks its SWK-2000 series fuel-water separators for protecting fuel systems and avoiding engine failure, its LKF series ISO/TS 16332-certified coalescence filter with >95% water separation from diesel fuel. It also offers its Evo-10 brand non-ferrous fuel-water separator to protect engines from free water and particulates. The company mainly markets to clients in the power generation, transportation, and agriculture sectors.
-
-
Fuel Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | CORNELL PUMP COMPANY |
4.0%
|
| 2 | Xylem Inc. |
3.1%
|
| 3 | BLP Racing Products |
3.0%
|
| 4 | GMB North America |
3.0%
|
| 5 | Macnaught USA, Inc. |
2.8%
|
| 6 | HK Surgical |
2.7%
|
| 7 | ITT INC. |
2.7%
|
| 8 | Vogel Manufacturin |
2.6%
|
| 9 | Aeromotive, Inc. |
2.5%
|
| 10 | AEM Performance Electronics |
2.5%
|
Derivation Method
The ranking is calculated based on the click share within the fuel pump page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Shihlin Electric&Engineering Corp: 3,939
- Delphi: 850
- HKS CO.,LTD: 413
Newly Established Company
- INSORT GMBH: 2020 (4 years ago)
- FUDING BROTHERS POWER CO.,LTD: 2010 (14 years ago)
- Adam Pumps S.p.A.: 2010 (14 years ago)
Company with a History
- ITT INC.: 1848 (176 years ago)
- Bosch Industriekessel GmbH: 1865 (159 years ago)
- SKF: 1907 (117 years ago)
Fuel Pump Manufacturers in United States
*Including some distributors, etc.
- CORNELL PUMP COMPANY
- ITT INC.
- Macnaught USA, Inc.
- Xylem Inc.
- KNEADER MACHINERY USA, LLC
- HK Surgical
- BLP Racing Products
- Vogel Manufacturin
- PowerTech Mobile Generators
- AEM Performance Electronics
- Derale.
- American Fleet, Inc.
- EDELBROCK, LLC.
- Motor Components, LLC
- AeroControlex
- GMB North America
- Aeromotive, Inc.
- Autobest
- Weldon Pump LLC
- Ashcraft Sand & Gravel
- BorgWarner Inc.
Global Distribution of Fuel Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
21 | 40.4% |
China
|
9 | 17.3% |
Italy
|
4 | 7.7% |
India
|
4 | 7.7% |
United Kingdom
|
3 | 5.8% |
Japan
|
2 | 3.8% |
Germany
|
1 | 1.9% |
Taiwan
|
1 | 1.9% |
Sweden
|
1 | 1.9% |
Hong Kong
|
1 | 1.9% |
Australia
|
1 | 1.9% |
Thailand
|
1 | 1.9% |
Canada
|
1 | 1.9% |
Slovenia
|
1 | 1.9% |
Spain
|
1 | 1.9% |
