All Categories
History
This section provides an overview for duct fans as well as their applications and principles. Also, please take a look at the list of 9 duct fan manufacturers and their company rankings. Here are the top-ranked duct fan companies as of February, 2026: 1.USA Ventilation Systems, 2.Pelonis Technologies, Inc., 3.ERF GROUP.
Table of Contents
Categories Related to Duct Fans
A duct fan is a type of blower used for exhausting smoke and hazardous gases in equipment ventilation exhaust ducts and onsite.
Among blowers, a rise in discharge pressure of 10 kPa or less is called a fan, while a rise in discharge pressure of 10 kPa to 100 kPa is called a blower.
The term duct in this case does not necessarily refer only to a fan used for the airflow and exhaust piping, but also to a fan with a flexible duct of discrete shape on the fan's airflow side.
Air conditioning and ventilation equipment used in various buildings such as offices, hotels, movie theaters, and factories are sometimes called line fans.
Duct fans are used to exhaust smoke, dust, noxious gases, paint odors, and heat generated on job sites and in factories, to ventilate underground or enclosed spaces for construction, etc.
In this case, instead of being installed and used at a specific location all the time, it is used in various locations with casters or a compact portable type.
Stationary Duct Fans are also sometimes used in greenhouses for vegetable cultivation, for example, as fans for photosynthesis accelerators that pump carbon dioxide gas into the greenhouse.
The following points should be considered when selecting Duct Fans:
It is necessary to check the following power supply specifications in the environment where the Duct Fans will be used, and select a suitable one.
Voltage: AC100, 110, 200, 220V
Number of phases: single phase, three phase
For explosion-proof zones, an explosion-proof type should be selected. Additionally, if the fan is operated by a control system, the nominal output, load current, starting current, consumption current, etc., are also necessary pieces of information for proper selection.
It is important to select the maximum airflow (flow rate with no obstruction at the fan suction and discharge ports) and the maximum static pressure (pressure generated when the fan suction or discharge ports are completely blocked) that are appropriate for the work and environment. Generally, characteristic graphs of airflow and static pressure as fan performance are available from the manufacturer in catalogs, etc., and should be utilized in the selection process.
The larger the outer diameter, the larger the overall dimensions, the heavier the weight, and the higher the air volume.
*Including some distributors, etc.
Sort by Features
Sort by Area
USA Ventilation Systems, founded in 1979, is a fan manufacturer based in Jacksonville, Florida. The company manufactures ventilation products and accessories for residential and commercial applications. Its product portfolio includes ceiling and cabinet fans, roof and wall fans, filtered supply fans, ventilators, and kitchen hoods. It has offices in Canada, Mexico, United States and serves markets including hotels and resorts, warehouses and distribution, mixed used buildings, restaurants, and assisted living and nursing homes.
Pelonis Technologies, Inc. was founded in the 1990s in Exton, Pennsylvania. Pelonis technologies is a manufacturer and distributor of air movement technologies and specialty heating products for commercial and industrial use. Pelonis Technologies is ISO 9000 and ISO 14000 certified. Pelonis Technologies has 3 main standard product segments in cooling, heating, and motors & motion control. Cooling products include fans, blowers, micro cooling, and automotive fans & blowers. Heating products include PTC heaters, temperature controllers, and immersion heaters. Motors & motion control include micro, planetary, AC, and medical micro motors. Custom solutions include AC and DC fans and blowers.
Sodeca is a fan, air curtains and extractor manufacturer based in the UK and was founded in 1983. The company offers ventilation solutions like hatch fans, duct fans, axial fans, and centrifugal fans, and accessories. These products are suitable for various applications, including smoke extractions, professional kitchens, roof-mounted fans, and other industrial applications. Also, the company offers a QuickFan Selector software that clients can use to find the most suitable ventilation system.
ERF Group, founded in Turkey in 2006, is a manufacturer of a wide variety of fans, pumps, and air-handling units. The company offers industrial fans including radial fans, roof fans, and duct fans. In addition, the company offers laser cutting and bending services and custom design for machinery production. It has branches all over Turkey, Tazmania, and Iraq and also has a 3000 m2 production department serving for the manufacture of fan and snail groups.
Sodeca, founded in the UK in 1983 is a manufacturer of fans, extractors, and accessories for a wide variety of applications. The company offers ventilation solutions such as hatch fans, duct fans, axial fans, and centrifugal fans. These products are suitable for various applications including smoke extractions, professional kitchens, roof-mounted fans, and other industrial applications. Also, the company has QuickFan Selector software that clients can use to find the most suitable ventilation system.
Polmak Co. Ltd., founded in 1994, is a manufacturer of ventilation machines based in Turkey. The company manufactures radial fans, duct fans, roof fans, mobile filtration systems, and custom-manufactured fans. The company owns a 3000 sqm factory with high-powered equipment and machines for speedy production and to ensure products are up to certain standards. It serves industries such as commercial and office buildings, industrial and manufacturing facilities, and healthcare and hospitals.
Airtècnics, founded in 1986 and headquartered in Castellar del Vallès, Barcelona, Spain, is operates as an air curtain manufacturer. The company design and produces a complete range of air curtains for all types of applications and installations, including energy efficient EC motors, direct expansion heat pump coils and multiple jets. It offers made-to-measure models, customised finishes and exclusive design solutions. Its product range also includes ventilation boxes, ventilation filters, axial and centrifugal fans, and OEM equipment. It distributes HVAC products, primarily sourced from companies within the Rosenberg Group.
Fantech Pty Ltd, an Australian company founded in 1973, and headquartered in Dandenong South, Victoria is a manufacturer of ventilation solutions, including fans, filters, and air movement equipment. Their products are designed for a range of industries, such as residential, commercial, industrial, and mining. The company is ISO9001:1002 and ISO9001:2015 accredited and its main products include inline fans, roof fans, wall fans, ceiling fans, and exhaust fans. They also provide various ventilation accessories, such as grilles, diffusers, and flexible ducting.
Venco, founded in 1992, is a manufacturer of exhaust fans and ventilation systems based in Turkey. The company's product portfolio includes ventilators, jet fans, exhaust fans, explosion-proof fans, and automatic control systems. Also, it offers solutions for car ventilation systems, staircase and lift pressurization systems, remote access and control systems, and efficient ventilation with AC fans. In 2019 VENCO and IMCO merged under the brand of VENCO and the company posseses ISO 9001:2015 Quality Management Systems Certificate.
Ranking as of February 2026
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | USA Ventilation Systems |
16.2%
|
| 2 | Pelonis Technologies, Inc. |
16.2%
|
| 3 | ERF GROUP |
13.3%
|
| 4 | POLMAK CO. LTD. |
12.4%
|
| 5 | VENCO |
11.4%
|
| 6 | Sodeca |
9.5%
|
| 7 | Airtècnics |
8.6%
|
| 8 | Rosenberg |
7.6%
|
| 9 | Fantech Pty Ltd |
4.8%
|
Derivation Method
The ranking is calculated based on the click share within the duct fan page as of February 2026. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
2 | 33.3% |
|
Turkey
|
2 | 33.3% |
|
Spain
|
1 | 16.7% |
|
Germany
|
1 | 16.7% |
104 products found
104 products
System Air Conditioning Co., Ltd.
350+ people viewing
Last viewed: 3 hours ago
■Features - Uniform temperature at any height from the floor to the ceiling of the indoor space. ・The number, capacity, and power consumption of a...
Nishimura Electric Co., Ltd.
320+ people viewing
Last viewed: 1 day ago
Turbo for high wind pressure, sirocco for large air volume. A state-of-the-art multi-stage blower that has both functions in a compact size. Featu...
6 models listed
Masaie Co., Ltd.
580+ people viewing
■ Features The pressure -changing ventilation fan has a structure that is less likely to receive air resistance from the outside, and the air is ap...
ZIEHL-ABEGG SE
370+ people viewing
Last viewed: 3 hours ago
■Summary Bees use honeycomb structures to store honey and raise their larvae. We aim to take advantage of the lightweight hexagonal design of ZApil...
Nippon Jukenkyo Co., Ltd.
880+ people viewing
Last viewed: 19 minutes ago
■ Clean air in all bathrooms 24 hours a day This is a third-class ventilation system with excellent maintainability. Since it is wall-mounted, clea...
ZIEHL-ABEGG SE
250+ people viewing
Last viewed: 10 hours ago
■Summary Ziehl-Abegg ventilation systems are innovative, individually adaptable and always highly efficient and reliable. As one of the world's lea...
Nishimura Electric Co., Ltd.
320+ people viewing
Last viewed: 2 hours ago
Nishimura's powerful trio of specially designed fans, spiral casings, and dedicated motors takes on the challenge of economical power consumption. ...
8 models listed
ZIEHL-ABEGG SE
300+ people viewing
Last viewed: 1 day ago
■Summary The newly developed fan not only surpasses the interior with its futuristic appearance, minimal and compact design, but also top-notch fan...
Nishimura Electric Co., Ltd.
290+ people viewing
Kaze Nishimura's high-performance blower/exhaust fan NB series boasts the highest wind pressure, air volume, and excellent durability. Features ■E...
5 models listed
Nippon Jukenkyo Co., Ltd.
390+ people viewing
Last viewed: 23 hours ago
■ Compact yet fully satisfies basic performance This is a type 3 ventilation system that is ideal for small homes of about 100 square meters, apart...
ZIEHL-ABEGG SE
290+ people viewing
■Summary Ziehl-Abegg develops individual and customized fan solutions for very different industries and applications. Air conditioning, ceramics, c...
Hakko Electric Co., Ltd.
360+ people viewing
Last viewed: 3 hours ago
■Features Drying heater unit with fan (pressure ventilation fan) ■Applications Air heating heater/drying heater ■Type Three phase 200V caveat ■W...
Nishimura Electric Co., Ltd.
320+ people viewing
Last viewed: 12 hours ago
Bringing together the best of fluid mechanics. Sirocco fan series with 2-pole motor direct connection type and high air blowing efficiency Feature...
6 models listed
ZIEHL-ABEGG SE
320+ people viewing
Last viewed: 18 hours ago
■Summary ZAsilo combines years of agricultural expertise with German quality. The result is a 30% energy savings compared to a 2-pole AC standard f...
Nippon Jukenkyo Co., Ltd.
340+ people viewing
Last viewed: 16 hours ago
■Maintain stable ventilation volume with powerful fan and easy maintenance "Luflo 400 (LFG-400DC-V)" is a floor-mounted type 3 ventilation system t...
ZIEHL-ABEGG SE
280+ people viewing
Last viewed: 1 day ago
■Summary Ziehl-Abegg clutch-driven fans can be made from a variety of materials, from mild steel to stainless steel. Support plates or troughs are ...
Hakko Electric Co., Ltd.
550+ people viewing
Last viewed: 20 hours ago
■Features The drying heater unit (duct heater) is equipped with a fan (pressure ventilation fan). You can easily send hot air by attaching it to a ...
ZIEHL-ABEGG SE
320+ people viewing
Last viewed: 1 day ago
■Summary Square, flexible, high efficiency. That is the new fan system ZAcube. In just a few steps, you can now easily install high-efficiency fan ...
Nippon Jukenkyo Co., Ltd.
680+ people viewing
Last viewed: 1 day ago
■Maintain stable ventilation volume with powerful fan and easy maintenance "Luflo 400 (LFB-400DC-V)" is a ceiling-concealed type 3 ventilation syst...
ZIEHL-ABEGG SE
280+ people viewing
■Summary ZIEHL-ABEGG's process air fans are used in industrial machines and production systems in a variety of industries for tasks of great respon...
ZIEHL-ABEGG SE
270+ people viewing
■Summary When you purchase a product from Ziehl-Abegg, you are choosing the highest level of quality. All our products pass tests before they are s...
Nishimura Electric Co., Ltd.
380+ people viewing
Last viewed: 10 hours ago
Smaller and lighter, stronger and quieter. Achieved small size and high performance. Features ■Strong performance The uniquely designed dedicated ...
7 models listed
ZIEHL-ABEGG SE
360+ people viewing
Last viewed: 14 hours ago
■Summary Zeel-Abegg fans meet the highest quality requirements for all applications. This means that R type EC centrifugal fans are perfectly suite...
ZIEHL-ABEGG SE
410+ people viewing
Last viewed: 1 day ago
■Summary Air is always around us, but we are rarely conscious of it. Zeal Abegg's ability is to transform the air of natural resources into the des...
ZIEHL-ABEGG SE
320+ people viewing
Last viewed: 1 day ago
■Summary All standard series and customized solutions according to customer requirements are equipped with design programs and energy-optimized mot...
ZIEHL-ABEGG SE
300+ people viewing
Last viewed: 23 hours ago
■Summary Ziehl-Abegg fans offer the highest efficiency and highest reliability for all applications. Featuring individually configurable, upgradeab...
ZIEHL-ABEGG SE
310+ people viewing
■Summary Many times certified, Ziehl-Abegg process air fans are manufactured from painted sheet steel or stainless steel. Their functionality is en...
Nippon Jukenkyo Co., Ltd.
400+ people viewing
Last viewed: 1 day ago
■ Promptly move contaminated air generated in daily life outdoors A pipe fan for local ventilation for small houses. Exhausts dirty air from living...
ZIEHL-ABEGG SE
350+ people viewing
Last viewed: 1 day ago
■Summary Demand for high-end air handling units equipped with cutting-edge technology is increasing worldwide to maximize system efficiency. The in...
