Kawatatek Co., Ltd.'s Chucks

■ Characteristics ・ Large φ700 (28 ") ・ Direct mounting (JIS ・ ASA) short taper A type ・ It can be replaced with an integrated claw type ・ T j...

10 models listed

• Clamps & Fasteners

• Chucks

Strong grasp and suitable for heavy shaving. The body is a trendy product and is powerful, and the claw material is SCM415. The claw part is a two ...

10 models listed

• Clamps & Fasteners

• Chucks

The jig mounting is a safety design of tap hole specifications. You can use the raw snail by replacing the standard one claws with the 46DJ series ...

10 models listed

• Clamps & Fasteners

• Chucks

It is a common chuck made of main body casting and has been used for a long time. The jig mounting can be used by replacing the safety design of ta...

9 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Built -in air cylinder inside the chuck ・ Ideal for flange processing with a standing machine ring center ・ Thin design

3 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Completed with cutting powder measures suitable for use on a standing lathe ・ Close mestroke diameter 30mm ・ Chuck size (φ70...

8 models listed

• Clamps & Fasteners

• Chucks

There are a claws and a two -piece type. The top of the chuck is a T groove or tap specification. ■ Characteristics ・ Made of main body casting ...

6 models listed

• Clamps & Fasteners

• Chucks

It has a built -in floating function for ring processing. The FLC type has a centrifugal correction function. ■ FLC series ・ Long jo -chirik 86mm...

7 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Made of main body casting ・ Chuck size 18 "to 71 (φ450 ~ φ1800) ・ With a cover for cutting powder on the top of the chuck ・...

10 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Made of main body casting (for normal cutting) ・ Chuck size 5 "to 24" (φ132 -φ610) ・ After attaching to the back plate, atta...

10 models listed

• Clamps & Fasteners

• Chucks

Chuck designed for the purpose of operating with a power wrench. ■ Automation and labor saving ・ This is a system that automatically tightens the...

• Clamps & Fasteners

• Chucks

This is a chuck used by attaching it to a table of the Ichele, a machineing center, and a 5 -axis processor table. Lightweight and thin, so it is l...

6 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Chuck size φ270, φ320 ・ Hydraulic mismanagement, manual discount

2 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Ideal for processing valves, joints, etc. ・ Chuck size 6 ”, 10”, 12 ” ・ Manual grasp, manual discount

3 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Chuck size 15 "to 28" ・ Manually grasp the processing -The method of determining is unlocked by turning the handle, and the m...

6 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Chuck size 15 "to 28" ・ Hydraulic mismanagement, manual discount ・ The tightening of the processing material is spindle, and...

5 models listed

• Clamps & Fasteners

• Chucks

It is thin, has a low center of gravity and has a large load. Because it is small and light, it does not burden Positioners and so on, so you can m...

3 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Chuck size (φ500 -φ1,200) ・ Light so that it can be used for positioners, etc., and the body width is made with a low center ...

5 models listed

• Clamps & Fasteners

• Chucks

■ Characteristics ・ Chuck size (φ600 -φ1,500) ・ When the pinion is turned, the three nails move (scroll chuck) ・ Three claws move at the same ti...

3 models listed

• Clamps & Fasteners

• Chucks

■ Operability ・ The handle position is on the front, and there is no interference with the table. ・ Use several chucks in parallel. ■ Dustproof ...

4 models listed

• Clamps & Fasteners

• Chucks