All Categories
History
This section provides an overview for polyvinyl chloride (pvc) as well as their applications and principles. Also, please take a look at the list of 14 polyvinyl chloride (pvc) manufacturers and their company rankings. Here are the top-ranked polyvinyl chloride (pvc) companies as of December, 2024: 1.HENAN JINHE INDUSTRY CO.,LTD, 2.DIAMOND PLASTICS CORPORATION, 3.Total Plastics International.
Table of Contents
Polyvinyl chloride, also known as PVC, is a synthetic resin.
By adding additives such as plasticizers, various properties can be obtained. For this reason, it is used as a raw material for a wide variety of products, including hard plastics, soft plastics, and rubber.
PVC is used in various applications because it is inexpensive, easy to process, and can develop a variety of properties by changing additives. PVCs are broadly classified into rigid PVC and flexible PVC, each of which has different applications.
Rigid PVC has a plasticizer content of 10% or less. Major applications include signboards and signs, pipes and fittings for water and sewage pipes, piping materials for corrosive gases and chemicals, and conduits for electric wires and wiring.
Flexible PVC contains 25~50% plasticizer. It is mainly available in sheet form (0.2mm or thicker), film form (0.2mm or thicker), leather (with fabric backing), and extruded forms. The applications for each are as follows:
The molecular structure of PVC is polymers formed by the polymerization of vinyl chloride monomers. Most products are straight polymers made solely from PVC monomers. Copolymers copolymerized with other monomers such as vinyl acetate and ethylene vinylidene chloride are also available.
PVC products are produced by blending the above PVC polymers with stabilizers, plasticizers, colorants, and other additives using various processing and molding methods. The main feature of PVC is that by changing the type and amount of additives, a wide range of functions can be achieved, such as hard plastic, soft plastic, and rubber.
The following is a comparison of PVC's characteristics with those of other general-purpose plastics, such as polyethylene (PE), polypropylene (PP), and polystyrene (PS).
PVC is made by polymerization of vinyl chloride monomers, and industrial manufacturing methods include suspension polymerization, precipitation polymerization, and emulsion polymerization.
Suspension Polymerization
Vinyl chloride monomer, polymerization initiator, and water are mixed and heated for polymerization in a pressurized polymerization tank. After the reaction, a slurry of PVC resin dispersed in water is obtained. After removing the remaining monomer, the powdered PVC powder is obtained by dehydration and drying.
Precipitation Polymerization
This is a method in which polymerization is carried out in a solvent in which the vinyl chloride monomer is dissolved but PVC is not. When the vinyl chloride monomer, initiator, and solvent are mixed and polymerized at a low temperature, PVC precipitates. This mixture is filtered to obtain a low-polymerization PVC powder.
Emulsion Polymerization
This is a method of polymerization in which vinyl chloride monomers, surfactants, water, and a water-soluble initiator are mixed. The monomer is emulsified in water and polymerized in the emulsion droplets. To recover the polymer after polymerization, the emulsifying and dispersing effect of the surfactant is eliminated by the addition of salt or acid, and the polymer is agglomerated, followed by dehydration and drying to obtain PVC powder.
PVCs are widely used for daily necessities such as food and toys. For this reason, various laws and regulations set standards, and industry associations have established voluntary standards to ensure the safety of PVCs.
For example, for products that come in contact with food such as plastic wrap, some laws require that the amount of residual vinyl chloride monomer be less than 1ppm. Also, the use of phthalate esters used in plasticizers is prohibited by certain laws. In addition, PVC used in blood bags and other products is subject to various standards.
*Including some distributors, etc.
Sort by Features
Sort by Area
Diamond Plastics Corporation is a manufacturer of water, sewer and irrigation piping solutions and is headquartered in Grand Island, Nebraska, USA since 1982. The company designs, manufactures, and supplies plastic pipes and fittings, including PVC pipes, PE pipes, and PP pipes. Its products such as IPS, C900 (4" THROUGH 12"), C900/TRANS-21 (14" THROUGH 60"), LOK-21, SANI-21 SDR35/26 and SANI-21 F679 are used in multiple industries, including plumbing, construction, and agriculture. The company also offers technical support, installation, and training services to ensure efficient utilization of its products.
JM Eagle is a manufacturer of plastic pipes and fittings that is headquartered in Century Boulevard Los Angeles, Califonia, USA since 1982. The company designs, manufactures, and supplies several polyvinyl chloride (PVC) or polyethene (PE) plastic pipes and fittings. Its product line includes Water/Sewer, Plumbing, Irrigation/ Agriculture, Gas/ Fittings and Electrical/Communications. Its products are used in a multiple of industries, including plumbing, construction, and agriculture. The company also offers technical support, installation, and training services to ensure efficient utilization of its products.
Total Plastics International (TPI) is an American distributor of industrial plastic products originally founded in 1978 as a small plastics warehouse before expanding to regional operations in 1984. Based in Kalamazoo, Michigan, the company primarily stocks sheets, films, tubes, and rods fabricated from various plastic materials including PVC, acrylic, polyethylene (PE), and polycarbonate (PC). They also offer marine-grade composite panels and high-density polyethylene (HDPE) with applications in the manufacture of boat components and parts, such as hatches or ladders. TPI operates 15 locations across the United States, and chiefly serves clients in the automotive, marine, medical, and aerospace sectors.
LG Chem has been a manufacturer and supplier of Chemicals since 1947 having its headquarters in South Korea. The company designs Petrochemical products such as Acrylate which is used in adhesives, and Polymer Catalysts which are used in making Synthetic Rubber. They also make Advanced Materials like Anode Binders which have applications in the manufacturing of batteries and other materials like LUCEL which is an engineering plastic based on POM used to make switches and gears. They also make Reagents for Allergy Tests, Allergens, and Systems to serve the Life Sciences industry.
Ensinger, founded in 1966 in Germany as solely a manufacturer of plastics for commercial customers, has grown to manufacture performance and engineering thermoplastics for numerous industries worldwide. The company's products include plastic compounds, extruded semi-finished products, injection-molded finished parts, as well as compressed and cast-formed parts. Ensinger serves the plant engineering, building construction, automotive, aerospace, medical, and food markets, among many other industries. The company has over 30 international production and sales locations, serving customers across the globe.
Baruffaldi Plastic Technology S.r.l., founded in 1953, is an Italian manufacturer headquartered in Fusignano, Ravenna, producing plastic extruder machines and tools. The company's product range, marketed under the Barruffaldi brand, includes automatic in-line and off-line machines for plastic profile extrusion. The company also develops extrusion tools and lines, punching machines for cable ducts, and customized machines. Since the acquisition of PRIMAC S.n.c. in 2012, the company has expanded its offerings to include pipe extrusion technologies, including downstream equipment for the automotive, electronic, and medical sectors, under the Primac brand.
AGC Inc., founded in Amagasaki, Japan, in 1907 is a supplier of flat, automotive, display glass, chemicals, ceramics and other high-tech materials and components. The company's product portfolio includes Architectural glasses, Automotive glasses, Architectural Materials, performance chemicals and Biopharmaceuticals. Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense. They also offer custom packaging, warehousing, customer service and distribution services.
Kaneka Corporation, founded in 1949 and headquartered in Minato-ku, Japan, is a manufacturer and supplier specializing in material, quality of life, health care, and nutrition solutions. The company offers an extensive service portfolio including performance polymer solutions vehicles, foam and residential tech, performance fibers solutions, pharma and supplemental nutrition solutions, and foods and agris solutions among others. These offerings cater to various industries, serving as tougheners for thermosetting resins, providing transparent curable resins with heat and light resistance, offering photovoltaic power generation systems for public and industrial installations, and supplying affinity chromatography resin for monoclonal antibody purification, among other applications.
Teknor Apex is a polymer manufacturer that delivers essential products spanning bottles, boots, dashboards, and earbuds. Since its establishment in 1924, the company has emerged as a preferred source for tailored polymer solutions, showcasing expertise across six distinct divisions and nearly a century of operational history. Standing out with its unparalleled material testing and quality control capabilities, the company propels advancement through its team and state-of-the-art laboratories. As a privately held entity guided by unwavering ethical principles, it places substantial emphasis on fostering customer relationships.
Shin-Etsu Chemical Co., Ltd., founded in 1926 in Japan, is a manufacturer and distributor of synthetic chemicals and electronic materials, such as semiconductor silicon and rare earth quartz. The company offers a wide range of products, including silicone sealants and rubbers, as well as cellulose derivatives used in foods and pharmaceuticals, and rare earth magnets. The company has four core business segments, including infrastructure chemicals, electronics materials, silicone-based functional agents, and specialized engineering for the development of plant design, construction, and maintenance.
Özgenç Makina, a subsidiary of Motor Kompressor Makina (MSK) San. Tic. Ltd. Şti., is a Turkish manufacturer based in Nilüfer, Bursa, producing door and window manufacturing equipment. The company's machines, designed for unplasticized polyvinyl chloride (uPVC) windows, include polyvinyl chloride (PVC) profile cutting and welding machinery, screwing centers, and corner cleaning devices. It also produces aluminum window machinery, including aluminum profile cutting and machining centers, glazing bead cutters, and corner crimpers. Its offerings extend to wooden door manufacturing equipment such as door panel cutters, door frame formers, and banding machinery. With ISO:9001 certification, the company serves customers across 79 countries worldwide.
Port Plastics, an American company established in 1961 and based in the City of Industry, California, is a manufacturer and supplier of industrial plastic solutions. The company offers a range of products including PI polyimide grades, polycarbonate materials, and polypropylene sheets and rods. These products find application in various industries, including semiconductor manufacturing, aerospace and defense, and the food and beverage industry. The company provides services including technical support and customized products based on the customers’ needs and requirements.
HENAN JINHE INDUSTRY CO.,LTD, founded in Zhengzhou, Henan, in 2009 is a supplier of chemical products such as Oxide Pigments, Titanium Dioxide, Carbon Black, and Chrome Oxide Green. The company's product portfolio includes Anhydrous Aluminum Chloride, Pharmaceutical Intermediate, Basic Chrome Sulphate, Potassium Hydroxide and Sodium Hydrosulfite. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and healthcare. The company exports around 100 countries in Asia, Europe, North and South America and Africa.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | HENAN JINHE INDUSTRY CO.,LTD |
15.3%
|
| 2 | DIAMOND PLASTICS CORPORATION |
13.0%
|
| 3 | Total Plastics International |
10.4%
|
| 4 | JM Eagle |
8.7%
|
| 5 | Teknor Apex |
8.3%
|
| 6 | OTECH Corporation |
7.4%
|
| 7 | AGC Inc. |
6.4%
|
| 8 | Ensinger |
5.6%
|
| 9 | KANEKA CORPORATION |
5.6%
|
| 10 | Shin-Etsu Chemical Co., Ltd. |
5.2%
|
Derivation Method
The ranking is calculated based on the click share within the polyvinyl chloride (pvc) page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
4 | 40.0% |
|
Japan
|
2 | 20.0% |
|
Republic of Korea
|
1 | 10.0% |
|
Germany
|
1 | 10.0% |
|
Italy
|
1 | 10.0% |
|
Turkey
|
1 | 10.0% |
38 products found
38 products
Ishizuka Co., Ltd.
60+ people viewing
Last viewed: 18 hours ago
Fast Response
The crystal tarpo "CT-1055-3 cold-resistant transparent" uses "high-strength polyester thread" for the base cloth, and is thick and strong at "0.55...
Untack Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
Very Fast Response
■PVC (vinyl chloride resin) color information ・[Transparent]: Blue, green, yellow, red, colorless and transparent ・[Opaque]: Blue, green, yellow,...
Untack Co., Ltd.
70+ people viewing
Last viewed: 43 minutes ago
Very Fast Response
■PVC (vinyl chloride resin) color information ・[Transparent]: Blue, green, yellow, red, colorless and transparent ・[Opaque]: Blue, green, yellow,...
Untack Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Very Fast Response
■PVC (vinyl chloride resin) color information ・[Transparent]: Blue, green, yellow, red, colorless and transparent ・[Opaque]: Blue, green, yellow,...
Untack Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
Very Fast Response
■PVC (vinyl chloride resin) color information ・[Transparent]: Blue, green, yellow, red, colorless and transparent ・[Opaque]: Blue, green, yellow,...
Untack Co., Ltd.
40+ people viewing
Last viewed: 10 hours ago
Very Fast Response
■PVC (vinyl chloride resin) color information ・[Transparent]: Blue, green, yellow, red, colorless and transparent ・[Opaque]: Blue, green, yellow,...
Drapas Co., Ltd.
40+ people viewing
Fast Response
■Color engraving board (Koueidou) It is an enbi board that can be used for various model scenes. Easy to process, A4 size, easy to use, and availab...
Drapas Co., Ltd.
30+ people viewing
Last viewed: 15 hours ago
Fast Response
■Enbi board for models (0.5mm thickness) It is a thick 0.5mm thick engineered board. It expands the range of model production.
Drapas Co., Ltd.
50+ people viewing
Last viewed: 7 hours ago
Fast Response
■Features Made of PVC (vinyl chloride), only 0.1mm thick. The beauty of the finish is outstanding. It can be used for indoor and outdoor signboards...
Drapas Co., Ltd.
30+ people viewing
Last viewed: 3 hours ago
Fast Response
■Features Base material: PVC, film thickness: 100μmm, adhesive color sheet with a wide variety of colors. Easy to apply by simply peeling off the r...
Yumoto Electric Co., Ltd.
20+ people viewing
Last viewed: 7 hours ago
Fast Response
5.0 Company Review
■Advantages It is a low-cost resin that can be used in a variety of places, and is especially often used around water. It is easy to weld, bond, an...
TP Giken Co., Ltd.
40+ people viewing
Standard Response
Sakurai Co., Ltd.
430+ people viewing
Last viewed: 12 hours ago
4.0 Company Review
There are other model numbers available.
10 models listed
Sambic Co., Ltd.
350+ people viewing
Last viewed: 9 hours ago
Sambic's name for polyvinyl chloride (PVC) flexible films and sheets. Polyvinyl chloride, a synthetic resin material, was developed in the 1940s us...
5 models listed
Daido Hunt Co., Ltd.
160+ people viewing
Last viewed: 8 hours ago
■Features ・It is a twisted wire of 4 wires coated with PVC (polyvinyl chloride). - Suitable for binding, fastening, etc. in agriculture, gardening...
2 models listed
Murakami Dengyo Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
■Appearance transparent, gray ■Size of vinyl chloride board (rigid/standard product) The width is 1,000, the length is 2,000, and the thickness is...
Akitsu Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
Excellent flame retardancy, durability, oil resistance, mechanical strength, and chemical resistance
10+ people viewing
Last viewed: 3 hours ago
■Features ・Polyvinyl chloride resin (PVC) is hard and soft, has excellent mechanical properties, chemical resistance, acid resistance, alkali resi...
Fujieisyscom Co.,Ltd.
120+ people viewing
Last viewed: 6 hours ago
Standard Response
Zebra Premier PVC Card (CR-80)
Fujieisyscom Co.,Ltd.
60+ people viewing
Last viewed: 4 hours ago
Standard Response
Zebra Premier Recycled PVC Card
Fujieisyscom Co.,Ltd.
110+ people viewing
Last viewed: 7 hours ago
Standard Response
Zebra Premier Plus Composite Card (CR-80)
Fujieisyscom Co.,Ltd.
60+ people viewing
Last viewed: 1 day ago
Standard Response
ISO-14443 Type A compliant, frequency: 13.56 MHz
Fujieisyscom Co.,Ltd.
120+ people viewing
Last viewed: 11 hours ago
Standard Response
■Summary ・ISO/IEC18000-6 Type C (EPCglobal® Gen 2) compliant, frequency: 860-960 MHz ・NXP G2XM (user memory 512 bits, EPC memory 240 bits) ・Impi...
Murakami Dengyo Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
We not only sell the following materials, but also provide processed products using the materials listed below, provide them in the size (cutting s...
