1. Metoree
  2. Nozzles
  3. Spray Nozzles
Description 68 Manufacturers 11 Products
Zhuzhou Old Craftsman Precision Alloy Co., Ltd.
WAMGROUP Corporate
VORTEC
Valco Melton
Vaishnavi Metal Products Corporation Pvt.
Tyco Fire Protection Products
Synergy Spray Systems
Swedex GmbH
Steinen
Spraytech Systems Pvt. Ltd.
SPRAYNOZ TECHNOLOGIES PVT. LTD.
Spraying Systems Co.

68 Spray Nozzle Manufacturers in 2024

This section provides an overview for spray nozzles as well as their applications and principles. Also, please take a look at the list of 68 spray nozzle manufacturers and their company rankings. Here are the top-ranked spray nozzle companies as of November, 2024: 1.Valco Melton, 2.BETE, 3.Nordson Corporation.

Table of Contents

What Is a Spray Nozzle?

Spray Nozzles

A spray nozzle is a device that sprays out a liquid or gas at once by specifying the direction in which the liquid or gas is to flow.

Spray nozzles can be used not only to eject liquids but also to eject gases and are called air nozzles. On the other hand, there are two types of spray nozzles for liquids: one-fluid nozzles and two-fluid nozzles.

One-fluid nozzles are spray nozzles that use only the pressure applied to the liquid to eject the liquid, while two-fluid nozzles are spray nozzles that use a mixture of liquid and compressed air to pulverize the liquid and eject it.

Uses of Spray Nozzles

Spray nozzles are used in a variety of industrial, industrial, and household applications, as they refer to all devices that eject liquids or gases according to the desired spray pattern. The most familiar product that uses a spray nozzle is a "mist sprayer."

Other functions include humidifying liquids by turning them into fine particles and diffusing them, and applying liquids evenly. Spray nozzles for gases, on the other hand, can be used to spray air at the desired pressure, so they can be used to spray bacteria and invisible debris with an air shower, or to blow off or cool scraps from cutting.

Principle of Spray Nozzles

Figure 1. Comparison of one- and two-fluid nozzles

Figure 1. Comparison of one- and two-fluid nozzles

1. 1-Fluid Nozzle

The one-fluid nozzle lifts the liquid up to the spray nozzle by applying pressure to the liquid. Another major advantage of this system is that it does not require a compressor, and can be easily used as long as a liquid supply facility is available.

Therefore, if you want to change the spray trajectory according to the situation, a one-fluid nozzle is recommended. However, it also has the disadvantage of not being able to apply a small amount of liquid because of the high pressure required for it to function as a spray nozzle.

2. 2-Fluid Nozzle

Two-fluid nozzles use not only pressure but also the force of air currents to eject liquid, enabling atomization of liquid at a lower pressure than with one-fluid nozzles. In addition, a wide range of liquid jet flow rates can be achieved.

Therefore, a two-fluid nozzle is better suited for jetting liquid at low pressure or for producing finer particles from the jet. However, compressed air is required in addition to the liquid pump, so a compressor and other equipment must also be provided.

Another disadvantage is that the nozzle also has a complex structure, making it more costly.

How to Select a Spray Nozzle

When selecting a spray nozzle, it is important to confirm the following points:

1. Confirmation of Equipment

First, before selecting a spray nozzle, check the specifications of the equipment. The pressure and flow rate that can be supplied to the spray nozzle are determined by the performance of the pump that pumps the liquid, the diameter and length of the piping, and the pressure of the compressed air.

It is also necessary to confirm whether there is enough space for the spray nozzle to be installed, and whether the spray nozzle will fit into the equipment. In addition, it is also necessary to check how far away the spray nozzle can be from the object to be applied.

2. Confirmation of the Environment

Next, check the operating environment. It is necessary to check the strength, heat resistance, and materials that will not wear out due to the ambient temperature, viscosity and surface tension of the liquid to be used, and internal pressure.

In addition, if the liquid contains solids or other substances, or if the temperature is high, the spray nozzle may become clogged. Knowing the size of the solid content may make it possible to select a spray nozzle that takes into account the minimum passage diameter inside the spray nozzle.

3. Determination of Spray Nozzle Specifications

Figure 2. Spray nozzle pattern shape

Figure 2. Spray nozzle pattern shape

In order to achieve the objective, confirm what pattern of application is needed, how much flow rate is required, how wide a range of discharge is needed, and how much variation in application volume can be tolerated.

Spray pattern shapes include flat, full cone, holocone, straight, and curtain. Refer to the spray nozzle catalog and select the appropriate nozzle for the spray pattern.

Other Information on Spray Nozzles

Spray Nozzle Application Properties

Figure 3. Change in application properties of spray nozzle

Figure 3. Change in application properties of spray nozzle

After determining the type of spray nozzle, check the flow rate and angle at a given pressure. It is important to note that there are differences in the change in spray angle and other characteristics when the pressure is changed according to each pattern.

In general, the higher the injection pressure, the wider the spray angle. However, for full-cone nozzles and other nozzles containing cores, the angle may widen up to a certain pressure, and narrow at higher pressures.

List of 68 Spray Nozzle Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Australia
  • Belgium
  • Canada
  • China
  • Czech
  • France
  • Germany
  • India
  • Italy
  • Japan
  • Romania
  • Spain
  • Sweden
  • Switzerland
  • Taiwan
  • United Kingdom
    • BETE
      • United States of America Address: 50 Greenfield Street, Greenfield, Massachusetts, United States of America

      Manufacturer Overview

      BETE, based in the USA, is a manufacturer of spray nozzles and systems since 1950. The company offers a comprehensive range of products including flat fan nozzles, hollow cone nozzles, whirl nozzles, air atomizing nozzles, tank washing nozzles, specialty nozzles, and more. The company offers additional nozzle types and configurations tailored to specific industrial needs. Each type of nozzle is designed to address specific spraying requirements, providing efficient performance in various applications. The company serves various industries including chemical processing, energy, fire protection, food & beverage processing, mining, and more.

    • Fusion Inc.
      • United States of America Address: 4658 East 355th Street, Willoughby, Ohio, United States of America

      Manufacturer Overview

      Fusion Inc., founded in 1933 and headquartered in Willoughby, Ohio, is a manufacturer of brazing and soldering automation solutions. The company supplies brazing and soldering paste and powder to various markets across Western, Central, and Eastern Europe, as well as countries in Africa and the Middle East. These products are vital in the manufacturing and fabrication industries, enabling bonding of different materials, creating durable joints across a wide range of applications. The company conducts feasibility testing for new applications, ensuring the quality of its manufacturing solutions.

    • Valco Melton
      • United States of America Address: 497 Circle Freeway Drive Suite 490, Cincinnati, Ohio, United States of America

      Manufacturer Overview

      Valco Melton, established in 1952 and based in Cincinnati, Ohio, USA, is a manufacturer and supplier of adhesive dispensing and quality inspection equipment. The company's product range includes cold glue systems, hot melt dispensing systems, pattern controls and electronics, vision and quality assurance systems, and central adhesive supply | pot filling systems. These products are utilized in different applications, from simple hand-operated gluers to advanced camera inspection systems. They serve industries such as automotive, bag and sack manufacturing, and corrugated boxes. The company offers services including machinery manufacturing, design, and integration of precision metering, and mixing.

    • Vaishnavi Metal Products Corporation Pvt.
      • United States of America Address: 1381 N Hundley Street,Anaheim, California, United States of America

      Manufacturer Overview

      Vaishnavi Metal Products Corporation Pvt. Ltd (US) is a manufacturer of brass and copper industrial components that was established in 2018 in Anaheim, California. The company produces a wide range of brass and copper components including cable glands, fasteners, battery terminals, fittings, and EDM wires. It also offers contract manufacturing and OEM services for customers with unique project specifications. The company’s products are used by clients in various industries including consumer electronics, automotives, telecommunications, and power generation.

    • Nordson Corporation
      • United States of America Address: 28601 Clemens Road, Westlake, Ohio, United States of America

      Manufacturer Overview

      Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.

    • Spraying Systems Co.
      • United States of America Address: 200 West North Avenue, Glendale Heights, Illinois, United States of America

      Manufacturer Overview

      Spraying Systems Co., established in 1937 and headquartered in Wheaton, Illinois, USA, is a manufacturer of spray nozzles and systems. Its product range encompasses hydraulic spray nozzles, air atomizing nozzles, tank cleaning equipment, spray guns, and automated spray systems. These products find applications across more than 200 industries, serving functions such as cleaning, coating, cooling, drying, and lubricating. The company has garnered certifications for quality and sustainability, including ISO 9001:2008, ISO 14001:2004, and compliance with the ASME Boiler and Pressure Vessel Code.

    • BETE Fog Nozzle, Inc.
      • United States of America Address: 50 Greenfield St, Greenfield, Massachusetts, United States of America

      Manufacturer Overview

      BETE Fog Nozzle, Inc. was established in 1950 and is based in Greenfield, Massachusetts, USA, as a manufacturer of spray nozzles, spray injectors, tank washers, and spray systems. The product portfolio of the company comprises XA nozzle systems, SpiralAir SA twin-fluid nozzles, FlexFlow spray systems, and HydroWhirl Orbitor. The products and solutions cater to various industrial needs, including water purification, cooling systems, corrosion prevention, efficient coating, and air pollution control. The company serves various industries, such as food and beverage processing, chemical processing, energy, and pollution control.

    • Pneumax Automation LLC
      • United States of America Address: 128 Durkee Lane Dallas, North Carolina, United States of America

      Company Overview

      Pneumax Automation LLC is a manufacturer and distributor of pneumatic as well as electrical systems and components for process actuation. Established in 2019 and based in Dallas, North Carolina, the company is a subsidiary of Pneumax Holding S.p.A, serving clients in industrial and process automation. The company produces various standard and solenoid valves including poppet and booster models, valve islands for integrating multiple flow control systems, and standard and microcylinders for converting compressed air into linear motion. Pneumax Automation LLC also offers a range of clamping units, fittings, and other accessories.

    • Durr Systems, Inc.

      • Durr Systems, Inc.
        Nozzles

      • United States of America Address: 26801 Northwestern Highway Southfield, Michigan, United States of America

      Company Overview

      Dürr Systems, Inc., established in 1896, and headquartered in Southfield, Michigan, is a manufacturer, distributor, and supplier of Industrial Automation and Finishing Systems. Specializing in paint and final assembly systems, application technology, and clean technology systems, Dürr caters to diverse industries such as automotive, aerospace, energy, chemical, and pharmaceutical. The company also offers application technology products for the general industry, such as paint application, gluing, and seam sealing technology. Their solutions helps to improve the efficiency and environmental performance of industrial processes.

    • VORTEC
      • United States of America Address: 10125 Carver Road, Cincinnati, Ohio, United States of America

      Company Overview

      Vortec, was established in 1961, is a manufacturing company providing expertly designed compressed air solutions that improve efficiency and increase productivity based in the United States. The company became the first company to develop technology for converting the vortex tube phenomenon into practical, effective industrial cooling solutions. It has been continued to refine and expand vortex tube applications, as well as develop air amplification products for more efficient use of compressed air in cleaning and conveying applications. In 1990, it was purchased by Illinois Tool Works; and is now part of the ITW Air Management business unit.

    • Armaturenwerk Hötensleben GmbH
      • Germany Address: Schulstr. 5 - 6 39393 Hötensleben, Germany

      Manufacturer Overview

      Armaturenwerk Hötensleben GmbH, established in 1992 and based in Völpke, Germany, is a manufacturer of stainless-steel components. The company produces products such as fittings, strainers, sight glasses, pipes &assembly accessories, and tank equipment and supplies to food, cosmetics, chemical, and pharmaceutical industries. The products of this company are manufactured using manufacturing technologies in the area of cleaning technology, valve technology, and pigging technology and abides by ISO 9001:2015 standards. The company has offices in the USA, Netherlands and Belgium.

    • Swedex GmbH
      • Germany Address: Im Taubental 10, Neussy, Germany

      Manufacturer Overview

      Swedex GmbH, established in 1979 and based in Neuss, Germany, is a manufacturer of advanced industrial products. The company product line comprises abrasives, safety equipment, electrostatic tools, precision cutting tools, and tools for diverse industrial purposes. The ISO 9001 company provides a range of safety devices to improve workplace security and lower the risk of accidents and injuries. The goods are used in the manufacturing, construction, automotive, and metalworking sectors. The company’s active components meet OSHA's strict safety laws and the EU Machinery Directive's noise control requirements.

    • WAMGROUP Corporate
      • Italy Address: Via Cavour 338 Ponte Motta/Cavezzo, Modena, Italy

      Manufacturer Overview

      Cavezzo, Modena, WAMGROUP Corporate, established in 1968, is an Italian manufacturer headquartered in Ponte Motta, specializing in bulk solid handling and processing equipment. WAMGROUP offers a range of products, including screw conveyors, mechanical conveyors, conveyor feeders, rotary feeders, and flow intercepting valves. They also provide equipment for jobsite operations, wastewater treatment, farming and biogas processes, as well as energy generation. These products find applications in various industries, such as aggregate reclaiming from truck mixers and concrete pumps in concrete plants, bulk solid conveying, loading and discharging operations, as well as level and pressure monitoring, utilizing the Silo Protection System (SPS).

    • SAMOA Industrial, S.A.
      • Spain Address: Pol. Ind. Porceyo, I-14 Camino del Fontán, 831 33392 Gijón, Asturias, Spain

      Manufacturer Overview

      Samoa Industrial, S.A., established in 1958 and headquartered in Asturias, Spain, manufacturer that develops products for fluid handling and management during the maintenance of vehicles, infrastructures, and industrial machinery. The company's product line includes pneumatic piston pumps, manually operated pumps, battery grease guns, used fluid equipment, meters, and more. It also offers kits and packages that include electric pumps, outlet and suction hoses, delivery guns, and suction accessories. Its lever-action grease pumps have a cast iron head for maximum durability. It serves industries such as automotive, construction, agriculture, mining, and more.

    • Zhuzhou Old Craftsman Precision Alloy Co., Ltd.
      • China Address: No.475, Jinshan Road, Hetang District, Zhuzhou, Hunan, China

      Manufacturer Overview

      Zhuzhou Old Craftsman Precision Alloy Co., Ltd., established in 2007 and headquartered in Hunan, China, is a manufacturer of tungsten carbide products. The company offers a wide range of products, including carbide rods, carbide strips, carbide plates, carbide saw tips, and more. It also provides carbide mining tools, carbide cutting inserts, and carbide buttons. Its products are hip sintered, high hardness, and high wear resistance. Furthermore, the company has received ISO 9001 certification. It serves several industries such as automotive, aerospace, electronics, energy, mining, and more.

      • TÉCNICAS E INGENIERÍA DE PROTECCIÓN, SAU
        VIPER Nozzles

      • Spain Address: Av. de Barcelona, 20 08970 Sant Joan Despí Barcelona, Spain

      Manufacturer Overview

      TÉCNICAS E INGENIERÍA DE PROTECCIÓN, SAU, founded in 1953 and based in Barcelona, Spain, is a manufacturer of lay-flat hoses and fire equipment. The company manufactures lay-flat hoses and fire equipment like firefighting nozzles for different industries, such as firefighting & emergency, agriculture and water wells. Additionally, it also offers a wide range of couplings and hose related accessories. Its product portfolio includes brands like ARMTEX and BLINDEX in the hose range, and VIPER in the fire nozzle range.

    • Eckardt Systems GmbH
      • Germany Address: Westliche Gewerbestr. 2 75015 Bretten, Germany

      Manufacturer Overview

      Eckardt Systems GmbH, established in 1992 and headquartered in Bretten, Germany, is a manufacturer of lubrication and cleaning systems for various industries, including metalworking and automotive. The company offers various products, including roller lubricators, spray systems, and oil mist separators, catering primarily to the metalworking industry. It also provides roller-applied lubrication, cleaning systems, and corrosion protection. Its systems serve automotive suppliers to small-scale metal punching services. The company ensures that solutions for lubrication, preserving, and cleaning effectively meet each customer's unique requirements.

    • Power Wash Italiana srl

      • Power Wash Italiana srl
        Nozzle

      • Italy Address: Via Moretto, 14 - 25018 Montichiari, Italy

      Manufacturer Overview

      Power Wash Italiana srl, based in Guidizzolo, Italy, is a manufacturer of high pressure washers and accessories. The company designs and manufactures hot water and cold water high pressure washers, as well as boilers-hot boxes and special washing machines. It also provides various accessories for washing machines, such as nozzles, guns and hoses. The special machines come in different pressures and flow rates, united by the methods of construction and the components.

    • Lechler GmbH
      • Germany Address: Ulmer Strasse 128 Metzingen, Germany

      Manufacturer Overview

      Lechler, founded in Germany in 1879, is a manufacturer of nozzle and atomization technology. The company's product portfolio includes pneumatic atomizing nozzles, hollow cone nozzles, full cone nozzles, flat fan nozzles, and solid stream. Its products are used in a wide variety of industries and applications including food and beverage, pharmaceutical, chemical and process engineering, steel and aluminum, and cement. The company operates in countries including the USA, the Uka, Malaysia, and Europe.

    • hewitech GmbH & Co.KG

      • hewitech GmbH & Co.KG
        NOZZLE

      • Germany Address: Am Langenhorster Bahnhof 16 D-48607 Ochtrup, Germany

      Manufacturer Overview

      Hewitech GmbH & Co. KG, established in 1993 and headquartered in Ochtrup, North Rhine-Westphalia, Germany, is a manufacturer of plastic installations for cooling towers and wastewater systems. Apart from cooling towers and wastewater systems, the company also produces PP, PVC, and fluoropolymer plastic performance components. These products are also used in humidification systems, special applications in mass transfer for the purpose of gas purification, and bio-trickling filters for a reduction in odor emissions. The company's services include the free use of its design software, support in the design and selection of cooling tower fills, and the re-design of custom-made plastic fills.

    • EUROSPRAY SPRAY AND FILTER TECHNOLOGY, S.L.
      • Spain Address: C/ Fructuós Gelabert 2-4. 8º 4ªA · Edificio Conata Sant Joan Despí Barcelona, Catalunya, Spain

      Manufacturer Overview

      Eurospray Spray and Filter Technology S.L., established in 2008 and headquartered in Sant Joan de Despi, Catalonia, Spain, is a spray nozzles and accessories manufacturer and distributor. The company's products include hollow and full-cone hydraulic nozzles, paper mill nozzles and spraying pipes, and electro-pneumatic atomizers. It also offers complete disinfection and sanitizing misting systems and humidification systems. These products are used in firefighting systems, painting systems, and car washes, among various other applications. The company has a global sales network, and its official distributor for North America is Uni-Spray Systems Inc., Waterloo, Ontario, Canada.

    • POK
      • France Address: 18 Cr Antoine Lavoisier, 10400 Nogent-sur-Seine, France

      Manufacturer Overview

      POK is a manufacturer of firefighting equipment founded in 1976 and based in Nogent-sur-Seine, France. The company's products include foam premixing eductors, hand nozzles, hose reels, valves, and manual monitors. These have applications in firefighting as well as in industrial facilities working with volatile substances. Aside from its products, the company also offers engineering, customization, personnel training, and maintenance services for customers needing additional assistance. Its clients include the French Air Force and Armed Forces, as well as local airports, fire brigades, nuclear facilities, and fire truck manufacturers.

    • CKD
      • Japan Address: 250, Ouji 2-chome, Komaki, Aichi, Japan

      Manufacturer Overview

      CKD Corporation, established in 1943 under the name of Japan Aircraft Electric Co., Ltd., is a Japanese manufacturer of automation machinery and manufacturing components, headquartered in Komaki, Aichi. Their diverse portfolio includes pneumatic and fluid control components, fine system components, drive components, and labor-saving components. The company has also developed various types of automation machinery, such as transparent object inspection systems, pharmaceutical products packaging machines, and more. These products find applications in various industries, for example their automated food packaging systems are designed for maintaining food quality and hygienic conditions. Their fluid control components are used in the solar cell manufacturing process.

    • Dr. JESSBERGER GmbH

      • Dr. JESSBERGER GmbH
        Nozzle

      • Germany Address: Jaegerweg 5-7D- Ottobrunn near Munich, Germany

      Manufacturer Overview

      Dr. JESSBERGER GmbH, founded in 2003, is a manufacturer of drum and container pumps, eccentric screw pumps, located in Munich, Germany. The company offers a wide range of pumps for transferring different media, including thin or viscous, neutral or aggressive, flammable or non-flammable, with or without solids, fibers or gas components. In addition to drum pumps for low-viscosity and medium-viscosity media up to 1000 mPas, it also offers a complete range of eccentric screw pumps for pumping highly viscous, still flowable media. Qualified partners in Germany, Europe and all over the world, guarantee a nearly optimized customer support.

      • Cleaning-Spray Intelligent Equipment Technology GuangZhou Co.,Ltd.
        Mist spray nozzle

      • China Address: No.168,2nd Industrial Zone,Xia village 5th Community,Jia He Street,Baiyun District,Guangzhou, Guangdong, China

      Manufacturer Overview

      Keliying Intelligent Equipment Technology (GuangZhou) Co. Ltd., established in 2010 and headquartered in Guangzhou, China, is a manufacturer of tank cleaning and tank washing equipment and systems. The company produces tank cleaning machines, reaction drives, and a wide range of spray nozzles. Its spray nozzles include retractable and rotating spray balls and rotary spray nozzles, as well as high-impact 3D tank cleaning nozzles. The company's services include custom tank cleaning equipment design and manufacture, and spare parts supply.

    • A.S. Exclusiv
      • Germany Address: Gabelsbergerstr. 31 D-50674 Köln, Germany

      Manufacturer Overview

      A.S. Exclusiv, established in 1985 and headquartered in Cologne, Germany, is a manufacturer and distributor of adhesive application equipment and hot melt adhesives. The company's product portfolio includes hot glue guns, tank glue guns without compressed air, and compressed air tank glue guns. It also produces glue cartridges, accessories, and a range of adhesives. The company serves original equipment manufacturers and private label manufacturers, as well as accepting wholesale orders, and has an online store for small-scale orders.

    • Adam Pumps S.p.A.
      • Italy Address: Via della Resistenza 46/48 41011 Campogalliano, Italy

      Manufacturer Overview

      Adam Pumps S.p.A. was founded in 2010 and is headquartered in Campogalliano, Italy is a manufacturer of pumps and meters for gasoline. The company offers an array of products including oil flow display meters, diesel fuel transfer pumps, and transfer kits for transporting urea. These products find applications in waste and management plants, petrochemical industries, and oil and gas refineries. Its philosophy is to ensure continuous improvement of the products, and fast response to the customer’s requirements.

    • Plansee Japan Ltd.
      • Japan Address: Ark Hills Sengokuyama Mori Tower, 1-9-10 Roppongi, Minato-ku, Tokyo, Japan

      Manufacturer Overview

      Plansee Japan Ltd., set up in 2009 in Japan, is a manufacturer of advanced metal components from molybdenum and tungsten for electrical, medical, and industrial uses. The company was formed with the amalgamation of Nippon Plansee, Japan Vacs Metal, and Japan Vacs Precision, although the parent organization started in 1921. Products include temperature-resistant metals such as molybdenum, tungsten, and tantalum for semiconductors, furnace construction, and the electrical industry. The product categories comprise X-ray components, cooling inserts for molds, evaporation coils and dimming caps. They are used in applications like thermal management and rocket propulsion systems for resilience, performance, and robustness.

    • HD Fire Protect Pvt. Ltd
      • India Address: D-6/2, Road No. 34, Wagle Estate, Thane, India

      Manufacturer Overview

      HD Fire Protect Pvt. Ltd, established in 1983 and headquartered in Maharashtra, India, is a manufacturer of firefighting equipment and systems that specializes in water and foam-based products. The company offers a wide range of products, including monitors, foam systems, firefighting skids, and more. It also offers tank protection systems, including foam chambers, rim seal foam pourers, and other related components. Its foam systems are designed to suppress and extinguish flammable liquid fires. The company has achieved the CRISIL MSE*1 rating by CRISIL. It serves industries such as machinery manufacturing, building materials, and fire protection.

    • CALDOR INDUSTRIAL HEATING SYSTEMS SRL
      • Address: Sfântu Gheorghe Street, Nr20, L27, F7 Ilfov County, Pantelimon,, Romania

      Manufacturer Overview

      CALDOR INDUSTRIAL HEATING SYSTEMS SRL is a Romanian ISO 9001 certified electrical heating products manufacturer that was established in 2014 in Pantelimon, Ilfov. The company primarily produces cartridge heaters for heating solids, electric resistance heaters for heating liquids, and tubular heaters for heating surfaces. It also offers band heaters for heating cylindrical objects such as drums or nozzles. The company’s products are used mainly by its clients in the automotive, metalworking, and plastics industries, including companies such as Bosch and Airbus.

    • DropsA S.p.A.
      • Italy Address: Via Benedetto Croce, 1 Vimodrone, Italy

      Manufacturer Overview

      DropsA S.p.A., headquartered in Milan, Italy, has been a centralized lubrication system manufacturer since 1946. The company offers a range of products, including automatic and manual pumps, dual-line and progressive dividers, control devices, and auxiliary components. These products are designed for various types of lubrication, such as grease, oil, and air/oil, aimed at improving the efficiency of various industrial production systems while reducing maintenance costs. These are utilized across diverse industries, including mining, construction, railways, textiles, and energy.

    • Hyperion Materials & Technologies
      • Sweden Address: Västbergavägen 32,SE-126 30 Hägersten, Stockholm, Sweden

      Manufacturer Overview

      Hyperion Materials & Technologies, established in 2018, in Worthington, Ohio is a manufacturer of advanced materials, including tungsten carbide powder, cemented carbide, and industrial diamond. The company specializes in developing advanced hard and superhard materials for various industries through carbide recycling and various sustainability measures. Its products include cutting tools, wear-resistant components, carbide rods, forming tools, and precision optics. These offerings deliver enhanced durability, performance, and efficiency, catering to sectors such as aerospace, automotive, electronics, and industrial manufacturing. Its unique products drive progress across applications demanding optimal-performance materials.

      • China Address: No.17 -1, Fengshun Road, Tongle, Longgang District, Shenzhen City, Guangdong, China

      Manufacturer Overview

      Winan Industrial Limited is a Chinese manufacturer of firefighting equipment established in 1995 and based in Shenzhen city, Guangdong. The company's products include automated fire monitors, foam bladder tanks, hoses, specialized valves, and foam inductors. It also offers complete fire suits and consumables, such as foam concentrate, automatic fire extinguisher balls, and conventional fire extinguishers. The company's products are chiefly used in Chinese petrochemical facilities, airports, marine ports, and power distribution locations.

    • Düsen-Schlick GmbH
      • Germany Address: Hutstraße 4 96253 Untersiemau/Coburg, Germany

      Manufacturer Overview

      Düsen-Schlick GmbH, founded in 1902 and based in Coburg, Germany, is a manufacturer of nozzles and nozzle systems. The company develops and produces nozzles and system solutions for production processes that utilise spray technology. It also provides consultation, custom engineering and testing facilities. Its products are particularly used in manufacturing, pharmaceutical and food technology sectors. The company's quality management system is DIN ISO 9001 certified, along with many other certifications including IIW and EOTC welding certificate.

    • Synergy Spray Systems
      • India Address: 103, Tass Industrial Estate, Sidco Industrial Estate, Ambattur, Chennai, Tamil Nadu, India

      Manufacturer Overview

      Synergy Spray Systems, established in 2004 and headquartered in Chennai, India, is a manufacturer of spray nozzles and spray engineering solutions. The company's products include air atomizing, wind jets, and mist nozzles for industrial, agricultural, and commercial applications. It also offers misting systems, dust suppression systems, and paddle wheel aerators. Its air-atomizing nozzles are used for fine misting in cooling and humidification applications, and flat fan nozzles are used for uniform spraying in surface coating and cleaning processes. The company's solutions include dust suppression, wastewater mist evaporators, and solar panel cleaning systems. Its clientele spans machine fabrication, chemical processing, and hospitality sectors.

    • MAFCO ENTERPRISE CO.,LTD.
      • Taiwan Address: No.79, Zhengying 13th St., Shalu Dist., Taichung City, Taiwan, Taiwan

      Manufacturer Overview

      Mafco Enterprise CO., LTD. is a manufacturer of fire fighting equipment and emergency response products located in Taichung Taiwan and established in The company’s product portfolio includes hydrant valves, hose nozzles, alarm check valves, fire vehicle equipment, hose couplings, and their accessories such as PF adapters, spanners, gaskets & packings, suction caps & plugs, and claws & claw bases. The company is ISO 9001 certified and offers UL and Bsi-approved fire and safety products for different industries, including marine, fire fighting vehicles, and construction.

    • Mistec nozzles
      • China Address: Juqi Road, Humen Town, Dongguan City, Guangdong Province, China

      Manufacturer Overview

      Mistec Nozzles, established in 2017 and headquartered in Dongguan, China, is a manufacturer of spray technology products. The company's products include full cone, hollow cone, and air atomizing nozzles made from brass, ceramic, and plastics. Its test equipment includes spectrographs, particle size testers, and hardness testers. Its flat fan and full cone nozzles are used for cleaning and coating processes in paper and pulp mills. The company also specializes in high-pressure washing nozzles for intense cleaning tasks and misting nozzles for humidification in the food and beverage industries. Its solutions are used in steel, environment protection, and firefighting industries.

    • DWK Life Sciences

      Manufacturer Overview

      DWK Life Sciences Gmbh, founded in 1887, is a German multinational manufacturer and supplier, based in Wertheim, Baden-Württemberg, specializing in glass and plastic primary packaging. The company produces container closure systems (CCSs), tailored for pharmaceutical, biotechnology, diagnostic, and personal care applications. These include laboratory bottles, equipment and tools, as well as chemistry and volumetric glassware. The company also offers measuring tools, along with other products such as beakers and flasks, caps and closures, containers and vessels, funnels and tubes, as well as microplates and vials. These products find applications across various research domains, such as analytical sciences, cell culture, and organic chemistry.

    • Manufacturer Overview

      Junty Ltd., established in 2000 and headquartered in Beijing, China, is an after-market mechanical seals and wear parts manufacturer and supplier. The company's products comprise two lines: engineered mechanical seal parts, including seal rings, pump bushings, and rubber components; and wear parts, such as rotors, balls, and rotary unions, using various materials, including silicon carbide, stainless steel, and PTFE, for motion and control applications in the fluid and gas industries world-wide. Junty Inc. was established in the United States in 2012 to provide sales, service, and warehousing for the North American market.

    • Lockwood Products, Inc.

      • Lockwood Products, Inc.
        NOZZLES

      Manufacturer Overview

      Lockwood Products, Inc., founded in 1981 and headquartered in Lake Oswego, Oregon, is a manufacturer of unique fluid power and motion control products. The company offers a diverse range of products, including modular hose systems, quick-connect fittings, and flow control valves. The products are designed to provide flexibility, allowing users to create customized fluid handling systems for various applications. These solutions are particularly beneficial for industries requiring fluid transportation, such as automotive, manufacturing, and healthcare, delivering optimal-quality components that enhance fluid power efficiency and productivity. The products are FDA, REACH, RoHS, and SVHCs compliant, and exports globally.

    • Tyco Fire Protection Products

      • Tyco Fire Protection Products
        Nozzles

      Manufacturer Overview

      Tyco Fire Protection Products, based in Landsdale, Pennsylvania, serves as a manufacturer and supplier of diverse fire suppression systems for various applications spanning commercial, industrial, and residential sectors. Its product line encompasses extinguishing agents, sprinkler systems, and valves. The company also offers piping products, firefighting equipment, and services. Its water-based fire products range from automatic sprinklers, system valves, to electrical devices. Its global technology portfolio comprises several brands, including TYCO, ANSUL, and GRINNELL.

    • Kramp Groep

      Manufacturer Overview

      Kramp Groep, established in 1951 and located in Gelderland, Netherlands, is a manufacturer that specializes in spare parts and accessories for the agricultural industry. The company offers a range of products, including spare parts for agriculture, forest and grass care, earthmoving, and road construction. It also offers batteries and accessories. Its product increases nerve-muscle communication, lifts energy levels, and reloads with electrolytes as well as up to 84 trace minerals. It serves a diverse range of industries, including agriculture, landscaping, forestry, civil engineering, and mechanical engineering.

    • Manufacturer Overview

      BLASBERG GmbH, started in 1900 and based in Velbert, Germany, is a manufacturer of products used in the adhesive technology, mining, and industrial hydraulics fields. Its product portfolio includes pumps, valves, and nozzles, and its main control units are manufactured according to customer requirements and are equipped with 3/2-way valve cartridges. The company also sells hydraulic control units, check valves, and spare parts for hydraulic controls, such as plug-in filters. The company carries out in-house development and production, and some of its capabilities include CNC turning, milling, and surface grinding.

    • Lee Company

      Manufacturer Overview

      The Lee Company was founded in 1948 and is headquartered in Westbrook Connecticut. The company manufactures flow metering, fluid pumping, and related products for industries such as aerospace, automotive, power generation, and medical equipment to customers around the world through its global distribution network. The company’s primary product lines include valves, flow restrictors, pumps, and plugs. The company also offers customized products for individual markets to meet specific standards for each industry according to individual customer needs.

    • CYCO & Dongguan Changyuan Spraying Technology Co., Ltd.

      • CYCO & Dongguan Changyuan Spraying Technology Co., Ltd.
        Spray Nozzles

      Manufacturer Overview

      CYCO & Dongguan Changyuan Spraying Technology Co., Ltd, founded in 1999 and based in Dongguan, China, is a manufacturer of spray nozzle in Asia. It offers an extensive product range, including high-flow carbide silicone spray nozzles, hollow cone spray nozzles, stainless steel mixing fluid spray nozzles, tank washing spray nozzles, and automatic air atomizing nozzles. The company holds ISO9001 and IATF16949 certifications, and meticulously manages the entire production process, from material selection and testing to processing and final product measurement. Serving diverse industrial applications, ensuring precise and quality spray solutions.

    • MARTIGNONI ELETTROTECNICA SRL

      • MARTIGNONI ELETTROTECNICA SRL
        NOZZLES

      • Italy Address: Corso Italia, 8, 20020 Vanzaghello MI, Italy

      Company Overview

      MARTIGNONI ELETTROTECNICA SRL was established in 1970 and is a manufacturer and supplier of corona treaters, antistatic systems, and electric transformers based in Vanzaghello, Milano, Italy. The company manufactures various products such as extruflex hp150, flammatore 3D, and charge generators. The products have been used in various application, including the installation of corona treater for extrusion coating lines and blown extrusion lines in factories. The company has participated in Labelexpo Europe 2023 with the company's own stand to present the products.

    • ABNOX AG
      • Switzerland Address: Langackerstrasse 25, Cham, Switzerland

      Company Overview

      ABNOX AG is a manufacturer and supplier of clamping, metering, and lubrication products that was established in 1946 in Cham, Switzerland. The company’s product portfolio includes metering valves, material pressure regulators, dosing devices, and modular units for combining lubrication and metering components. It also offers hand-push pumps, oil-level windows for indicating levels of liquid in containers, and various clamps for gripping workpieces or tools. The company’s products are commonly used in the food processing, automotive, and chemical processing industries, as well as in industrial machinery.

    • CHUMPOWER MACHINERY CORPORATION
      • Taiwan Address: No.688-1, Sec. 3, Zhongshan Rd., Wuri Dist., Taichung City, Taiwan

      Company Overview

      CHUMPOWER Machinery Corporation, established in 1981 and based in Taichung, Taiwan, is a manufacturer and supplier of machinery tools. The company's product range includes drill chuck, universal chuck, tap chuck, spindle clamping system, and spindle accessorize. These products are always used for precise drilling, tapping, and spindle operations. The company serves the manufacturing, metalworking, automotive, and aerospace industries. The company also offers product customization, maintenance, technical support, and research and development services.

    • PNR Italia Srl
      • Italy Address: Via Gandini 2, 27058 Voghera, Italy

      Company Overview

      PNR Italia Srl is based in Voghera, Pavia, Italy, and is a manufacturer and distributor of spraying products that was established in 1968 before its acquisition by the Spraylab Group in 2018. The company offers spray nozzles for creating different spray patterns or pressure levels, such as full cone, flat fan, and fog. It also offers hydraulic, pneumatic, and twin fluid atomizer models, along with tank washing heads for cleaning or sanitizing tank exteriors. The company mainly serves clients in the chemical, water treatment, and automotive industries.

    • Dosanova
      • Belgium Address: Molstraat 102/1 8870 Izegem, Belgium

      Company Overview

      Dosanova is an ISO 9001:2015-certified manufacturer and supplier of industrial cleaning system components that was established in 2008 in West Flanders, Belgium. The company primarily produces items for low- and high-pressure cleaning applications. These products include quick couplings or nipples, pressure washers, and nozzles with different threadings and range ratings. It also offers booster pumps and dosing systems for dispensers or public hygiene equipment. The company’s products are used mainly by clients in the food and beverage, automotive, and marine industries.

    • Sécheron
      • Switzerland Address: Rue du Pré-Bouvier 25 Satigny Geneva, Switzerland

      Company Overview

      Sécheron, with its establishment in 1989, operates as a manufacturer and supplier in the field of railway and transportation electrification. The company has its headquarters located in Geneva, Switzerland and it specializes in providing cutting-edge products and services that cater to the railway industry's needs, including circuit breakers, switchgear, and traction converters. It serves the railway and transportation industries, where its solutions are used in ensuring the efficient electrification of rail systems, helping to enhance the overall performance and safety of these critical modes of transportation.

      • Germany Address: Humboldtstrasse 32-36 Straubenhardt, Baden-Württemberg, Germany

      Company Overview

      Sommer-Technik GmbH is a manufacturer and supplier specializing in manufacturing automation solutions established in 1998 in Germany. It initially introduced the first sprayers for this purpose and have since expanded its offerings to include vacuum units, gripper systems, and various handling devices. It also offers vacuum and lubricating technology, delivering products like strip lubricators and non-fogging mini-atomizers. The company's product range includes products like power vacuum ejectors, suction cups, and vacuum manometers. These offerings serve industries reliant on automation and vacuum technology for optimized manufacturing processes.

    • Krautzberger
      • Germany Address: Stockbornstraße 13, Eltville am Rhein, Germany

      Company Overview

      Krautzberger, founded in 1902 and headquartered in Eltville am Rhein, Germany, is a manufacturer and supplier of surface technology products. The company develops surface coating products for various industries including automotive, textiles, pharmaceuticals, ceramics and cosmetics. Its product range includes spray guns, material pressure regulators, material feed containers, pumps and various coating systems like paint supply systems, steam technology, automatic surface spraying machine and painting robot. It allows its products to be tested in its technical center before buying. The company's certifications include ATEX and quality management and environmental management certification from ISO.

    • HENNLICH s.r.o.
      • Address: Českolipská 1996, 412 01 Litoměřice 1, Czech

      Company Overview

      HENNLICH s.r.o., Ltd., founded in 1991 and based in Litomerice, Czech Republic, is a manufacturer and distributor of industrial components and solutions. The company supplies components and technical solutions to almost all branches of industry, such as energy, engineering and hydro-tech. Its product portfolio consists of automation products, hydraulics for mining, bulk material loading and many others. The company is a member of the HENNLICH Group, which is operating in 17 countries of central and eastern Europe.

    • H.IKEUCHI & Co.,Ltd.
      • Japan Address: Daiichi Kyogyo Bldg., 1-15-15, Awaza, Nishi-ku, Osaka, Japan

      Company Overview

      H.IKEUCHI & Co.,Ltd., founded in 1954 and headquartered in Osaka, Japan, is a manufacturer and supplier specializing in spray nozzles, humidifiers, and related equipment. The company’s product portfolio includes humidifiers, air nozzles, hydraulic spray nozzles, pneumatic spray nozzles, and industrial-use pneumatic humidification systems. These products are utilized by various sectors, including livestock farming, greenhouse agriculture, food processing, textiles, and shipping and maritime. The company is ISO 9001:2015 certified and has offices in the USA, China, Taiwan, Indonesia, and the Netherlands to support its global network.

    • Spray Nozzle Engineering
      • Australia Address: 1-8 /27 Shearson Cres, Mentone, Victoria, Australia

      Company Overview

      Spray Nozzle Engineering was established in 1988 and is headquartered in Shearson Cres Mentone, Australia is a manufacturer, supplier, and distributor of industrial spray technology and accessories. The company offers a diverse product catalog including CIP tank cleaning hose reel systems, ruby trim needle jet nozzles, and air nozzle protection shroud systems. Additionally, it offers services such as technical maintenance, installation assistance, and customer training. These products find applications in vehicle and static fire protection, pharmaceuticals, and food and beverages.

    • Pentair
      • United Kingdom Address: Regal House, 70 London Road, Twickenham, London, United Kingdom

      Distributor Overview

      Pentair is a supplier of sustainable water solutions since 1966 and is based in St. Paul, Minnesota. The company serves the residential community by providing equipment for pools and spas and products for water softening and filtration to run through houses. The business industry benefits from the products that include commercial pool and spa equipment such as chemical controllers, heaters, lightings, and also valves and pumps for water supply as well as for water disposal. The Agricultural products include irrigation equipment and as for the Oil & Gas industry, there is the Biogas upgrading, CO2 Technologies, and much more.

    • Pro-Tek inc.
      • Canada Address: 901 Hérelle, Longueuil, Quebec, Canada

      Distributor Overview

      Pro-Tek inc. was founded in 1982 and is a supplier of paint and body shop equipment products based in Longueuil, Quebec, Canada. The company offers various products such as paint thickness testers, air control units, air dry guns, jetair waterborne drying systems, and HLVP pressure spray. The products are waterborne compatible with stainless steel sets and fluid passages. The products are supplied to the body shop and paint market industries. The company offers warranty for the products for up to 1 year after the purchase.

    • Shanghai Xinhou Spraying & Purification Equipment Co., Limited

      • Shanghai Xinhou Spraying & Purification Equipment Co., Limited
        Spray Nozzles

      • China Address: Building 28, No. 220, Jiugan Road, Sijing Town, Songjiang Area, Shanghai, China

      Distributor Overview

      Shanghai Xinhou Spraying & Purification Equipment Co., Limited, established in 2004 and based in Shanghai, China, is a supplier of spray nozzles. The company manufactures different nozzle types, such as flat fan spray nozzles, and adapter fittings. With this company located in many countries such as Russia, Italy, Germany, and Finland, customers can visit in person to inspect the office. The headquarters of this company is located in Shanghai Hongqiao Station and National Exhibition Center and exports its products to 20 countries. The company uses automatic processing equipment and some equipment developed with product traits to produce nozzles.

Spray Nozzle Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the spray nozzle page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. Pentair: 11,250
  2. Nordson Corporation: 7,331
  3. CKD: 4,660

Newly Established Company

  1. Zhuzhou Old Craftsman Precision Alloy Co., Ltd.: 2014 (10 years ago)
  2. Cleaning-Spray Intelligent Equipment Technology GuangZhou Co.,Ltd.: 2010 (14 years ago)
  3. Adam Pumps S.p.A.: 2010 (14 years ago)

Company with a History

  1. Armaturenwerk Hötensleben GmbH: 1859 (165 years ago)
  2. Lechler GmbH: 1879 (145 years ago)
  3. Düsen-Schlick GmbH: 1902 (122 years ago)

Spray Nozzle Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Spray Nozzle Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 11 19.0%
Germany Germany 11 19.0%
Italy Italy 6 10.3%
China China 6 10.3%
India India 4 6.9%
Spain Spain 3 5.2%
Japan Japan 3 5.2%
Taiwan Taiwan 2 3.4%
Switzerland Switzerland 2 3.4%
Canada Canada 2 3.4%
United Kingdom United Kingdom 2 3.4%
France France 1 1.7%
Romania 1 1.7%
Sweden Sweden 1 1.7%
Belgium Belgium 1 1.7%
Czech 1 1.7%
Australia Australia 1 1.7%

List of Spray Nozzle Products

11 products are listed.

Sonia Ultrasonic Spray Sprenovo-Tic corporation

Tic corporation

Sonia Ultrasonic Spray Sprenovo

40+ people viewing

Spray the "fluffy" fogged liquid with the vibration of piezo! Spray the fine particles of the liquid without pressure! Apply a liquid droplet of ab...


8 models listed

Pursuing the best performance and high graininess airbrush custom Micron series-ANEST IWATA Corporation

ANEST IWATA Corporation

Pursuing the best performance and high graininess airbrush custom Micron series

40+ people viewing

The best airbrush for all professionals. In pursuit of the best performance and high graininess, the ultimate finish was realized. ■ Features This...


3 models listed

Related Products

Slit Nozzles
Misting Nozzles
Air Nozzles
Air Blow Nozzles
Injection Nozzles
Brass Nozzles
Gun Nozzles
Plastic Nozzles
Tungsten Carbide Nozzles
Flat Fan Nozzles
Two-Fluid Nozzles
Blast Nozzles

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree